Skip to main content
Appliance Fix Guide

Bosch Dryer error code

Bosch Dryer Error E01

Lint filter is blocked.

Lint filter is blocked.

Updated Aug 18, 2026
✅ WORTH FIXINGParts under $100
Bosch dryer repair guide for error E01
Error codeE01Dryer

Try these first

Start here before buying a part or taking the appliance apart.

  1. 1
    Check 1

    Remove the lint filter and clean it thoroughly.

  2. 2
    Check 2

    If the filter appears clean, wash it with warm, soapy water to remove any fabric softener residue.

  3. 3
    Check 3

    Inspect the area where the lint filter is inserted and remove any accumulated lint.

A quick explanation

What does E01 mean?

Lint filter is blocked.

The answer you came for

How to fix Bosch dryer error E01

Start with the safest checks and work from simple to technical.

  1. 1

    Step 1

    1. Unplug the dryer from the power source for safety.

  2. 2

    Step 2

    2. Open the dryer door and locate the lint filter. It is usually just inside the door opening.

  3. 3

    Step 3

    3. Pull the lint filter straight up and out of its housing.

  4. 4

    Step 4

    4. Remove the accumulated lint from the filter screen with your fingers. Do not use water to clean it as this can cause other issues.

  5. 5

    Step 5

    5. Use a soft brush or a vacuum cleaner with a crevice tool to clean the lint filter housing area.

  6. 6

    Step 6

    6. Re-insert the clean, dry lint filter back into its housing until it clicks into place.

  7. 7

    Step 7

    7. If the error persists after thorough cleaning, the lint filter itself may be damaged or clogged with fine particles and require replacement.

Read the additional checks from the current guide

How to Fix E01 Error (Step-by-Step) Unplug the dryer from the power source for safety and confirm the error stays cleared during a full test cycle.Open the dryer door and locate the lint filter. It is usually just inside the door opening.Pull the lint filter straight up and out of its housing.Remove the accumulated lint from the filter screen with your fingers. Do not use water to clean it as this can cause other issues.Use a soft brush or a vacuum cleaner with a crevice tool to clean the lint filter housing area.Re-insert the clean, dry lint filter back into its housing until it clicks into place.If the error persists after thorough cleaning, the lint filter itself may be damaged or clogged with fine particles and require replacement.Turn the appliance off, wait about 2 minutes, then turn it back on.

What to Check Next on This Bosch Dryer Bosch Dryer Error E01: Use the code or symbol as the starting clue, then confirm the actual symptom before ordering parts. Clean the lint screen and verify the vent path has strong airflow before replacing heat or control parts. Unplug the dryer before checking the heater, thermal fuse, moisture sensor, door switch, or control harness. If the symptom repeats after airflow checks, match the repair path to what fails: no start, no heat, long dry time, sensor dry behavior, or display/control response. If the issue returns after these checks, match replacement parts to the complete Bosch model number from the appliance tag. The same code can point to different components depending on the exact model and when the failure appears. [[PART_BOX:Lint Filter|$35-$60|https://www.amazon.com/s?k=Lint+Filter%5D%5D&tag=appliancefixg-20

If the code comes back

Do not keep replacing parts based only on the code. Repeat the safe checks above. If the fault remains, stop and arrange qualified service rather than ordering from the code alone.

What may be causing it?

  • Lint filter is blocked or clogged.
  • Fabric softener residue is obstructing the lint filter mesh.

These are possibilities to investigate, not proof that one part has failed.

Recommended part

Possible part if diagnosis confirms failure

Part listed in the current guide

OEM candidate: Lint Filter

Price noted in the current guide: $35-$60

Why this part is shown: It is associated with Bosch Dryer error E01 in the current guide. The error code alone does not prove this part has failed.

Compatibility varies by model. Confirm that the Amazon listing includes your complete dryer model number before ordering.

Amazon part link View recommended part on Amazon

You can open the recommendation now. Check model compatibility on the Amazon page before purchasing.

Affiliate disclosure: qualifying purchases may earn this site a commission at no additional cost to you.

Replacement options

Ready to replace your dryer?

If repairing this dryer no longer feels worthwhile, compare three replacement paths below.

Why shop your replacement on Amazon?

  • Fast, free delivery

    Prime members can get fast, free delivery on eligible items.

  • Convenient delivery options

    Select large appliances may offer scheduled or Room of Choice delivery.

  • Haul-away options

    Haul-away may be available for select appliances and delivery areas.

  • Installation help

    Installation or assembly may be available on select items.

Delivery and service options, fees, and availability vary by item, seller, and delivery ZIP code. Confirm available services at Amazon checkout.

Affiliate disclosure: qualifying purchases may earn this site a commission at no additional cost to you.

Make the money decision

Repair or replace calculator

Use the age and total repair estimate to get a simple comparison. This is guidance, not a guarantee.

Safety first

Disconnect power before opening panels or touching internal parts.

When to stop
  • Stop if you see burned wiring, melted connectors, water near electrical parts, or a gas smell.
  • Do not perform live-voltage testing unless you are trained and equipped for it.
  • Use the exact model manual or service information before replacing electronic controls.

Free quick sheet

Get the Bosch Dryer Error Code Quick Sheet

A concise reference with code meanings, severity, first checks, and when it is time to stop and call for service.

No spam. Unsubscribe anytime.