How to Fix Bosch Dryer Error E11

Written by

⚠️ Safety Warning: Appliance repair involves electricity, gas, and moving parts. Always disconnect power before working on any appliance.

Error Code: E11 Difficulty: Moderate

Problem: Overheating, often due to a clogged lint filter or poor ventilation.

⚖️ Repair Decision

✅ WORTH FIXING

Parts under $100

How to Fix E11 Error (Step-by-Step)

Unplug the dryer from the electrical outlet to ensure safety.
Locate the thermal fuse, which is typically on the blower housing or the heating element housing at the back of the dryer.
Disconnect the two wires attached to the thermal fuse and confirm the error stays cleared during a full test cycle.
Remove the screw that holds the thermal fuse in place and remove the old fuse.
Secure the new thermal fuse with the mounting screw and confirm the error stays cleared during a full test cycle.
Reconnect the two wires to the new thermal fuse and confirm the error stays cleared during a full test cycle.
Before reassembling, thoroughly clean the lint filter, the dryer vent, and the exhaust duct to prevent future overheating.
Turn the appliance off, wait about 2 minutes, then turn it back on.

OEM Part #: Thermal Fuse

Estimated Market Price: $10-$30

Still Not Working?
If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.

Appliance Type

Appliance Age

Estimated repair cost (parts, or parts + labor) Most DIY parts are $50–$250. If you have a quote, use the total.

Is it under warranty?

More options (for a better recommendation)

Brand

Your DIY Skill Level

Get the ‘Secret Service Mode’ Cheat Sheet for your Bosch model. Includes an easy-to-read list of every error code and quick diagnostic tips.