Category: Electrolux

  • How to Fix Electrolux Washer Error E60

    How to Fix Electrolux Washer Error E60

    Error Code: E60 Difficulty: Hard

    Problem: Heating Error – Washer not heating water or taking too long to heat.

    How to Fix E60 Error (Step-by-Step)

    1. Unplug the washer and turn off the water supply and confirm the error stays cleared during a full test cycle.
    2. Drain any water from the tub. You may need to use the drain pump filter or a siphon.
    3. Locate the heating element at the bottom of the outer tub. It is often accessible from the front or back of the machine by removing a lower panel.
    4. Disconnect the wires from the heating element. Use a multimeter set to continuity or resistance (ohms) to test the element. A reading of infinity indicates the element is broken and needs replacement.
    5. Locate the water temperature sensor, known as a thermistor, which is usually mounted near the heating element. Test its resistance with a multimeter; if it shows an open or shorted circuit, it must be replaced.
    6. If both the element and thermistor test correctly, inspect the wiring between these components and the main control board for any breaks or damage.
    7. If all other components are functional, the relay that controls the heating circuit on the main control board has failed, and the entire board will need to be replaced.
    8. Turn the appliance off, wait about 2 minutes, then turn it back on.
    Verified Compatible Alternatives:

    • 137488301
    • 137488302
    • 1242941118

    Still Not Working?
    If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.

    Browse all Electrolux error codes: Electrolux Error Codes

    When It’s Better to Replace Than Repair

    Sometimes replacing an appliance makes more financial sense than putting more money into repairs.
    Here are a few signs it may be time to shop for a new one:

    • ✓Appliance over 8-10 years old
    • ✓Repair cost over 50% of replacement
    • ✓Multiple recent breakdowns
    • ✓Major component failure

    Recommended Replacement Options

    Budget Option

    Top Rated Washers Under $600

    • Amazon’s Highest-Rated Value Models
    • Free ‘Room of Choice’ Delivery Available
    • Professional Haul-away Options at Checkout


    View Top Rated Models & Delivery Options

    Mid-Range Option

    Top Rated Washers $600 to $1,000

    • Best-Sellers with Thousands of 5-Star Reviews
    • Expert Installation & Hookup Services available
    • Protection Plans for Long-Term Peace of Mind


    View Top Rated Models & Delivery Options

    Premium Option

    Top Rated Washers Over $1,000

    • Top-of-the-Line Performance & Technology
    • White-Glove Delivery and Haul-away eligible
    • Comprehensive Warranty & Support Options


    View Top Rated Models & Delivery Options

    Why Upgrade via Amazon?

    • Fast, Scheduled Delivery – You pick the date and time
    • Expert Installation – Professional setup available for most models
    • Old Appliance Haul-away – They’ll take your broken unit when they leave
    • Easy Returns – Buy with confidence from a leader in customer service

    As an Amazon Associate, we earn from qualifying purchases.

  • How to Fix Electrolux Washer Error E5F

    How to Fix Electrolux Washer Error E5F

    Error Code: E5F Difficulty: Hard

    Problem: Motor control is continuously resetting.

    How to Fix E5F Error (Step-by-Step)

    1. Disconnect the washer from the power outlet to ensure safety during the repair.
    2. Gain access to the motor control board, which is typically located low in the machine, near the drive motor.
    3. Check all wire connections plugged into the motor control board. Unplug and re-plug each connector to make sure they are secure.
    4. Inspect the wiring between the main control board and the motor control board for any signs of damage or loose connections.
    5. A continuously resetting motor control board is often caused by an internal failure on the board itself or due to erratic power being supplied from the main control board.
    6. The most common fix for this issue is to replace the motor control board.
    7. Carefully disconnect the wiring from the old board and install the new one, making sure every connection is in the correct place.
    8. Reassemble the washer’s panels, restore power, and check if the error is cleared.
    Verified Compatible Alternatives:

    • 5304519503
    • 5304529897

    Still Not Working?
    If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.

    Browse all Electrolux error codes: Electrolux Error Codes

    When It’s Better to Replace Than Repair

    Sometimes replacing an appliance makes more financial sense than putting more money into repairs.
    Here are a few signs it may be time to shop for a new one:

    • ✓Appliance over 8-10 years old
    • ✓Repair cost over 50% of replacement
    • ✓Multiple recent breakdowns
    • ✓Major component failure

    Recommended Replacement Options

    Budget Option

    Top Rated Washers Under $600

    • Amazon’s Highest-Rated Value Models
    • Free ‘Room of Choice’ Delivery Available
    • Professional Haul-away Options at Checkout


    View Top Rated Models & Delivery Options

    Mid-Range Option

    Top Rated Washers $600 to $1,000

    • Best-Sellers with Thousands of 5-Star Reviews
    • Expert Installation & Hookup Services available
    • Protection Plans for Long-Term Peace of Mind


    View Top Rated Models & Delivery Options

    Premium Option

    Top Rated Washers Over $1,000

    • Top-of-the-Line Performance & Technology
    • White-Glove Delivery and Haul-away eligible
    • Comprehensive Warranty & Support Options


    View Top Rated Models & Delivery Options

    Why Upgrade via Amazon?

    • Fast, Scheduled Delivery – You pick the date and time
    • Expert Installation – Professional setup available for most models
    • Old Appliance Haul-away – They’ll take your broken unit when they leave
    • Easy Returns – Buy with confidence from a leader in customer service

    As an Amazon Associate, we earn from qualifying purchases.

  • How to Fix Electrolux Washer Error E5D

    How to Fix Electrolux Washer Error E5D

    Error Code: E5D Difficulty: Hard

    Problem: Communication problem between the main control board and the motor control board.

    How to Fix E5D Error (Step-by-Step)

    1. Turn off the circuit breaker for the washer and unplug the unit.
    2. Remove the top and rear panels of the washer to gain access to the main control board (usually near the top) and the motor control board (usually near the motor at the bottom).
    3. Locate the communication cable, which is a wire harness that runs between these two boards.
    4. Disconnect the harness from both boards and inspect the connector pins for any corrosion or damage. Re-seat the connectors firmly to ensure a good connection.
    5. Carefully inspect the entire length of the wire harness for any signs of damage, such as pinching, cuts, or breaks that could interrupt the signal.
    6. If re-seating the connectors and inspecting the harness does not solve the problem, one of the control boards has a failed communication circuit.
    7. A service would typically diagnose which board is at fault, but it often requires replacing one and testing. The main control board is a common starting point.
    8. After replacing the faulty board, reassemble the washer and run a cycle to confirm the communication error is resolved.
    Verified Compatible Alternatives:

    • 5304519503
    • 5304529897

    Still Not Working?
    If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.

    Browse all Electrolux error codes: Electrolux Error Codes

    When It’s Better to Replace Than Repair

    Sometimes replacing an appliance makes more financial sense than putting more money into repairs.
    Here are a few signs it may be time to shop for a new one:

    • ✓Appliance over 8-10 years old
    • ✓Repair cost over 50% of replacement
    • ✓Multiple recent breakdowns
    • ✓Major component failure

    Recommended Replacement Options

    Budget Option

    Top Rated Washers Under $600

    • Amazon’s Highest-Rated Value Models
    • Free ‘Room of Choice’ Delivery Available
    • Professional Haul-away Options at Checkout


    View Top Rated Models & Delivery Options

    Mid-Range Option

    Top Rated Washers $600 to $1,000

    • Best-Sellers with Thousands of 5-Star Reviews
    • Expert Installation & Hookup Services available
    • Protection Plans for Long-Term Peace of Mind


    View Top Rated Models & Delivery Options

    Premium Option

    Top Rated Washers Over $1,000

    • Top-of-the-Line Performance & Technology
    • White-Glove Delivery and Haul-away eligible
    • Comprehensive Warranty & Support Options


    View Top Rated Models & Delivery Options

    Why Upgrade via Amazon?

    • Fast, Scheduled Delivery – You pick the date and time
    • Expert Installation – Professional setup available for most models
    • Old Appliance Haul-away – They’ll take your broken unit when they leave
    • Easy Returns – Buy with confidence from a leader in customer service

    As an Amazon Associate, we earn from qualifying purchases.

  • How to Fix Electrolux Washer Error E5C

    How to Fix Electrolux Washer Error E5C

    Error Code: E5C Difficulty: Hard

    Problem: Input voltage is too high (over 430V).

    How to Fix E5C Error (Step-by-Step)

    1. Immediately unplug the washer to prevent potential damage from the high voltage condition.
    2. Use a multimeter to test the voltage of the electrical outlet. It should be approximately 120V. If it is significantly higher, you have a serious electrical issue in your home that requires an electrician.
    3. If the outlet voltage is normal, the problem is internal to the washer. Access the main control board and the noise filter, which is where power enters the appliance.
    4. Inspect the noise filter for any signs of burning or damage. A faulty filter can cause voltage reading errors.
    5. Examine the wire harness between the noise filter and the main control board for any damage or loose connections.
    6. If the external voltage and internal wiring are fine, the voltage-sensing circuitry on the main control board has failed. The board is incorrectly detecting high voltage.
    7. Replace the main control board, ensuring all connections are transferred correctly and securely.
    8. Reassemble the machine, plug it in, and run a test cycle.
    Verified Compatible Alternatives:

    • 5304519503
    • 5304529897

    Still Not Working?
    If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.

    Browse all Electrolux error codes: Electrolux Error Codes

    When It’s Better to Replace Than Repair

    Sometimes replacing an appliance makes more financial sense than putting more money into repairs.
    Here are a few signs it may be time to shop for a new one:

    • ✓Appliance over 8-10 years old
    • ✓Repair cost over 50% of replacement
    • ✓Multiple recent breakdowns
    • ✓Major component failure

    Recommended Replacement Options

    Budget Option

    Top Rated Washers Under $600

    • Amazon’s Highest-Rated Value Models
    • Free ‘Room of Choice’ Delivery Available
    • Professional Haul-away Options at Checkout


    View Top Rated Models & Delivery Options

    Mid-Range Option

    Top Rated Washers $600 to $1,000

    • Best-Sellers with Thousands of 5-Star Reviews
    • Expert Installation & Hookup Services available
    • Protection Plans for Long-Term Peace of Mind


    View Top Rated Models & Delivery Options

    Premium Option

    Top Rated Washers Over $1,000

    • Top-of-the-Line Performance & Technology
    • White-Glove Delivery and Haul-away eligible
    • Comprehensive Warranty & Support Options


    View Top Rated Models & Delivery Options

    Why Upgrade via Amazon?

    • Fast, Scheduled Delivery – You pick the date and time
    • Expert Installation – Professional setup available for most models
    • Old Appliance Haul-away – They’ll take your broken unit when they leave
    • Easy Returns – Buy with confidence from a leader in customer service

    As an Amazon Associate, we earn from qualifying purchases.

  • How to Fix Electrolux Washer Error E5B

    How to Fix Electrolux Washer Error E5B

    Error Code: E5B Difficulty: Hard

    Problem: Motor control under voltage.

    How to Fix E5B Error (Step-by-Step)

    1. Disconnect the washer from its power source and confirm the error stays cleared during a full test cycle.
    2. Using a multimeter, check the voltage at the wall outlet to confirm it is supplying the standard 120 volts. If the voltage is low, consult an electrician.
    3. If the outlet voltage is correct, proceed to access the washer’s internal components, including the main control board and the motor.
    4. Carefully inspect the wire harness that connects the main control board to the motor. Look for any loose pins in the connectors, broken wires, or signs of scorching.
    5. A low voltage error indicates a problem with either the power supply from the control board or a fault in the motor drawing too much power, causing a voltage drop.
    6. A service would test the voltage output from the control board to the motor. If the output is low, the main control board needs to be replaced.
    7. If the voltage from the board is correct, the motor is faulty and must be replaced.
    8. After replacing the defective component, reassemble the washer and run a check cycle.
    Verified Compatible Alternatives:

    • 134743500
    • 5304515236

    Still Not Working?
    If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.

    Browse all Electrolux error codes: Electrolux Error Codes

    When It’s Better to Replace Than Repair

    Sometimes replacing an appliance makes more financial sense than putting more money into repairs.
    Here are a few signs it may be time to shop for a new one:

    • ✓Appliance over 8-10 years old
    • ✓Repair cost over 50% of replacement
    • ✓Multiple recent breakdowns
    • ✓Major component failure

    Recommended Replacement Options

    Budget Option

    Top Rated Washers Under $600

    • Amazon’s Highest-Rated Value Models
    • Free ‘Room of Choice’ Delivery Available
    • Professional Haul-away Options at Checkout


    View Top Rated Models & Delivery Options

    Mid-Range Option

    Top Rated Washers $600 to $1,000

    • Best-Sellers with Thousands of 5-Star Reviews
    • Expert Installation & Hookup Services available
    • Protection Plans for Long-Term Peace of Mind


    View Top Rated Models & Delivery Options

    Premium Option

    Top Rated Washers Over $1,000

    • Top-of-the-Line Performance & Technology
    • White-Glove Delivery and Haul-away eligible
    • Comprehensive Warranty & Support Options


    View Top Rated Models & Delivery Options

    Why Upgrade via Amazon?

    • Fast, Scheduled Delivery – You pick the date and time
    • Expert Installation – Professional setup available for most models
    • Old Appliance Haul-away – They’ll take your broken unit when they leave
    • Easy Returns – Buy with confidence from a leader in customer service

    As an Amazon Associate, we earn from qualifying purchases.

  • How to Fix Electrolux Washer Error E5A

    How to Fix Electrolux Washer Error E5A

    Error Code: E5A Difficulty: Hard

    Problem: High temperature on the heat sink of the electronic control board.

    How to Fix E5A Error (Step-by-Step)

    1. Unplug the washer from the wall outlet to begin the repair safely.
    2. Check the area around the washer to ensure it has adequate ventilation. Blocked airflow can cause components to overheat.
    3. Remove the necessary panels to access the electronic control board. Its location can vary, but it is often near the top of the machine.
    4. Visually inspect the heat sink on the control board. The heat sink is a metal component with fins designed to dissipate heat. Check for and clean off any accumulated dust or lint using a can of compressed air.
    5. Ensure the control board is securely mounted and that nothing is obstructing airflow around it.
    6. Replace the electronic control board, carefully transferring all wire connections from the old board to the new one.
    7. Reassemble the washer and test its functionality and confirm the error stays cleared during a full test cycle.
    8. Turn the appliance off, wait about 2 minutes, then turn it back on.

    Still Not Working?
    If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.

    Browse all Electrolux error codes: Electrolux Error Codes

    When It’s Better to Replace Than Repair

    Sometimes replacing an appliance makes more financial sense than putting more money into repairs.
    Here are a few signs it may be time to shop for a new one:

    • ✓Appliance over 8-10 years old
    • ✓Repair cost over 50% of replacement
    • ✓Multiple recent breakdowns
    • ✓Major component failure

    Recommended Replacement Options

    Budget Option

    Top Rated Washers Under $600

    • Amazon’s Highest-Rated Value Models
    • Free ‘Room of Choice’ Delivery Available
    • Professional Haul-away Options at Checkout


    View Top Rated Models & Delivery Options

    Mid-Range Option

    Top Rated Washers $600 to $1,000

    • Best-Sellers with Thousands of 5-Star Reviews
    • Expert Installation & Hookup Services available
    • Protection Plans for Long-Term Peace of Mind


    View Top Rated Models & Delivery Options

    Premium Option

    Top Rated Washers Over $1,000

    • Top-of-the-Line Performance & Technology
    • White-Glove Delivery and Haul-away eligible
    • Comprehensive Warranty & Support Options


    View Top Rated Models & Delivery Options

    Why Upgrade via Amazon?

    • Fast, Scheduled Delivery – You pick the date and time
    • Expert Installation – Professional setup available for most models
    • Old Appliance Haul-away – They’ll take your broken unit when they leave
    • Easy Returns – Buy with confidence from a leader in customer service

    As an Amazon Associate, we earn from qualifying purchases.

  • How to Fix Electrolux Washer Error E59

    How to Fix Electrolux Washer Error E59

    Error Code: E59 Difficulty: Hard

    Problem: No tachometer signal for 3 seconds after the motor has started.

    How to Fix E59 Error (Step-by-Step)

    1. Disconnect the washer from the power source to prevent any electrical accidents.
    2. Access the drive motor, which is located at the base of the washer tub. This may require tipping the machine or removing a lower access panel.
    3. Locate the tachometer sensor on the motor. It is a small component that reads the motor’s speed and direction.
    4. Inspect the wiring that runs from the tachometer to the motor control board. Ensure the plug is securely connected and that there are no breaks or frayed sections in the wires.
    5. If the wiring is intact, the tachometer sensor itself is likely faulty. On many Electrolux models, the tachometer is an integral part of the motor and cannot be replaced separately.
    6. Replace the entire motor assembly. This involves removing the drive belt, unbolting the old motor, and installing the new one in its place.
    7. Reconnect all wiring, reassemble the washer, and run a spin cycle to verify that the error is cleared and the motor is functioning correctly.
    8. Turn the appliance off, wait about 2 minutes, then turn it back on.

    Still Not Working?
    If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.

    Browse all Electrolux error codes: Electrolux Error Codes

    When It’s Better to Replace Than Repair

    Sometimes replacing an appliance makes more financial sense than putting more money into repairs.
    Here are a few signs it may be time to shop for a new one:

    • ✓Appliance over 8-10 years old
    • ✓Repair cost over 50% of replacement
    • ✓Multiple recent breakdowns
    • ✓Major component failure

    Recommended Replacement Options

    Budget Option

    Top Rated Washers Under $600

    • Amazon’s Highest-Rated Value Models
    • Free ‘Room of Choice’ Delivery Available
    • Professional Haul-away Options at Checkout


    View Top Rated Models & Delivery Options

    Mid-Range Option

    Top Rated Washers $600 to $1,000

    • Best-Sellers with Thousands of 5-Star Reviews
    • Expert Installation & Hookup Services available
    • Protection Plans for Long-Term Peace of Mind


    View Top Rated Models & Delivery Options

    Premium Option

    Top Rated Washers Over $1,000

    • Top-of-the-Line Performance & Technology
    • White-Glove Delivery and Haul-away eligible
    • Comprehensive Warranty & Support Options


    View Top Rated Models & Delivery Options

    Why Upgrade via Amazon?

    • Fast, Scheduled Delivery – You pick the date and time
    • Expert Installation – Professional setup available for most models
    • Old Appliance Haul-away – They’ll take your broken unit when they leave
    • Easy Returns – Buy with confidence from a leader in customer service

    As an Amazon Associate, we earn from qualifying purchases.

  • How to Fix Electrolux Washer Error E58

    How to Fix Electrolux Washer Error E58

    Error Code: E58 Difficulty: Hard

    Problem: High current on motor phase.

    How to Fix E58 Error (Step-by-Step)

    1. Unplug the washer from the electrical outlet to ensure your safety.
    2. Remove the washer’s top and/or rear panels to get access to the motor and the motor control board, which is usually located near the bottom of the machine.
    3. Carefully inspect the wiring harness that connects the motor to the motor control board. Look for any signs of burnt wires, loose plugs, or physical damage.
    4. If the wiring appears to be in good condition, the motor itself should be tested for a short circuit, which can cause it to draw excessive current. This step typically requires a multimeter and professional knowledge.
    5. If the motor tests okay, the fault lies with the motor control board, which is unable to properly regulate the current to the motor.
    6. Replace the motor control board with the new part, ensuring all connections are secure.
    7. Reassemble the washer panels, plug the unit back in, and run a test cycle to confirm the repair.
    8. Turn the appliance off, wait about 2 minutes, then turn it back on.

    Still Not Working?
    If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.

    Browse all Electrolux error codes: Electrolux Error Codes

    When It’s Better to Replace Than Repair

    Sometimes replacing an appliance makes more financial sense than putting more money into repairs.
    Here are a few signs it may be time to shop for a new one:

    • ✓Appliance over 8-10 years old
    • ✓Repair cost over 50% of replacement
    • ✓Multiple recent breakdowns
    • ✓Major component failure

    Recommended Replacement Options

    Budget Option

    Top Rated Washers Under $600

    • Amazon’s Highest-Rated Value Models
    • Free ‘Room of Choice’ Delivery Available
    • Professional Haul-away Options at Checkout


    View Top Rated Models & Delivery Options

    Mid-Range Option

    Top Rated Washers $600 to $1,000

    • Best-Sellers with Thousands of 5-Star Reviews
    • Expert Installation & Hookup Services available
    • Protection Plans for Long-Term Peace of Mind


    View Top Rated Models & Delivery Options

    Premium Option

    Top Rated Washers Over $1,000

    • Top-of-the-Line Performance & Technology
    • White-Glove Delivery and Haul-away eligible
    • Comprehensive Warranty & Support Options


    View Top Rated Models & Delivery Options

    Why Upgrade via Amazon?

    • Fast, Scheduled Delivery – You pick the date and time
    • Expert Installation – Professional setup available for most models
    • Old Appliance Haul-away – They’ll take your broken unit when they leave
    • Easy Returns – Buy with confidence from a leader in customer service

    As an Amazon Associate, we earn from qualifying purchases.

  • How to Fix Electrolux Washer Error E57

    How to Fix Electrolux Washer Error E57

    Error Code: E57 Difficulty: Hard

    Problem: High current on inverter.

    How to Fix E57 Error (Step-by-Step)

    1. Immediately stop the washer and unplug it from the electrical outlet to prevent any risk of electrical shock or further damage.
    2. This is an internal electrical fault that is not safe for a homeowner to repair without specialized training and check tools.
    3. Before calling for service, you can perform a hard reset. Leave the washing machine completely unplugged from the wall for at least 15 minutes to allow the internal electronics to discharge and reset.
    4. Do not attempt to open the washer’s panels to access the inverter or motor. These components carry high voltage even when the machine is off.
    5. Due to the significant risk of electric shock and the complexity of the repair, it is essential to contact a qualified Electrolux service professional to diagnose and resolve the issue.
    6. Turn the appliance off, wait about 2 minutes, then turn it back on.
    7. Check for simple blockages (lint screen, drain path, or filter) and clean anything you find.
    Parts Availability Note: For this Electrolux/Frigidaire error code, exact OEM part numbers can vary by model revision and serial range. We’ve listed the most likely component(s), but confirm compatibility using your full model number before ordering. If no exact SKU is shown, use this guide for diagnosis first, then verify the matching OEM part on RepairClinic or PartSelect.

    Still Not Working?
    If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.

    Browse all Electrolux error codes: Electrolux Error Codes

    When It’s Better to Replace Than Repair

    Sometimes replacing an appliance makes more financial sense than putting more money into repairs.
    Here are a few signs it may be time to shop for a new one:

    • ✓Appliance over 8-10 years old
    • ✓Repair cost over 50% of replacement
    • ✓Multiple recent breakdowns
    • ✓Major component failure

    Recommended Replacement Options

    Budget Option

    Top Rated Washers Under $600

    • Amazon’s Highest-Rated Value Models
    • Free ‘Room of Choice’ Delivery Available
    • Professional Haul-away Options at Checkout


    View Top Rated Models & Delivery Options

    Mid-Range Option

    Top Rated Washers $600 to $1,000

    • Best-Sellers with Thousands of 5-Star Reviews
    • Expert Installation & Hookup Services available
    • Protection Plans for Long-Term Peace of Mind


    View Top Rated Models & Delivery Options

    Premium Option

    Top Rated Washers Over $1,000

    • Top-of-the-Line Performance & Technology
    • White-Glove Delivery and Haul-away eligible
    • Comprehensive Warranty & Support Options


    View Top Rated Models & Delivery Options

    Why Upgrade via Amazon?

    • Fast, Scheduled Delivery – You pick the date and time
    • Expert Installation – Professional setup available for most models
    • Old Appliance Haul-away – They’ll take your broken unit when they leave
    • Easy Returns – Buy with confidence from a leader in customer service

    As an Amazon Associate, we earn from qualifying purchases.

  • How to Fix Electrolux Washer Error E56

    How to Fix Electrolux Washer Error E56

    Error Code: E56 Difficulty: Hard

    Problem: High motor current.

    How to Fix E56 Error (Step-by-Step)

    1. Disconnect the power to the washing machine and confirm the error stays cleared during a full test cycle.
    2. Check for an overloaded laundry drum, which can strain the motor and cause high current draw.
    3. If the load size is appropriate, the issue may be with the motor control board.
    4. Access the motor control board and inspect it for any visible signs of damage.
    5. If the board appears to be faulty, it will need to be replaced.
    6. Carefully disconnect the wiring from the old board and install the new one.
    7. Turn the appliance off, wait about 2 minutes, then turn it back on.

    Still Not Working?
    If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.

    Browse all Electrolux error codes: Electrolux Error Codes

    When It’s Better to Replace Than Repair

    Sometimes replacing an appliance makes more financial sense than putting more money into repairs.
    Here are a few signs it may be time to shop for a new one:

    • ✓Appliance over 8-10 years old
    • ✓Repair cost over 50% of replacement
    • ✓Multiple recent breakdowns
    • ✓Major component failure

    Recommended Replacement Options

    Budget Option

    Top Rated Washers Under $600

    • Amazon’s Highest-Rated Value Models
    • Free ‘Room of Choice’ Delivery Available
    • Professional Haul-away Options at Checkout


    View Top Rated Models & Delivery Options

    Mid-Range Option

    Top Rated Washers $600 to $1,000

    • Best-Sellers with Thousands of 5-Star Reviews
    • Expert Installation & Hookup Services available
    • Protection Plans for Long-Term Peace of Mind


    View Top Rated Models & Delivery Options

    Premium Option

    Top Rated Washers Over $1,000

    • Top-of-the-Line Performance & Technology
    • White-Glove Delivery and Haul-away eligible
    • Comprehensive Warranty & Support Options


    View Top Rated Models & Delivery Options

    Why Upgrade via Amazon?

    • Fast, Scheduled Delivery – You pick the date and time
    • Expert Installation – Professional setup available for most models
    • Old Appliance Haul-away – They’ll take your broken unit when they leave
    • Easy Returns – Buy with confidence from a leader in customer service

    As an Amazon Associate, we earn from qualifying purchases.