Bosch Dishwasher Error E6101

How to Fix E6101 Error (Step-by-Step) Disconnect the dishwasher from power by unplugging it or switching off the circuit breaker. Turn off the water supply, typically located under the sink.Place towels under and around the dishwasher to catch any residual water. You will likely need to pull the dishwasher out from under the counter to access the drain pump at the bottom.Carefully lay the dishwasher on its back to get clear access to the underside components. The drain pump is a small motor assembly connected to the sump and a drain hose.Disconnect the wire harness attached to the drain pump by pressing the release tab. Then, release the clamp holding the drain hose to the pump and slide the hose off.The pump is usually held in place by a twist-lock mechanism or a few screws. Twist the pump counter-clockwise or remove the screws to release it from the dishwasher sump. Have a towel ready for any water that spills out.Install the new drain pump by aligning it and twisting it clockwise into place or securing it with the screws. Reconnect the drain hose and its clamp, and plug the electrical connector back in securely.Turn the appliance off, wait about 2 minutes, then turn it back on.

What to Check Next on This Bosch Dishwasher Bosch Dishwasher Error E6101: Use the code or symbol as the starting clue, then confirm the actual symptom before ordering parts. Confirm whether the display is a normal cycle/status symbol or a recurring fault that stops operation. Check water supply, filter, sump, spray arms, drain path, and door latch before replacing electronic parts. If the same problem returns after basic checks, inspect the matching sensor, pump, heater, wiring, or control path based on the symptom. If the issue returns after these checks, match replacement parts to the complete Bosch model number from the appliance tag. The same code can point to different components depending on the exact model and when the failure appears. Parts Availability Note: For this Electrolux/Frigidaire error code, exact OEM part numbers can vary by model revision and serial range. We’ve listed the most likely component(s), but confirm compatibility using your full model number before ordering. If no exact SKU is shown, use this guide for diagnosis first, then verify the matching OEM part on RepairClinic or PartSelect. Recommended Parts to Check No exact official OEM part number is listed here because the correct Bosch dishwasher part can vary by complete model number. These are targeted part-category searches, not universal fit claims. Bosch dishwasher water inlet valve Common replacement category: Water inlet valve Fit note: Exact OEM part number varies by full Bosch dishwasher model number. Confirm compatibility before buying. Confidence: MediumThis category can be relevant for fill and water-supply faults after the tap, hose, and inlet screen are checked. Search Amazon for Bosch dishwasher water inlet valve Bosch dishwasher drain pump Common replacement category: Drain pump Fit note: Exact OEM part number varies by full Bosch dishwasher model number. Confirm compatibility before buying. Confidence: MediumThis category can be relevant for drain and standing-water symptoms after the filter, sump, and hose are checked. Search Amazon for Bosch dishwasher drain pump Bosch dishwasher circulation pump Common replacement category: Circulation pump / wash motor Fit note: Exact OEM part number varies by full Bosch dishwasher model number. Confirm compatibility before buying. Confidence: MediumThis category can be relevant for wash, spray-arm, and circulation symptoms after filters and spray arms are checked. Search Amazon for Bosch dishwasher circulation pump Before ordering: match the part to the complete Bosch dishwasher model number on the appliance tag.