⚠️ Safety Warning: Appliance repair involves electricity, gas, and moving parts. Always disconnect power before working on any appliance.
Error Code: F08 Difficulty: Hard
Problem: Evaporator fan failure.
How to Fix F08 Error (Step-by-Step)
- Unplug the refrigerator from the wall outlet to ensure your safety.
- Empty the freezer compartment completely, removing all food, shelves, and the ice maker if one is present.
- Locate and remove the screws holding the interior rear panel of the freezer. Carefully detach the panel to expose the evaporator coil and fan.
- Disconnect the wire harness attached to the old evaporator fan motor. Remove the screws that mount the fan motor to its bracket.
- Mount the new fan motor onto the bracket and secure it with the screws. Reconnect the wire harness to the new motor.
- Reinstall the rear panel, ensuring it is securely in place. Reinstall the freezer shelves and the ice maker.
- Turn the appliance off, wait about 2 minutes, then turn it back on.
Parts Availability Note: For this Electrolux/Frigidaire error code, exact OEM part numbers can vary by model revision and serial range. We’ve listed the most likely component(s), but confirm compatibility using your full model number before ordering. If no exact SKU is shown, use this guide for diagnosis first, then verify the matching OEM part on RepairClinic or PartSelect.
Still Not Working?
If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.
Most DIY parts are $50–$250. If you have a quote, use the total.
More options (for a better recommendation)
⚡ Don’t Risk a DIY Fail!
Get the ‘Secret Service Mode’ Cheat Sheet for your Bosch model. Includes an easy-to-read list of every error code and quick diagnostic tips.
✅ Join 15,000+ DIYers • Instant PDF Download
Browse More Codes
📖 View All Error Codes
Expert: Mike Sullivan
EPA Section 608 Certified Technician with 18+ years experience.
Read Editorial Standards →Browse all Bosch error codes: Bosch Error Codes
Leave a Reply