Bosch Dishwasher Error E6001

How to Fix E6001 Error (Step-by-Step) Turn off the power to the dishwasher at the circuit breaker and shut off the water supply valve, which is usually located under the kitchen sink.Open the dishwasher door and pull out the lower dish rack completely.Remove the lower spray arm by twisting its hub counter-clockwise and lifting it out.Unscrew the filter assembly at the bottom of the dishwasher tub and lift out all parts of the filter system to expose the sump area.Carefully reach into the sump opening and feel for the circulation pump impeller. Check for any hard objects like glass, bones, or plastic that may be jamming the impeller.If a blockage is found, carefully remove it with pliers or your fingers. Gently try to spin the impeller to ensure it moves freely.Reinstall the filter system, the lower spray arm, and the bottom rack. Restore power and water, then run a test cycle to see if the error is cleared.Turn the appliance off, wait about 2 minutes, then turn it back on.

What to Check Next on This Bosch Dishwasher Bosch Dishwasher Error E6001: Use the code or symbol as the starting clue, then confirm the actual symptom before ordering parts. Confirm whether the display is a normal cycle/status symbol or a recurring fault that stops operation. Check water supply, filter, sump, spray arms, drain path, and door latch before replacing electronic parts. If the same problem returns after basic checks, inspect the matching sensor, pump, heater, wiring, or control path based on the symptom. If the issue returns after these checks, match replacement parts to the complete Bosch model number from the appliance tag. The same code can point to different components depending on the exact model and when the failure appears. Parts Availability Note: For this Electrolux/Frigidaire error code, exact OEM part numbers can vary by model revision and serial range. We’ve listed the most likely component(s), but confirm compatibility using your full model number before ordering. If no exact SKU is shown, use this guide for diagnosis first, then verify the matching OEM part on RepairClinic or PartSelect. Recommended Parts to Check No exact official OEM part number is listed here because the correct Bosch dishwasher part can vary by complete model number. These are targeted part-category searches, not universal fit claims. Bosch dishwasher water inlet valve Common replacement category: Water inlet valve Fit note: Exact OEM part number varies by full Bosch dishwasher model number. Confirm compatibility before buying. Confidence: MediumThis category can be relevant for fill and water-supply faults after the tap, hose, and inlet screen are checked. Search Amazon for Bosch dishwasher water inlet valve Bosch dishwasher drain pump Common replacement category: Drain pump Fit note: Exact OEM part number varies by full Bosch dishwasher model number. Confirm compatibility before buying. Confidence: MediumThis category can be relevant for drain and standing-water symptoms after the filter, sump, and hose are checked. Search Amazon for Bosch dishwasher drain pump Bosch dishwasher circulation pump Common replacement category: Circulation pump / wash motor Fit note: Exact OEM part number varies by full Bosch dishwasher model number. Confirm compatibility before buying. Confidence: MediumThis category can be relevant for wash, spray-arm, and circulation symptoms after filters and spray arms are checked. Search Amazon for Bosch dishwasher circulation pump Before ordering: match the part to the complete Bosch dishwasher model number on the appliance tag.