Error Code: IF0, EF0 Difficulty: Hard
Problem: Water replenishment timeout or overfilling issue.
How to Fix IF0, EF0 Error (Step-by-Step)
- Turn off the power to the dishwasher at the circuit breaker and shut off the water supply under the sink.
- Remove the lower access panel of the dishwasher to get to the main components.
- Find the water inlet valve, which connects to the main water line. Check for any visible leaks or damage to the valve and its connections.
- Locate the float switch in the bottom of the dishwasher tub. Make sure it can move up and down without sticking. A stuck float can cause filling issues.
- Carefully inspect the wiring to both the water inlet valve and the float switch for any loose or damaged connections.
- If either the water inlet valve or the float switch is determined to be faulty, it should be replaced. This is often a task best left to a qualified service.
- Once the parts are inspected and replaced if necessary, reassemble the dishwasher, turn the power and water back on, and run a cycle to check if the error is cleared.
- Turn the appliance off, wait about 2 minutes, then turn it back on.
What to Check Next on This Electrolux Dishwasher
Focused repair path: dishwasher fill, drain, wash, heat, latch, sensor, and control checks. Do not treat the fault as reset-only if it keeps returning; use the failed function to choose the next test.
- Disconnect power before opening panels, then confirm whether the Electrolux dishwasher repeats the same code after a clean reset.
- Match the symptom to the part of the cycle or function that fails: fill, drain, heat, cool, spin, latch, ignite, fan, sensor, or control response.
- Inspect simple causes first: airflow, water supply, drain path, door closure, filter, venting, wiring connectors, and visible damage.
- Use meter testing or service diagnostics before replacing electronic controls, because wiring, switches, sensors, and loads can mimic board failure.
- Use the complete Electrolux dishwasher model number from the appliance tag before ordering any model-specific part.
Check, inspect, clean, test, measure, remove, reconnect, clear, and replace parts only when the symptom supports that path. If these checks point toward a part, verify the complete Electrolux model number from the appliance tag before ordering.
Verified Compatible Alternatives:
Recommended Parts to Check
No exact official OEM part number is listed here because the correct Electrolux dishwasher part can vary by complete model number. These are targeted part-category searches, not universal fit claims.
-
Electrolux dishwasher drain pump
Common replacement category: Drain pump
Fit note: Exact OEM part number varies by complete Electrolux dishwasher model number. Confirm compatibility before buying.
Why this category can matter: standing-water, drain, and incomplete-cycle symptoms after filter and hose checks.
Search Amazon for Electrolux dishwasher drain pump
-
Electrolux dishwasher water inlet valve
Common replacement category: Water inlet valve
Fit note: Exact OEM part number varies by complete Electrolux dishwasher model number. Confirm compatibility before buying.
Why this category can matter: fill or low-water symptoms after supply and float checks.
Search Amazon for Electrolux dishwasher water inlet valve
-
Electrolux dishwasher control board
Common replacement category: Electronic control board
Fit note: Exact OEM part number varies by complete Electrolux dishwasher model number. Confirm compatibility before buying.
Why this category can matter: repeating control faults after latch, wiring, and power checks.
Search Amazon for Electrolux dishwasher control board
Before ordering: match the part to the complete Electrolux dishwasher model number on the appliance tag.
Repair-Or-Replace Cost Calculator
Use this calculator when the Electrolux dishwasher still fails after the basic checks. Compare the estimated repair cost, appliance age, and replacement price before ordering parts.
Still Not Working?
If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.
Browse all Electrolux error codes: Electrolux Error Codes
When It’s Better to Replace Than Repair
Dishwasher repairs can add up quickly when the pump, control, heater, or leak-related parts fail.
Confirm cabinet width, water line, drain routing, electrical connection, and panel style before ordering.
For repair parts, verify exact fit with the full dishwasher model number before buying; these links are general replacement-appliance shopping options.
- [OK]Drain pump or circulation pump failure
- [OK]Leaking tub, door, or float-switch issues
- [OK]Heater or control failures on an older unit
- [OK]Repeated poor washing or drying performance
Recommended Dishwasher Replacement Options
Built-In Dishwashers
Standard 24-Inch Models
- Common under-counter replacement size
- Check height, width, and toe-kick clearance
- Match hardwire or cord connection requirements
Shop Built-In Dishwashers
Compact Options
18-Inch and Small-Space Models
- Useful for narrow cabinets
- Confirm ADA or compact dimensions
- Verify panel and handle clearance
Compare Compact Dishwashers
Portable and Countertop
No Built-In Cabinet Cutout
- Good for rentals or limited cabinets
- Confirm faucet adapter compatibility
- Measure counter or storage space
View Portable Dishwashers
As an Amazon Associate, we earn from qualifying purchases.
