Bosch Washer Error E67

How to Fix E67 Error (Step-by-Step) Disconnect the washer from the power outlet and water supply. Pull the washer away from the wall to access the rear panel.Remove the screws securing the top panel of the washer and slide the panel off to expose the internal components.Locate the main control module (PCB), which is typically housed in a plastic casing at the rear or side of the machine.Carefully disconnect all the wire harnesses connected to the old control module. Take a photo beforehand for reference.Remove the screws or release the clips holding the control module in place and gently lift it out of the washer.Install the new control module by securing it in the same position and reconnecting all the wire harnesses as they were on the old one.Reassemble the washer by replacing the top panel and securing it with the screws. Reconnect the power and water supply, then run a test cycle to ensure the error is cleared.Turn the appliance off, wait about 2 minutes, then turn it back on.

What to Check Next on This Bosch Washer Bosch Washer Error E67: Use the code or symbol as the starting clue, then confirm the actual symptom before ordering parts. Unplug the washer before touching wiring, the lock, the pump area, or the control panel. Check the door lock, drain filter, inlet supply, and visible harness connections before replacing controls. If the code returns during the same part of the cycle, match the repair path to that stage: fill, wash, drain, spin, lock, or control response. If the issue returns after these checks, match replacement parts to the complete Bosch model number from the appliance tag. The same code can point to different components depending on the exact model and when the failure appears. Parts Availability Note: For this Electrolux/Frigidaire error code, exact OEM part numbers can vary by model revision and serial range. We’ve listed the most likely component(s), but confirm compatibility using your full model number before ordering. If no exact SKU is shown, use this guide for diagnosis first, then verify the matching OEM part on RepairClinic or PartSelect. Recommended Parts to Check No exact official OEM part number is listed here because the correct Bosch washer part can vary by complete model number. These are targeted part-category searches, not universal fit claims. Bosch washer electronic control board Common replacement category: Main control board Fit note: Exact OEM part number varies by full Bosch washer model number. Confirm compatibility before buying. Confidence: MediumThis category can be relevant for control and communication faults after wiring and connector checks. Search Amazon for Bosch washer electronic control board Bosch washer user interface control panel Common replacement category: User interface / display board Fit note: Exact OEM part number varies by full Bosch washer model number. Confirm compatibility before buying. Confidence: MediumThis category can be relevant for display, button, selector, or cycle-control faults. Search Amazon for Bosch washer user interface control panel Bosch washer drain pump assembly Common replacement category: Drain pump Fit note: Exact OEM part number varies by full Bosch washer model number. Confirm compatibility before buying. Confidence: MediumThis category can be relevant for drain, no-spin, and water-removal symptoms after filter and hose checks. Search Amazon for Bosch washer drain pump assembly Before ordering: match the part to the complete Bosch washer model number on the appliance tag. Still Not Working? If the replacement part didn't fix the issue, you may have a wiring problem or main board failure.