Category: Electrolux

How to Fix Electrolux Washer Error E42
Error Code: E42 Difficulty: Hard

Problem: Malfunction of the door lock.

How to Fix E42 Error (Step-by-Step)
1. Begin by unplugging the washing machine from the power outlet for safety.
2. Open the front door of the washer to access the door lock area.
3. Use a spring clamp tool or pliers to expand and remove the outer wire clamp holding the door boot seal in place.
4. Carefully fold the door boot seal back and away from the front panel to expose the door lock mechanism.
5. Remove the screws that fasten the door lock assembly to the washer’s frame.
6. Detach the wire harness connected to the assembly, taking care not to damage the connector.
7. Position the new door lock assembly, reconnect the wire harness, and secure it with the mounting screws. Finally, reinstall the door boot seal and its clamp.
8. Turn the appliance off, wait about 2 minutes, then turn it back on.
Verified Compatible Alternatives:
- A03648203
- 5304505231
- 5304514774
Still Not Working?
If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.

Browse all Electrolux error codes: Electrolux Error Codes
When It’s Better to Replace Than Repair

Sometimes replacing an appliance makes more financial sense than putting more money into repairs.
Here are a few signs it may be time to shop for a new one:
- ✓Appliance over 8-10 years old
- ✓Repair cost over 50% of replacement
- ✓Multiple recent breakdowns
- ✓Major component failure
Recommended Replacement Options
Budget Option

Top Rated Washers Under $600

Amazon’s Highest-Rated Value Models

Free ‘Room of Choice’ Delivery Available

Professional Haul-away Options at Checkout

View Top Rated Models & Delivery Options

Mid-Range Option

Top Rated Washers $600 to $1,000

Best-Sellers with Thousands of 5-Star Reviews

Expert Installation & Hookup Services available

Protection Plans for Long-Term Peace of Mind

View Top Rated Models & Delivery Options

Premium Option

Top Rated Washers Over $1,000

Top-of-the-Line Performance & Technology

White-Glove Delivery and Haul-away eligible

Comprehensive Warranty & Support Options

View Top Rated Models & Delivery Options
Why Upgrade via Amazon?

Fast, Scheduled Delivery – You pick the date and time

Expert Installation – Professional setup available for most models

Old Appliance Haul-away – They’ll take your broken unit when they leave

Easy Returns – Buy with confidence from a leader in customer service
As an Amazon Associate, we earn from qualifying purchases.
May 2, 2026
How to Fix Electrolux Washer Error E41
Error Code: E41 Difficulty: Hard

Problem: The door is not closed tightly.

How to Fix E41 Error (Step-by-Step)
1. Ensure the washer is completely powered down by unplugging it.
2. Open the washer door and inspect the door strike (the plastic or metal piece on the door that engages the lock) for damage or misalignment. Also, check that the door hinge is not loose.
3. If the strike and hinge are okay, the issue is likely the lock assembly. Remove the outer spring band from the rubber door boot seal.
4. Peel back the door boot seal around the lock area to gain access to the lock assembly’s mounting screws.
5. Unscrew the door lock assembly from the front panel and confirm the error stays cleared during a full test cycle.
6. Disconnect the electrical connector from the old lock assembly and attach it to the new one.
7. Reinstall the new lock assembly, put the door boot seal back in place, and secure it with the spring band before restoring power.
8. Turn the appliance off, wait about 2 minutes, then turn it back on.
Verified Compatible Alternatives:
- A03648203
- 5304505231
- 5304514774
Still Not Working?
If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.

Browse all Electrolux error codes: Electrolux Error Codes
When It’s Better to Replace Than Repair

Sometimes replacing an appliance makes more financial sense than putting more money into repairs.
Here are a few signs it may be time to shop for a new one:
- ✓Appliance over 8-10 years old
- ✓Repair cost over 50% of replacement
- ✓Multiple recent breakdowns
- ✓Major component failure
Recommended Replacement Options
Budget Option

Top Rated Washers Under $600

Amazon’s Highest-Rated Value Models

Free ‘Room of Choice’ Delivery Available

Professional Haul-away Options at Checkout

View Top Rated Models & Delivery Options

Mid-Range Option

Top Rated Washers $600 to $1,000

Best-Sellers with Thousands of 5-Star Reviews

Expert Installation & Hookup Services available

Protection Plans for Long-Term Peace of Mind

View Top Rated Models & Delivery Options

Premium Option

Top Rated Washers Over $1,000

Top-of-the-Line Performance & Technology

White-Glove Delivery and Haul-away eligible

Comprehensive Warranty & Support Options

View Top Rated Models & Delivery Options
Why Upgrade via Amazon?

Fast, Scheduled Delivery – You pick the date and time

Expert Installation – Professional setup available for most models

Old Appliance Haul-away – They’ll take your broken unit when they leave

Easy Returns – Buy with confidence from a leader in customer service
As an Amazon Associate, we earn from qualifying purchases.
May 2, 2026
How to Fix Electrolux Washer Error E40
Error Code: E40 Difficulty: Hard

Problem: Door Lock Error (Variant) – Similar to E30, often related to the door switch or latch.

How to Fix E40 Error (Step-by-Step)
1. Disconnect the washer from its power source by unplugging it from the wall outlet.
2. Locate the metal spring clamp that secures the large rubber door boot seal to the front panel of the washer. Carefully pry this clamp off using a flathead screwdriver or pliers.
3. Gently peel the door boot seal away from the front panel in the area of the door lock assembly.
4. You will now see the door lock assembly. Remove the screws holding it in place.
5. Carefully pull the assembly out, press the release tab on the wire harness connector, and detach the wiring.
6. Connect the wire harness to the new door lock assembly, mount it in place with the screws, and re-secure the door boot seal with the spring clamp.
7. Turn the appliance off, wait about 2 minutes, then turn it back on.
Verified Compatible Alternatives:
- A03648203
- 5304505231
- 5304514774
Still Not Working?
If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.

Browse all Electrolux error codes: Electrolux Error Codes
When It’s Better to Replace Than Repair

Sometimes replacing an appliance makes more financial sense than putting more money into repairs.
Here are a few signs it may be time to shop for a new one:
- ✓Appliance over 8-10 years old
- ✓Repair cost over 50% of replacement
- ✓Multiple recent breakdowns
- ✓Major component failure
Recommended Replacement Options
Budget Option

Top Rated Washers Under $600

Amazon’s Highest-Rated Value Models

Free ‘Room of Choice’ Delivery Available

Professional Haul-away Options at Checkout

View Top Rated Models & Delivery Options

Mid-Range Option

Top Rated Washers $600 to $1,000

Best-Sellers with Thousands of 5-Star Reviews

Expert Installation & Hookup Services available

Protection Plans for Long-Term Peace of Mind

View Top Rated Models & Delivery Options

Premium Option

Top Rated Washers Over $1,000

Top-of-the-Line Performance & Technology

White-Glove Delivery and Haul-away eligible

Comprehensive Warranty & Support Options

View Top Rated Models & Delivery Options
Why Upgrade via Amazon?

Fast, Scheduled Delivery – You pick the date and time

Expert Installation – Professional setup available for most models

Old Appliance Haul-away – They’ll take your broken unit when they leave

Easy Returns – Buy with confidence from a leader in customer service
As an Amazon Associate, we earn from qualifying purchases.
May 2, 2026
How to Fix Electrolux Washer Error E39
Error Code: E39 Difficulty: Hard

Problem: Malfunction of the water overflow level sensor.

How to Fix E39 Error (Step-by-Step)
1. Unplug the washing machine from the wall outlet to prevent any electrical shock.
2. Turn off the water supply valves connected to the washer.
3. Access the pressure sensor by removing the top panel of the washer, which is typically held in place by screws on the back or sides.
4. Locate the water level pressure sensor. It’s a small, round part with a thin rubber tube and a wire harness connected to it, usually mounted near the top of the machine’s cabinet.
5. Carefully inspect the thin rubber tube connected to the sensor for any signs of kinks, clogs, or damage. Disconnect the tube from the sensor and gently blow through it to clear any potential blockage in the air trap at the other end.
6. Examine the wiring and the plastic connector attached to the sensor. Ensure the connection is tight and that there are no signs of corrosion or damage to the wires.
7. Reattach the top panel, restore power and water to the machine, and start a new cycle to check if the error is cleared.
8. Turn the appliance off, wait about 2 minutes, then turn it back on.
Parts Availability Note: For this Electrolux/Frigidaire error code, exact OEM part numbers can vary by model revision and serial range. We’ve listed the most likely component(s), but confirm compatibility using your full model number before ordering. If no exact SKU is shown, use this guide for diagnosis first, then verify the matching OEM part on RepairClinic or PartSelect.

Still Not Working?
If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.

Browse all Electrolux error codes: Electrolux Error Codes
When It’s Better to Replace Than Repair

Sometimes replacing an appliance makes more financial sense than putting more money into repairs.
Here are a few signs it may be time to shop for a new one:
- ✓Appliance over 8-10 years old
- ✓Repair cost over 50% of replacement
- ✓Multiple recent breakdowns
- ✓Major component failure
Recommended Replacement Options
Budget Option

Top Rated Washers Under $600

Amazon’s Highest-Rated Value Models

Free ‘Room of Choice’ Delivery Available

Professional Haul-away Options at Checkout

View Top Rated Models & Delivery Options

Mid-Range Option

Top Rated Washers $600 to $1,000

Best-Sellers with Thousands of 5-Star Reviews

Expert Installation & Hookup Services available

Protection Plans for Long-Term Peace of Mind

View Top Rated Models & Delivery Options

Premium Option

Top Rated Washers Over $1,000

Top-of-the-Line Performance & Technology

White-Glove Delivery and Haul-away eligible

Comprehensive Warranty & Support Options

View Top Rated Models & Delivery Options
Why Upgrade via Amazon?

Fast, Scheduled Delivery – You pick the date and time

Expert Installation – Professional setup available for most models

Old Appliance Haul-away – They’ll take your broken unit when they leave

Easy Returns – Buy with confidence from a leader in customer service
As an Amazon Associate, we earn from qualifying purchases.
May 2, 2026
How to Fix Electrolux Washer Error E38
Error Code: E38 Difficulty: Easy

Problem: Blocked pressure chamber or pressure-sensing hydraulic circuit.

How to Fix E38 Error (Step-by-Step)
1. Unplug the washer from the wall outlet and confirm the error stays cleared during a full test cycle.
2. Pull the washer away from the wall to access the panels. You will likely need to remove the top panel.
3. Locate the pressure switch. It will have a thin rubber or plastic tube attached to it.
4. Follow this tube down to where it connects to the side of the outer drum or tub. This connection point is the pressure chamber.
5. Carefully disconnect the tube from the pressure chamber. Be prepared for a small amount of water to spill out.
6. Blow forcefully through the tube to clear any trapped lint, soap scum, or debris. You can also use a small, flexible wire to gently clear the port on the tub itself.
7. Reconnect the tube securely, reattach the washer’s panel, plug the machine in, and run a rinse and spin cycle to test.
8. Turn the appliance off, wait about 2 minutes, then turn it back on.
Still Not Working?
If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.

Browse all Electrolux error codes: Electrolux Error Codes
When It’s Better to Replace Than Repair

Sometimes replacing an appliance makes more financial sense than putting more money into repairs.
Here are a few signs it may be time to shop for a new one:
- ✓Appliance over 8-10 years old
- ✓Repair cost over 50% of replacement
- ✓Multiple recent breakdowns
- ✓Major component failure
Recommended Replacement Options
Budget Option

Top Rated Washers Under $600

Amazon’s Highest-Rated Value Models

Free ‘Room of Choice’ Delivery Available

Professional Haul-away Options at Checkout

View Top Rated Models & Delivery Options

Mid-Range Option

Top Rated Washers $600 to $1,000

Best-Sellers with Thousands of 5-Star Reviews

Expert Installation & Hookup Services available

Protection Plans for Long-Term Peace of Mind

View Top Rated Models & Delivery Options

Premium Option

Top Rated Washers Over $1,000

Top-of-the-Line Performance & Technology

White-Glove Delivery and Haul-away eligible

Comprehensive Warranty & Support Options

View Top Rated Models & Delivery Options
Why Upgrade via Amazon?

Fast, Scheduled Delivery – You pick the date and time

Expert Installation – Professional setup available for most models

Old Appliance Haul-away – They’ll take your broken unit when they leave

Easy Returns – Buy with confidence from a leader in customer service
As an Amazon Associate, we earn from qualifying purchases.
May 2, 2026
How to Fix Electrolux Washer Error E37
Error Code: E37 Difficulty: Hard

Problem: Malfunction of the first water level sensor (I).

How to Fix E37 Error (Step-by-Step)
1. Disconnect the washer from the power outlet to prevent any electrical shock.
2. Turn off the water supply valves connected to the washer.
3. Access the pressure sensor by removing the top panel of the washing machine, which is usually secured by screws on the back.
4. Locate the water level sensor. It’s a small, round component with a thin rubber tube and an electrical connector attached.
5. Carefully unplug the electrical connector from the sensor. Check for any signs of corrosion or damage on the pins and the connector itself, then reconnect it securely.
6. Detach the thin rubber tube from the sensor. Gently blow through the tube to clear any potential blockages like lint or detergent residue that could be causing a false reading.
7. Reassemble the washer by reattaching the tube and the top panel. Plug the washer back in, turn on the water, and run a short cycle to see if the error is cleared.
8. Turn the appliance off, wait about 2 minutes, then turn it back on.
Parts Availability Note: For this Electrolux/Frigidaire error code, exact OEM part numbers can vary by model revision and serial range. We’ve listed the most likely component(s), but confirm compatibility using your full model number before ordering. If no exact SKU is shown, use this guide for diagnosis first, then verify the matching OEM part on RepairClinic or PartSelect.

Still Not Working?
If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.

Browse all Electrolux error codes: Electrolux Error Codes
When It’s Better to Replace Than Repair

Sometimes replacing an appliance makes more financial sense than putting more money into repairs.
Here are a few signs it may be time to shop for a new one:
- ✓Appliance over 8-10 years old
- ✓Repair cost over 50% of replacement
- ✓Multiple recent breakdowns
- ✓Major component failure
Recommended Replacement Options
Budget Option

Top Rated Washers Under $600

Amazon’s Highest-Rated Value Models

Free ‘Room of Choice’ Delivery Available

Professional Haul-away Options at Checkout

View Top Rated Models & Delivery Options

Mid-Range Option

Top Rated Washers $600 to $1,000

Best-Sellers with Thousands of 5-Star Reviews

Expert Installation & Hookup Services available

Protection Plans for Long-Term Peace of Mind

View Top Rated Models & Delivery Options

Premium Option

Top Rated Washers Over $1,000

Top-of-the-Line Performance & Technology

White-Glove Delivery and Haul-away eligible

Comprehensive Warranty & Support Options

View Top Rated Models & Delivery Options
Why Upgrade via Amazon?

Fast, Scheduled Delivery – You pick the date and time

Expert Installation – Professional setup available for most models

Old Appliance Haul-away – They’ll take your broken unit when they leave

Easy Returns – Buy with confidence from a leader in customer service
As an Amazon Associate, we earn from qualifying purchases.
May 2, 2026
How to Fix Electrolux Washer Error E36
Error Code: E36 Difficulty: Hard

Problem: Breakdown of the sensor that prevents the heating element from turning on without the required water level.

How to Fix E36 Error (Step-by-Step)
1. Unplug the washing machine from the wall outlet to completely disconnect the power.
2. To access the internal components, remove the top panel of the washer by unscrewing the retaining screws located on the back of the machine.
3. Locate the water level sensor, which is typically a round part near the top of the machine with a wiring harness and a small rubber hose connected to it.
4. Carefully inspect the wiring and the plastic connector plug at the sensor. Ensure the plug is seated firmly and that there are no broken, burnt, or corroded wires.
5. Disconnect the thin rubber hose from the sensor and check it for any cracks, kinks, or blockages. You can blow gently through the hose towards the drum to confirm the air path is clear.
6. Since this error points to a breakdown in the sensor’s circuitry, the issue often lies with the sensor itself or the main control board’s ability to read the sensor. This requires specialized check tools.
7. Due to the risk of electrical shock and the complexity of testing the heater safety circuit, it is strongly recommended to have a qualified service diagnose and resolve the issue.
8. Turn the appliance off, wait about 2 minutes, then turn it back on.
Parts Availability Note: For this Electrolux/Frigidaire error code, exact OEM part numbers can vary by model revision and serial range. We’ve listed the most likely component(s), but confirm compatibility using your full model number before ordering. If no exact SKU is shown, use this guide for diagnosis first, then verify the matching OEM part on RepairClinic or PartSelect.

Still Not Working?
If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.

Browse all Electrolux error codes: Electrolux Error Codes
When It’s Better to Replace Than Repair

Sometimes replacing an appliance makes more financial sense than putting more money into repairs.
Here are a few signs it may be time to shop for a new one:
- ✓Appliance over 8-10 years old
- ✓Repair cost over 50% of replacement
- ✓Multiple recent breakdowns
- ✓Major component failure
Recommended Replacement Options
Budget Option

Top Rated Washers Under $600

Amazon’s Highest-Rated Value Models

Free ‘Room of Choice’ Delivery Available

Professional Haul-away Options at Checkout

View Top Rated Models & Delivery Options

Mid-Range Option

Top Rated Washers $600 to $1,000

Best-Sellers with Thousands of 5-Star Reviews

Expert Installation & Hookup Services available

Protection Plans for Long-Term Peace of Mind

View Top Rated Models & Delivery Options

Premium Option

Top Rated Washers Over $1,000

Top-of-the-Line Performance & Technology

White-Glove Delivery and Haul-away eligible

Comprehensive Warranty & Support Options

View Top Rated Models & Delivery Options
Why Upgrade via Amazon?

Fast, Scheduled Delivery – You pick the date and time

Expert Installation – Professional setup available for most models

Old Appliance Haul-away – They’ll take your broken unit when they leave

Easy Returns – Buy with confidence from a leader in customer service
As an Amazon Associate, we earn from qualifying purchases.
May 2, 2026
How to Fix Electrolux Washer Error E35
Error Code: E35 Difficulty: Hard

Problem: The water level is too high.

How to Fix E35 Error (Step-by-Step)
1. First, unplug the washing machine to prevent any electrical accidents.
2. Locate the water inlet valve at the back of the machine where the water hoses connect. Inspect it to see if it’s stuck open, which can cause overfilling.
3. Disconnect the water hoses and check the small filter screens inside the valve connections for debris; clean them if necessary.
4. Access the pressure switch by removing the top panel. Check the air hose connected to it for blockages or damage.
5. If the valve and hose seem okay, the pressure switch is the next part to check. It may not be correctly sensing the water level.
6. Replace the pressure switch by disconnecting its wires and hose, removing the old part, and installing the new one.
7. If the problem persists after replacing the pressure switch, the water inlet valve is likely faulty and needs to be replaced.
8. Turn the appliance off, wait about 2 minutes, then turn it back on.
Verified Compatible Alternatives:
- 134762000
- 134762010
Still Not Working?
If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.

Browse all Electrolux error codes: Electrolux Error Codes
When It’s Better to Replace Than Repair

Sometimes replacing an appliance makes more financial sense than putting more money into repairs.
Here are a few signs it may be time to shop for a new one:
- ✓Appliance over 8-10 years old
- ✓Repair cost over 50% of replacement
- ✓Multiple recent breakdowns
- ✓Major component failure
Recommended Replacement Options
Budget Option

Top Rated Washers Under $600

Amazon’s Highest-Rated Value Models

Free ‘Room of Choice’ Delivery Available

Professional Haul-away Options at Checkout

View Top Rated Models & Delivery Options

Mid-Range Option

Top Rated Washers $600 to $1,000

Best-Sellers with Thousands of 5-Star Reviews

Expert Installation & Hookup Services available

Protection Plans for Long-Term Peace of Mind

View Top Rated Models & Delivery Options

Premium Option

Top Rated Washers Over $1,000

Top-of-the-Line Performance & Technology

White-Glove Delivery and Haul-away eligible

Comprehensive Warranty & Support Options

View Top Rated Models & Delivery Options
Why Upgrade via Amazon?

Fast, Scheduled Delivery – You pick the date and time

Expert Installation – Professional setup available for most models

Old Appliance Haul-away – They’ll take your broken unit when they leave

Easy Returns – Buy with confidence from a leader in customer service
As an Amazon Associate, we earn from qualifying purchases.
May 2, 2026
How to Fix Electrolux Washer Error E34
Error Code: E34 Difficulty: Hard

Problem: Incongruency between the electronic pressure switch and the anti-boiling pressure switch level for over 60 seconds.

How to Fix E34 Error (Step-by-Step)
1. Power down the washer completely by unplugging it from the wall socket.
2. Remove the necessary exterior panels to access the electronic pressure switch and the anti-boiling pressure switch.
3. Visually inspect the wiring and connectors for both switches. Ensure they are firmly attached and show no signs of damage or burning.
4. Check the air tubes connected to both switches for any obstructions, splits, or loose fittings. Clear any blockages you find.
5. Using a multimeter, you can test the continuity of each switch, but this is an advanced step. A simpler approach is to replace the primary electronic pressure switch first, as it’s a common failure point.
6. If replacing the first switch doesn’t solve the error, the anti-boiling switch may be the cause.
7. After replacing the part(s), carefully reassemble the washer and run a test cycle.
8. Turn the appliance off, wait about 2 minutes, then turn it back on.
Verified Compatible Alternatives:
- 134762010
- 5304511335
Still Not Working?
If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.

Browse all Electrolux error codes: Electrolux Error Codes
When It’s Better to Replace Than Repair

Sometimes replacing an appliance makes more financial sense than putting more money into repairs.
Here are a few signs it may be time to shop for a new one:
- ✓Appliance over 8-10 years old
- ✓Repair cost over 50% of replacement
- ✓Multiple recent breakdowns
- ✓Major component failure
Recommended Replacement Options
Budget Option

Top Rated Washers Under $600

Amazon’s Highest-Rated Value Models

Free ‘Room of Choice’ Delivery Available

Professional Haul-away Options at Checkout

View Top Rated Models & Delivery Options

Mid-Range Option

Top Rated Washers $600 to $1,000

Best-Sellers with Thousands of 5-Star Reviews

Expert Installation & Hookup Services available

Protection Plans for Long-Term Peace of Mind

View Top Rated Models & Delivery Options

Premium Option

Top Rated Washers Over $1,000

Top-of-the-Line Performance & Technology

White-Glove Delivery and Haul-away eligible

Comprehensive Warranty & Support Options

View Top Rated Models & Delivery Options
Why Upgrade via Amazon?

Fast, Scheduled Delivery – You pick the date and time

Expert Installation – Professional setup available for most models

Old Appliance Haul-away – They’ll take your broken unit when they leave

Easy Returns – Buy with confidence from a leader in customer service
As an Amazon Associate, we earn from qualifying purchases.
May 2, 2026
How to Fix Electrolux Washer Error E33
Error Code: E33 Difficulty: Hard

Problem: Inconsistent operation of water level sensors.

How to Fix E33 Error (Step-by-Step)
1. Turn off the circuit breaker for the washer and shut off the water faucets.
2. Open the top panel of the washer to get to the water level sensors (pressure switches).
3. Inspect the wiring going to both sensors. Look for any loose plugs, frayed wires, or signs of corrosion on the terminals.
4. Disconnect each wiring harness, clean the contacts with a small brush or contact cleaner if they look dirty, and plug them back in securely.
5. Examine the air hoses attached to the sensors. Make sure they are not pinched, cracked, or clogged with residue.
6. If wiring and hoses are in good condition, one of the sensors is likely defective and must be replaced.
7. Replace the suspect sensor, reassemble the machine, and test its operation.
8. Turn the appliance off, wait about 2 minutes, then turn it back on.
Verified Compatible Alternatives:
- 134762010
Still Not Working?
If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.

Browse all Electrolux error codes: Electrolux Error Codes
When It’s Better to Replace Than Repair

Sometimes replacing an appliance makes more financial sense than putting more money into repairs.
Here are a few signs it may be time to shop for a new one:
- ✓Appliance over 8-10 years old
- ✓Repair cost over 50% of replacement
- ✓Multiple recent breakdowns
- ✓Major component failure
Recommended Replacement Options
Budget Option

Top Rated Washers Under $600

Amazon’s Highest-Rated Value Models

Free ‘Room of Choice’ Delivery Available

Professional Haul-away Options at Checkout

View Top Rated Models & Delivery Options

Mid-Range Option

Top Rated Washers $600 to $1,000

Best-Sellers with Thousands of 5-Star Reviews

Expert Installation & Hookup Services available

Protection Plans for Long-Term Peace of Mind

View Top Rated Models & Delivery Options

Premium Option

Top Rated Washers Over $1,000

Top-of-the-Line Performance & Technology

White-Glove Delivery and Haul-away eligible

Comprehensive Warranty & Support Options

View Top Rated Models & Delivery Options
Why Upgrade via Amazon?

Fast, Scheduled Delivery – You pick the date and time

Expert Installation – Professional setup available for most models

Old Appliance Haul-away – They’ll take your broken unit when they leave

Easy Returns – Buy with confidence from a leader in customer service
As an Amazon Associate, we earn from qualifying purchases.
May 2, 2026