How to Fix Bosch Washer Error 0:00 / H:00 / –:–
Cycle finished.
510 repair guides
Choose the appliance, then find the exact code. Every guide leads with what the code means, what to try first, and whether a part or replacement is worth considering.
Bosch
Cycle finished.
Indicates a problem with the water supply or inlet.
If this symbol goes out on the display panel, it is possible to add more laundry.
Indicates that the AntiStain program is selected, which targets specific types of stains.
Indicates an issue with the motor, often related to its communication with the control board.
Child Lock Activated.
Indicates the wash programme for cotton fabrics. Often represented by a T-shirt icon.
There is a problem with the drainage system; the machine is having trouble draining water.
A motor error has occurred, which could be due to worn motor brushes or a wiring issue.
Indicates a gentle wash programme for delicate fabrics like silk. Often represented by a feather symbol.
Indicates the status of the i-DOS automatic dosing system.
Door is open. The cycle will not start until the door is closed.
Indicates that the drum clean program should be run or is currently running.
Pump Blocked.
Water Detected in Base or Leak Present.
A fault with the turbidity sensor has been detected.
Motor fault.
Door is not closed.
Blocked pump.
Door is open or not locked properly.
Water supply error; pump time has exceeded its limits.
Drainage Error; blockage in the filter or drainage system.
Unexpected heating during the cycle.
AquaStop Hose has been activated; indicates a leak.
Turbidity sensor issue.
Analogue pressure sensor issue.
Flow sensor issue.
Drain pump is blocked or has timed out.
Laundry imbalance detected.
Detergent foam detected.
Door Not Locked Properly.
Door lock fault; the machine is unable to lock the door.
Drain pump fault or drain system blockage.
Overfilling of the machine has been detected, possibly due to a faulty pressure switch or a stuck valve.
The pressure chamber is blocked and requires manual cleaning.
An issue with the door unlocking mechanism, which could be jammed or have a control board fault.
Motor fault detected, often related to the motor tacho or carbon brushes.
The door was detected as being opened during a cycle, triggering a safety override.
A communication error has occurred within the control module.
Motor temperature sensor fault.
Undervoltage detected at the motor module.
Overvoltage detected at the motor module.
Motor overcurrent or general motor fault.
Unexpected communication error in your washing machine.
Motor/inverter module communication error or voltage issue.
Flow sensor fault.
A range of faults related to the heating circuit, often connected to temperature sensors or the heating element.
Incorrect door lock signal or door cannot be locked.
Main control module (PCB) coding or software fault.
Fault in Drive Circuit.
Inverter fault.
Software or board error.
Software or board error.
Software or board error.
Activates a gentle tumble after the final spin to reduce creasing.
Indicates that the program has ended, but there may be a drain issue to check if the cycle has not…
Shows the relative energy consumption for the selected program.
Activates up to three additional rinse cycles, recommended for sensitive skin or very soft water.
The door of the loading hatch is not closed.
Water is not supplied.
Problems with draining the water (water does not drain).
Water leakage.
Uncontrolled motor start; motor is running without being commanded to.
NTC (temperature sensor) open circuit on the heating element.
NTC (temperature sensor) short circuit on the heating element.
Door was open when the cycle was commanded to start.
Unexpected heating; the machine is heating when it should not be.
Communication error between electronic modules.
Overheating detected by the NTC sensor.
Mains voltage is too high.
The hatch door is not closed or is not locked properly.
Time of water intake exceeded; water supply error.
Water drain time exceeded; blockage in the filter or drainage system.
Water heating time exceeded.
Unexpected heating during the cycle.
Uneven drum rotation, engine problems, or a faulty tacho generator.
NTC sensor malfunction.
Aquastop activated; indicates a leak.
Turbidity sensor malfunction or issue.
Analog pressure sensor error or issue.
Pressure sensor error.
Flow sensor malfunction or issue.
No water flow in the flow sensor detected.
Maximum water level exceeded.
Unbalanced load detected. The washing machine's spin cycle has been interrupted because the laundry is unevenly distributed.
Excess foam has been detected in the drum.
Door lock error.
Door lock cannot be unlocked at the end of the cycle.
The lock system is faulty.
Faulty NTC (temperature sensor).
Fault NTC (temperature sensor) short circuit.
Synchronization error.
Uncontrolled high engine speed.
Motor error.
No motor rotation.
Indicates a motor fault, where the control system receives irregular feedback from the drive motor or tachogenerator (speed sensor).
Motor or inverter module error.
3D sensor: measurement error too high or too low.
Flow sensor or pressure sensor error.
Wrong door signal.
Internal software error on the main control board.
Software error.
Card error.
Software or board error.
Too much foam has been detected during the wash cycle.
Allows for setting the automatic detergent dosing to light, medium, or heavy, depending on the soil level of the laundry.
Indicates the automatic dosing system for liquid detergent and fabric softener is active.
The programme duration is extended by up to 30 minutes.
The child lock is activated.
Displays the recommended maximum load weight for the selected program.
You can save a selected programme with your favourite settings.
Displayed on some basic models to indicate that water is not entering the machine, similar to an E17 error.
Indicates that the pre-wash option has been selected.
Reduces creasing by using a lower spin speed, leaving clothes damper for easier ironing.
Remote start via the Home Connect app is activated.
The laundry will remain in the water after the last rinse cycle.
Indicates that the machine is in the rinse cycle.
The audible signal at the end of the programme is deactivated and the final spin speed is reduced.
Indicates a cold wash setting.
Before the main wash cycle starts, the laundry remains in the water for longer.
Indicates the selected spin speed in revolutions per minute (RPM).
Water supply issue; water pressure is too low or the inlet hose is blocked/kinked.
Indicates the temperature setting for the wash cycle.
Unbalanced load detected. The washer is attempting to redistribute the laundry.
Shows the relative water consumption for the selected program.
Increases the water level during the wash and rinse cycles.
Indicates the wash programme for woollen items. Often represented by a ball of yarn symbol.
Bosch
The childproof lock is activated, locking the control panel.
Reminder to run the basic appliance care program.
Indicates the "Ready in" time, meaning the dryer has been set to start after a specified number of hours.
The anti-crease function is activated.
The anti-crease function is activated.
The anti-crease function is activated.
The dryer needs maintenance.
The lint filter needs to be cleaned.
The lint filter needs to be cleaned.
The lint filter needs to be cleaned.
The heat exchanger is undergoing an automatic self-cleaning cycle.
The "Ready in time" symbol, indicating the dryer has been set to finish after a specified time.
Indicates a successful connection to the Home Connect app.
The water collection container needs to be emptied.
The water collection container needs to be emptied.
The water collection container needs to be emptied.
The appliance is in a cooling down process after a high-heat cycle to safely reduce internal temperatures.
The appliance is in a cooling down process after a high-heat cycle to safely reduce internal temperatures.
Do not tumble dry.
Do not tumble dry.
Do not tumble dry.
Do not tumble dry.
Indicates that the 'Cupboard Dry' cycle is in progress, meaning laundry will be dry enough to store.
Indicates that the 'Cupboard Dry' cycle is in progress, meaning laundry will be dry enough to store.
Indicates that the 'Cupboard Dry' cycle is in progress, meaning laundry will be dry enough to store.
Door is not properly closed or there is a drainage problem.
Laundry should be laid out flat to dry.
Laundry should be laid out flat in the shade to dry.
Indicates a leak in the appliance.
Indicates a leak in the appliance.
Unbalanced load detected.
Low water pressure or blocked filters in the water inlet.
Lint filter is blocked.
Lint filter is still blocked or wet.
Condensation drainage hose is blocked or kinked.
Overloading of the dryer.
Heating circuit fault.
Electronics fault.
Electronics fault.
Overheating, often due to a clogged lint filter or poor ventilation.
Severe overheating, typically due to a blocked lint filter or exhaust vent.
Maximum drying time exceeded.
Door is open or not properly closed.
Door is open or not properly closed.
Door is open or not properly closed.
Lint screen temperature sensor (NTC) error.
Heater temperature sensor (NTC) error.
Unexpected heating.
Control module failure; Fault with the dryer's electronic components
Defective control module.
Control module failure; Fault with the dryer's electronic components
Electronics fault.
Control module failure; Fault with the dryer's electronic components
Control module failure; Fault with the dryer's electronic components
Control module failure; Fault with the dryer's electronic components
Electronics fault.
Compressor inverter - blocked rotor.
Unbalanced load detected.
Unbalanced load detected.
Unbalanced load detected.
Too much foam has been detected.
Too much foam has been detected.
Too much foam has been detected.
Door is not locked properly.
Door is not locked properly.
Door is not locked properly.
Problem with the water drain; potential blockage in the drain tube, hose, or pump.
Points to a problem with the dryer's air flap or vent system, affecting air flow.
Dryer Motor Control Error.
Communication error between the control board and other components, or a problem with the moisture sensor.
Implausible or missing variant coding.
Heating element failure or issue with the heating system.
Fault in the drive circuit.
Heating element relay error.
Power supply to the dryer is malfunctioning.
Electronics fault.
Water pressure is too low or no water is available.
The condensation water container is full and needs to be emptied.
The condensation water container is full and needs to be emptied.
The condensation water container is full and needs to be emptied.
The condensation water container is full and needs to be emptied.
Represents air drying; items should be hung on a clothesline or laid flat.
Represents air drying; items should be hung on a clothesline or laid flat.
The current program has finished.
Faulty inlet valve.
The machine has been unable to pump out water, likely due to a blockage.
Heating system malfunction or overheating due to blocked fluff strainer, air cooler, or air circuit.
Indicates a fault with one of the machine's sensors, a cable break or short-circuit in the NTC door sensor, or…
Drying does not work, which could be due to a clogged drying capacitor or a full condensate collecting vessel. It…
The program has failed or there is a communication error.
Electronics problem; may require diagnostics and replacement of the power unit.
Electronics problem; the unit may need to be dried.
Electronics problem; requires diagnostics for the flowing blow-dryer.
Evaporation level regulator has failed.
Water inlet valve error.
Drainage issue or fault with the heating element during the drying cycle.
Motor-related fault, often due to a malfunctioning tachogenerator.
Open outlet thermistor or an issue with the temperature sensor.
Analogue pressure sensor issue.
Faulty pressure sensor.
Water in the base of the machine has been detected.
Communication error between the machine control and motor control.
Issue with the carbon brushes in the motor.
Communication fault between the power boards or an inverter failure.
Implausible door lock status.
Implausible signal from the door switch.
Control board or door lock issue preventing start-up.
Flow sensor frequency is too high.
Implausible or missing variant coding.
Circulation pump operation after switch-off.
Salt container lid contact fault (on models with this feature).
Indicates the low heat drying setting is active, which is suitable for delicate fabrics.
Unbalanced load.
No water during the drying phase (needed to rinse the condenser).
Issue with the hot water tap, supply hose, or water pressure.
The heat exchanger needs cleaning.
The heat exchanger needs cleaning.
Represents the standard drying cycle suitable for most fabrics.
The appliance is in the cooling down process after a high-temperature cycle.
The dryer is in the 'Iron Dry' mode, leaving clothes slightly damp for easier ironing.
The dryer is in the 'Iron Dry' mode, leaving clothes slightly damp for easier ironing.
The dryer is in the 'Iron Dry' mode, leaving clothes slightly damp for easier ironing.
The childproof lock is activated, locking the control panel.
The childproof lock is activated, locking the control panel.
Laundry should be hung on a clothesline in the shade to dry.
Laundry should be hung on a clothesline to dry.
Gentle drying for delicate fabrics is activated.
Gentle drying for delicate fabrics is activated.
Gentle drying for delicate fabrics is activated.
Indicates that the drying cycle has been paused.
The drying cycle has been temporarily stopped.
The drying cycle has been temporarily stopped.
A program that reduces noise levels is active.
A program that reduces noise levels is active.
The dryer has been started remotely via a mobile app.
The dryer has been started remotely via a mobile app.
The dryer has been started remotely via a mobile app.
Allows adjustment of the drum's spin speed.
Allows adjustment of the drum's spin speed.
Suitable for tumble drying.
Suitable for tumble drying.
Suitable for tumble drying.
Gentle drying at a low temperature.
Gentle drying at a low temperature.
Gentle drying at a low temperature.
Indicates that the item can be dried at the highest temperature.
Normal drying at a regular temperature.
Normal drying at a regular temperature.
Normal drying at a regular temperature.
Normal drying at a regular temperature.
Dry flat; laundry should be laid out on a flat surface to dry.
Dry flat; laundry should be laid out on a flat surface to dry.
Line dry; laundry should be hung on a clothesline.
Line dry; laundry should be hung on a clothesline.
Fabric should be dried in the shade, away from direct sunlight.
Fabric should be dried in the shade, away from direct sunlight.
Drip-dry; hang items on a line while still dripping wet.
Drip-dry; hang items on a line while still dripping wet.
Indicates that a preferred or 'favourite' drying setting is being used for the current cycle.
Indicates that the drying cycle has been started or paused.
Indicates that low heat drying is active, which is gentler for delicate fabrics.
Indicates that low heat drying is active, which is gentler for delicate fabrics.
The "Drying Level" function is activated.
The drying cycle has been set for a specific length of time.
The drying cycle has been set for a specific length of time.
The drying cycle has been set for a specific length of time.
Indicates that the cycle has started or is paused.
Indicates that the cycle has started or is paused.
Dry gently with cold air only.
Shows the WiFi connection status: Flashing (connecting), Lit (connected), Off (disconnected).
Shows the WiFi connection status: Flashing (connecting), Lit (connected), Off (disconnected).
Bosch
Indicates a temperature issue or that a door is not properly sealed.
A temperature sensor has failed or the temperature is outside the measurable range. The affected compartment (fridge or freezer) will…
The temperature inside the refrigerator is rising.
The temperature inside the refrigerator is rising.
All display segments are lit, indicating a system self-test. This typically occurs for a few seconds upon initial power-up or…
The AirFresh filter is operational, reducing odors within the refrigerator.
Temperature alarm, indicating the freezer compartment is too warm.
Indicates that a warning signal, often due to a high temperature in the freezer, has been acknowledged by pressing the…
System warning alarm is OFF.
A feature, often represented by a bottle icon and a timer, used to quickly chill beverages for a set period.…
Communication Fault. There is a communication error between the main control board and the user interface/display board.
General electronics fault.
The appliance is in "Demo" or "Showroom" mode. The lights and display will function, but the cooling system (compressor and…
Freezer door switch is defective or the door has been open for more than one hour.
A fault or error in the door sensor circuit.
General electronics fault.
Refrigerator compartment temperature sensor is faulty.
Freezer compartment temperature sensor is faulty.
Temperature-controlled drawer temperature sensor is defective.
Freezer door is open.
Ice maker sensor failure.
Water dispenser sensor issue.
Condenser fan failure.
Evaporator fan failure.
Communication error between control boards.
Main control board module is defective.
Display control module is defective.
Ambient temperature sensor is defective.
Communication error between the main control board and the display control module.
Communication error between the display control module and the ice and water dispenser control module.
Ice maker motor fault. The control board has detected an issue with the ice maker's motor operation.
Ice maker sensor fault. The control board has detected an issue with a sensor within the ice maker assembly.
The refrigerator is in energy-saving mode.
Evaporator Fan Fault. The fan in the fresh food compartment is not working correctly.
Temperature sensor failure.
Defrost sensor issue.
Refrigerator door open.
Freezer door open.
Ice maker sensor failure.
Water dispenser sensor issue.
Condenser fan failure.
Evaporator fan failure.
Communication error between control boards.
Compressor issues.
Door cable damage.
Door cable damage.
The temperature inside the refrigerator or freezer is too high. This can be caused by the door being left open,…
"Fresh mode" is activated to keep food fresh for longer.
Home Connect status indicator. Displays the status of the refrigerator's connection to the Wi-Fi network for smart features.
Indicates that the automatic ice maker is turned on and operational.
The lock for changing settings is enabled.
The MultiAirFlow system is active, circulating cool air to maintain consistent temperatures.
Power Outage. This code appears after the appliance regains power following an outage, alerting the user that the internal temperature…
Indicates a temperature issue or that a door is not properly sealed.
Replace Filter. The water filter has reached the end of its service life and needs to be replaced.
Disables all non-essential functions for religious observances, such as interior lights, audible signals, and digital displays.
Disables all non-essential functions for religious observances, such as interior lights, audible signals, and digital displays.
Indicates that the "Super" or "Super Freeze" mode is activated. This mode is used to rapidly cool the freezer.
Indicates that the "super cooling" or "super freezing" function is active, which rapidly lowers the temperature.
Sets the refrigerator to an energy-saving mode when you are away for an extended period.
Sets the refrigerator to an energy-saving mode when you are away for an extended period.
Indicates that the VitaFresh system, which controls temperature and humidity to keep food fresh, is active.
Indicates the status of the water filter. It may change color or flash when the filter needs to be replaced.
Bosch
Indicates a control board communication failure. This could be due to loose ribbon cables, a faulty control board, or a…
Indicates a 24-hour delay start has been set.
No faults detected; the dishwasher is in diagnostic test mode.
Washes and dries dishes in approximately one hour.
Indicates a fault with the aqua sensor (turbidity sensor), which monitors the soil level of the wash water. This can…
The dishwasher automatically adjusts the temperature and wash time based on how dirty the dishes are.
The automatic wash cycle is selected.
The automatic wash cycle is selected.
The automatic wash cycle is selected.
Can indicate the end of a cycle, an improperly closed door, or drainage issues.
The dishwasher is currently in the washing cycle.
The dishwasher is currently in the washing cycle.
The dishwasher is currently in the washing cycle.
Indicates a problem with the water supply, such as a blockage or the tap being turned off.
Indicates a problem with the water supply, such as a blockage or the tap being turned off.
Indicates that the child lock feature is activated, preventing accidental operation.
Indicates that the child lock feature is activated, preventing accidental operation.
Allows the user to set a delayed start time for a wash cycle.
Allows the user to set a delayed start time for a wash cycle.
An icon, often with a number like '500' and radiating lines, indicating the item is certified to withstand a specific…
A symbol, which can vary in appearance but often shows plates or glasses in a dishwasher basket, indicating that an…
Indicates that the dishwasher is in the drying phase of the wash cycle.
Indicates that the dishwasher is in the drying phase of the wash cycle.
Heat pump motor circuit fault at the main control board.
Main control board relay fault/error.
Main control board relay fault/error.
Wash arm diverter circuit in main control board fault/error.
Door sensor circuit fault/error.
Indicates an overheating at the main connection, leading to the end of the program.
This error points to a failure in electronics communication.
Main control board relay fault.
Main control board relay fault.
Faulty electronics in the self-test, often related to the heater.
Wash arm diverter circuit fault on the main control board.
Door sensor circuit fault.
Zeolite (CrystalDry) fan motor fault.
Loss of water during a cycle. The water level has dropped unexpectedly.
Internal heater fault within the heat pump.
Zeolite (CrystalDry) chamber heater fault.
Fault with the thermostat or temperature sensor (NTC Thermistor).
Limescale build-up in the heat pump.
The water temperature is too high (above 75°C).
Flow meter failure or an issue with water flowing into the dishwasher.
Water leak detected in the base, activating the safety switch.
Issue with water flowing into the dishwasher or the filling system.
Issue with water flowing into the dishwasher or the filling system.
Low water level or issue with water flow.
Detergent dispenser solenoid circuit error.
Heat pump internal heater error.
This code signifies a fault with the circulation motor or an internal heater fault within the heat pump.
Heat pump internal heater error.
Blocked heat pump.
Indicates an interruption in the Zeolite heater heating circuit. The dishwasher will operate without the Zeolite drying system.
Blocked heat pump.
Blocked filter.
Issue with the drain pump (blocked, clogged, or faulty).
Dishwasher not draining properly due to a blocked drain filter.
Drain pump is blocked or the pump cover is loose or missing.
Fault with the water diverter motor or water switch.
Low voltage in the power supply.
AquaSensor (turbidity sensor) fault.
Low mains voltage; the dishwasher is receiving insufficient voltage to operate.
Voltage is too high.
This error code points to a filling fault where there are no impulses from the flow sensor, even though water…
Indicates a problem with the heat pump or moisture sensors related to the drying system. It can also signal a…
Water leak detected in the base.
Indicates an issue with the water supply, such as a kinked inlet hose, a turned-off water valve, or a jammed/scaled…
Water inlet or overfill issue.
Water inlet or overfill issue.
Circulation pump fault - open circuit to circulation pump, resistance values wrong, or pump is blocked.
A fault with the drain pump, where residual water is detected in the sump, possibly due to dirty filters. It…
Open circuit to drain pump or resistance values of drain pump are wrong.
The drain pump is blocked or the pump cover is loose.
Indicates a drainage problem, where the non-return valve may be letting water by, or the drain pump cover is missing…
Indicates a leak or water flow restriction. It can also signify a communication issue with the motherboard.
Problem with the power supply, specifically low voltage. The machine detects insufficient voltage and stops to protect its electronic components.
The filters are soiled or blocked.
A standard program for normally soiled dishes, which is the most efficient in terms of combined energy and water consumption.
The energy-saving eco cycle is selected.
The energy-saving eco cycle is selected.
The energy-saving eco cycle is selected.
A brushless motor that is quieter, more efficient, and has a longer lifespan.
A brushless motor that is quieter, more efficient, and has a longer lifespan.
Signals that the wash cycle has completed and the dishes are clean.
Signals that the wash cycle has completed and the dishes are clean.
A quick wash cycle at 45°C for lightly soiled items.
A quick wash cycle at 60°C.
Indicates that the Extra Dry option is selected, which uses a higher temperature during the final rinse and a longer…
Indicates that the Extra Dry option is selected, which uses a higher temperature during the final rinse and a longer…
A general water filling fault, which can mean the dishwasher is not filling with water, is underfilled, or is overfilled.
Water intake fault at the start of a cycle, with no pulses detected from the flow meter.
Bad EEPROM Identification/Checksum error.
Water intake fault where the heater pressure switch registers no or insufficient water pressure at the circulation pump during the…
The water protection system has been activated to prevent flooding.
The water pump is blocked.
A star icon that allows you to save and quickly access your most frequently used dishwashing program and option combination.
A symbol of a wine glass and a fork, indicating that the material is safe to come in contact with…
Diverter triac fault on the main control board (PCB).
Represents a gentle cleaning cycle with lower temperatures (around 40°C) and an extended drying period, designed for delicate glassware.
Represents a gentle cleaning cycle with lower temperatures (around 40°C) and an extended drying period, designed for delicate glassware.
Indicates a heating problem, which could be due to a faulty heating element, thermostat, or a wiring issue.
Allows for running a wash cycle with a smaller load to save water and energy.
Allows for running a wash cycle with a smaller load to save water and energy.
Indicates the dishwasher is connected to Wi-Fi and can be controlled via the Bosch Home Connect app.
A hotter final rinse is held for longer for a higher anti-bacterial performance.
A hotter final rinse is held for longer for a higher anti-bacterial performance.
Indicates a feature that uses a hotter final rinse (up to 70°C) for a higher anti-bacterial performance.
Indicates a feature that uses a hotter final rinse (up to 70°C) for a higher anti-bacterial performance.
A symbol, often a large pot and two plates, representing a heavy-duty program that uses high temperatures and increased spray…
The intensive or heavy-duty cycle is selected.
The intensive or heavy-duty cycle is selected.
An option that increases spray pressure and temperature in the lower basket for heavily soiled pots and pans, while the…
An option that increases spray pressure and temperature in the lower basket for heavily soiled pots and pans, while the…
Faulty thermostat sensor (NTC).
A feature that detects the size of the load to adjust water and energy consumption accordingly.
It is time to run the “Machine Care” cleaning cycle.
It is time to run the “Machine Care” cleaning cycle.
It is time to run the "Machine Care" cleaning cycle.
Indicates a fault with the NTC (Negative Temperature Coefficient) thermistor, which is the temperature sensor.
A drying system that uses Zeolith minerals to absorb moisture and convert it into warm air for improved drying results,…
The pre-rinse cycle is active.
The pre-rinse cycle is active.
The pre-rinse cycle is active.
Signifies a shorter wash cycle for lightly soiled dishes.
Signifies a shorter wash cycle for lightly soiled dishes.
The dishwasher is currently operating.
The dishwasher is currently operating.
The dishwasher is currently operating.
The rinse aid dispenser needs to be refilled.
The rinse aid dispenser needs to be refilled.
The dishwasher salt reservoir needs to be refilled.
The dishwasher salt reservoir needs to be refilled.
The dishwasher salt reservoir needs to be refilled.
An option that uses more water during the rinse cycle and extends the drying phase to prevent watermarks and improve…
An option that uses more water during the rinse cycle and extends the drying phase to prevent watermarks and improve…
A program that reduces the noise level of the dishwasher by using a lower spray pressure and an extended cleaning…
A program that reduces the noise level of the dishwasher by using a lower spray pressure and an extended cleaning…
Reduces the wash time of a selected cycle.
An enhanced version of SpeedPerfect that further reduces the wash time.
This is not a display code but a program name indicating a quieter operation cycle.
A feature on fully integrated models that projects the remaining cycle time and status onto the floor.
Allows you to set a delay for the start of the wash cycle.
An option that can reduce the cleaning time of a cycle significantly while maintaining cleaning and drying performance.
An option that can reduce the cleaning time of a cycle significantly while maintaining cleaning and drying performance.
Indicates that the main wash portion of the cycle is currently active.
Indicates that the main wash portion of the cycle is currently active.
Problem with the water supply.
Problem with the water supply.
Problem with the water supply.