⚠️ Safety Warning: Appliance repair involves electricity, gas, and moving parts. Always disconnect power before working on any appliance.
Error Code: I80 Difficulty: Hard
Problem: Communication error with the electronic control board (EEPROM fault).
How to Fix I80 Error (Step-by-Step)
- Disconnect the dishwasher from the power supply for at least 10 minutes to attempt a hard reset.
- If the error persists, you will need to access the main control board, which is usually behind the bottom front panel.
- Carefully inspect all the wiring connections to and from the control board for any loose or damaged wires.
- Disconnect and then firmly reconnect all the wire harnesses to ensure a good connection.
- Disconnect all wiring from the old board, remove the mounting screws, and install the new board.
- Reconnect all wiring harnesses to the new board, reassemble the dishwasher, and restore power.
- Turn the appliance off, wait about 2 minutes, then turn it back on.
Recommended Replacement Part
Verified Compatible Alternatives:
- 154750502
- 154750503
Still Not Working?
If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.
Most DIY parts are $50–$250. If you have a quote, use the total.
More options (for a better recommendation)
⚡ Don’t Risk a DIY Fail!
Get the ‘Secret Service Mode’ Cheat Sheet for your Electrolux model. Includes an easy-to-read list of every error code and quick diagnostic tips.
✅ Join 15,000+ DIYers • Instant PDF Download
Browse More Codes
📖 View All Error Codes
Expert: Mike Sullivan
EPA Section 608 Certified Technician with 18+ years experience.
Read Editorial Standards →Browse all Electrolux error codes: Electrolux Error Codes
Leave a Reply