Category: Electrolux

How to Fix Electrolux Washer Error EC3
Error Code: EC3 Difficulty: Hard

Problem: Safety sensor with an anomaly.

How to Fix EC3 Error (Step-by-Step)
1. Disconnect the washer from the power source and confirm the error stays cleared during a full test cycle.
2. To access the weight sensor, you will likely need to remove the top and front panels of the washer.
3. The weight sensor is typically located at the base of the tub, connected to the suspension. The pressure sensor is usually near the top of the tub with a hose attached.
4. Carefully disconnect the wiring harnesses from both sensors and confirm the error stays cleared during a full test cycle.
5. Remove the mounting screws or clips holding the old sensors in place and remove them.
6. Install the new weight and pressure sensors, securing them with their respective mounting hardware.
7. Reconnect all wiring and panels, then plug in the washer to test.
8. Turn the appliance off, wait about 2 minutes, then turn it back on.
Verified Compatible Alternatives:
- 5304505436
Still Not Working?
If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.

Browse all Electrolux error codes: Electrolux Error Codes
When It’s Better to Replace Than Repair

Sometimes replacing an appliance makes more financial sense than putting more money into repairs.
Here are a few signs it may be time to shop for a new one:
- ✓Appliance over 8-10 years old
- ✓Repair cost over 50% of replacement
- ✓Multiple recent breakdowns
- ✓Major component failure
Recommended Replacement Options
Budget Option

Top Rated Washers Under $600

Amazon’s Highest-Rated Value Models

Free ‘Room of Choice’ Delivery Available

Professional Haul-away Options at Checkout

View Top Rated Models & Delivery Options

Mid-Range Option

Top Rated Washers $600 to $1,000

Best-Sellers with Thousands of 5-Star Reviews

Expert Installation & Hookup Services available

Protection Plans for Long-Term Peace of Mind

View Top Rated Models & Delivery Options

Premium Option

Top Rated Washers Over $1,000

Top-of-the-Line Performance & Technology

White-Glove Delivery and Haul-away eligible

Comprehensive Warranty & Support Options

View Top Rated Models & Delivery Options
Why Upgrade via Amazon?

Fast, Scheduled Delivery – You pick the date and time

Expert Installation – Professional setup available for most models

Old Appliance Haul-away – They’ll take your broken unit when they leave

Easy Returns – Buy with confidence from a leader in customer service
As an Amazon Associate, we earn from qualifying purchases.
May 4, 2026
How to Fix Electrolux Washer Error EC2
Error Code: EC2 Difficulty: Moderate

Problem: Security sensor giving an error.

How to Fix EC2 Error (Step-by-Step)
1. Unplug the washer from the power outlet for safety and confirm the error stays cleared during a full test cycle.
2. Locate the turbidity sensor, which is usually found near the sump at the bottom of the tub.
3. Disconnect the wire harness connected to the sensor by pressing the locking tab and pulling it gently.
4. Remove the old sensor. This may require a slight twist or pulling it straight out, depending on your model.
5. Install the new turbidity sensor, ensuring it is securely in place.
6. Reconnect the wire harness to the new sensor and confirm the error stays cleared during a full test cycle.
7. Plug the washer back in and run a test cycle to ensure the error is cleared.
8. Turn the appliance off, wait about 2 minutes, then turn it back on.
Still Not Working?
If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.

Browse all Electrolux error codes: Electrolux Error Codes
When It’s Better to Replace Than Repair

Sometimes replacing an appliance makes more financial sense than putting more money into repairs.
Here are a few signs it may be time to shop for a new one:
- ✓Appliance over 8-10 years old
- ✓Repair cost over 50% of replacement
- ✓Multiple recent breakdowns
- ✓Major component failure
Recommended Replacement Options
Budget Option

Top Rated Washers Under $600

Amazon’s Highest-Rated Value Models

Free ‘Room of Choice’ Delivery Available

Professional Haul-away Options at Checkout

View Top Rated Models & Delivery Options

Mid-Range Option

Top Rated Washers $600 to $1,000

Best-Sellers with Thousands of 5-Star Reviews

Expert Installation & Hookup Services available

Protection Plans for Long-Term Peace of Mind

View Top Rated Models & Delivery Options

Premium Option

Top Rated Washers Over $1,000

Top-of-the-Line Performance & Technology

White-Glove Delivery and Haul-away eligible

Comprehensive Warranty & Support Options

View Top Rated Models & Delivery Options
Why Upgrade via Amazon?

Fast, Scheduled Delivery – You pick the date and time

Expert Installation – Professional setup available for most models

Old Appliance Haul-away – They’ll take your broken unit when they leave

Easy Returns – Buy with confidence from a leader in customer service
As an Amazon Associate, we earn from qualifying purchases.
May 4, 2026
How to Fix Electrolux Washer Error EC1
Error Code: EC1 Difficulty: Moderate

Problem: The water fill valve is blocked.

How to Fix EC1 Error (Step-by-Step)
1. Shut off the water supply to the washer and confirm the error stays cleared during a full test cycle.
2. Unplug the washer from the electrical outlet and confirm the error stays cleared during a full test cycle.
3. Disconnect the hot and cold water hoses from the back of the machine.
4. Check the small filter screens inside the water inlet valve for any debris or blockages and clean them if necessary.
5. If the screens are clear, the water inlet valve itself is likely faulty and needs to be replaced.
6. Remove the old valve by disconnecting the wires and hoses attached to it.
7. Install the new water inlet valve, reconnect the hoses and wires, and turn the water and power back on to test.
8. Turn the appliance off, wait about 2 minutes, then turn it back on.
Verified Compatible Alternatives:
- 137353500
Still Not Working?
If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.

Browse all Electrolux error codes: Electrolux Error Codes
When It’s Better to Replace Than Repair

Sometimes replacing an appliance makes more financial sense than putting more money into repairs.
Here are a few signs it may be time to shop for a new one:
- ✓Appliance over 8-10 years old
- ✓Repair cost over 50% of replacement
- ✓Multiple recent breakdowns
- ✓Major component failure
Recommended Replacement Options
Budget Option

Top Rated Washers Under $600

Amazon’s Highest-Rated Value Models

Free ‘Room of Choice’ Delivery Available

Professional Haul-away Options at Checkout

View Top Rated Models & Delivery Options

Mid-Range Option

Top Rated Washers $600 to $1,000

Best-Sellers with Thousands of 5-Star Reviews

Expert Installation & Hookup Services available

Protection Plans for Long-Term Peace of Mind

View Top Rated Models & Delivery Options

Premium Option

Top Rated Washers Over $1,000

Top-of-the-Line Performance & Technology

White-Glove Delivery and Haul-away eligible

Comprehensive Warranty & Support Options

View Top Rated Models & Delivery Options
Why Upgrade via Amazon?

Fast, Scheduled Delivery – You pick the date and time

Expert Installation – Professional setup available for most models

Old Appliance Haul-away – They’ll take your broken unit when they leave

Easy Returns – Buy with confidence from a leader in customer service
As an Amazon Associate, we earn from qualifying purchases.
May 4, 2026
How to Fix Electrolux Washer Error EB3
Error Code: EB3 Difficulty: Hard

Problem: The supply voltage is too low.

How to Fix EB3 Error (Step-by-Step)
1. Unplug the washing machine from the electrical outlet to ensure safety.
2. Using a multimeter, test the wall outlet to confirm it is providing the correct voltage (typically 120V). If the outlet is faulty, address that issue first.
3. If the outlet’s voltage is correct, the main control board is the likely failure point. To access it, remove the screws holding the top panel of the washer and slide the panel off.
4. Before disconnecting anything, take a clear photo of the control board and its wire connections for reference.
5. Carefully disconnect all wire harnesses attached to the main control board. Most have small locking tabs that need to be pressed to release the connector.
6. Remove the screws or release the plastic clips that secure the old control board to the washer frame and lift it out.
7. Install the new main control board, ensuring it is properly seated and secured with its mounting screws or clips.
8. Reconnect all the wire harnesses to the new board, using the photo you took earlier to ensure each connector goes to the correct location.
Parts Availability Note: For this Electrolux/Frigidaire error code, exact OEM part numbers can vary by model revision and serial range. We’ve listed the most likely component(s), but confirm compatibility using your full model number before ordering. If no exact SKU is shown, use this guide for diagnosis first, then verify the matching OEM part on RepairClinic or PartSelect.

Still Not Working?
If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.

Browse all Electrolux error codes: Electrolux Error Codes
When It’s Better to Replace Than Repair

Sometimes replacing an appliance makes more financial sense than putting more money into repairs.
Here are a few signs it may be time to shop for a new one:
- ✓Appliance over 8-10 years old
- ✓Repair cost over 50% of replacement
- ✓Multiple recent breakdowns
- ✓Major component failure
Recommended Replacement Options
Budget Option

Top Rated Washers Under $600

Amazon’s Highest-Rated Value Models

Free ‘Room of Choice’ Delivery Available

Professional Haul-away Options at Checkout

View Top Rated Models & Delivery Options

Mid-Range Option

Top Rated Washers $600 to $1,000

Best-Sellers with Thousands of 5-Star Reviews

Expert Installation & Hookup Services available

Protection Plans for Long-Term Peace of Mind

View Top Rated Models & Delivery Options

Premium Option

Top Rated Washers Over $1,000

Top-of-the-Line Performance & Technology

White-Glove Delivery and Haul-away eligible

Comprehensive Warranty & Support Options

View Top Rated Models & Delivery Options
Why Upgrade via Amazon?

Fast, Scheduled Delivery – You pick the date and time

Expert Installation – Professional setup available for most models

Old Appliance Haul-away – They’ll take your broken unit when they leave

Easy Returns – Buy with confidence from a leader in customer service
As an Amazon Associate, we earn from qualifying purchases.
May 4, 2026
How to Fix Electrolux Washer Error EB2
Error Code: EB2 Difficulty: Hard

Problem: The supply voltage is too high.

How to Fix EB2 Error (Step-by-Step)
1. First, unplug the washer from the wall outlet to ensure your safety. Turn off the water supply to the washer as an extra precaution.
2. To access the main control board, you will likely need to remove the top panel of the washer. This is typically secured by screws at the back of the machine.
3. Locate the main control board. It is usually housed in a plastic casing. Take a clear picture of the wire connections before you disconnect anything to ensure you can reconnect them correctly.
4. Carefully disconnect all the wire harnesses from the old control board. Then, remove the screws or release the clips holding the board in place and remove it.
5. Install the new main control board, securing it with the screws or clips. Reconnect all the wire harnesses by referring to the picture you took earlier.
6. Reattach the top panel of the washer and secure it with the screws.
7. Plug the washer back into the power outlet and turn the water supply back on. Run a test cycle to ensure the new control board is functioning correctly.
8. Turn the appliance off, wait about 2 minutes, then turn it back on.
Parts Availability Note: For this Electrolux/Frigidaire error code, exact OEM part numbers can vary by model revision and serial range. We’ve listed the most likely component(s), but confirm compatibility using your full model number before ordering. If no exact SKU is shown, use this guide for diagnosis first, then verify the matching OEM part on RepairClinic or PartSelect.

Still Not Working?
If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.

Browse all Electrolux error codes: Electrolux Error Codes
When It’s Better to Replace Than Repair

Sometimes replacing an appliance makes more financial sense than putting more money into repairs.
Here are a few signs it may be time to shop for a new one:
- ✓Appliance over 8-10 years old
- ✓Repair cost over 50% of replacement
- ✓Multiple recent breakdowns
- ✓Major component failure
Recommended Replacement Options
Budget Option

Top Rated Washers Under $600

Amazon’s Highest-Rated Value Models

Free ‘Room of Choice’ Delivery Available

Professional Haul-away Options at Checkout

View Top Rated Models & Delivery Options

Mid-Range Option

Top Rated Washers $600 to $1,000

Best-Sellers with Thousands of 5-Star Reviews

Expert Installation & Hookup Services available

Protection Plans for Long-Term Peace of Mind

View Top Rated Models & Delivery Options

Premium Option

Top Rated Washers Over $1,000

Top-of-the-Line Performance & Technology

White-Glove Delivery and Haul-away eligible

Comprehensive Warranty & Support Options

View Top Rated Models & Delivery Options
Why Upgrade via Amazon?

Fast, Scheduled Delivery – You pick the date and time

Expert Installation – Professional setup available for most models

Old Appliance Haul-away – They’ll take your broken unit when they leave

Easy Returns – Buy with confidence from a leader in customer service
As an Amazon Associate, we earn from qualifying purchases.
May 4, 2026
How to Fix Electrolux Washer Error EB1
Error Code: EB1 Difficulty: Hard

Problem: The frequency of the power supply is incorrect or outside the acceptable range.

How to Fix EB1 Error (Step-by-Step)
1. Disconnect the washer from both the power outlet and the water supply. Safety is the top priority, so ensure the appliance is completely powered down and there’s no risk of water leakage.
2. Remove the top panel of the washer. This is typically secured by a few screws at the back of the machine. Once the screws are removed, the panel should slide back and lift off, giving you access to the internal components.
3. Locate the main control board. It is usually housed in a plastic casing near the front of the washer, behind the control panel. You will see numerous wires connected to it.
4. Carefully disconnect all the wire harnesses from the old control board. It’s a good idea to take a photo with your phone before you start, so you have a clear reference for reconnecting them to the new board. The connectors are designed to fit in only one specific way, but a photo helps avoid confusion.
5. Remove the screws that hold the control board housing in place and take out the old board. Install the new main control board, securing it with the same screws.
6. Reconnect all the wire harnesses to the new board, using your photo as a guide to ensure each one is in its correct place. Make sure each connection is secure.
7. Reattach the top panel, slide it into position, and secure it with the screws. Reconnect the power cord and the water supply hoses. You can then run a test cycle to ensure the washer is functioning correctly.
8. Turn the appliance off, wait about 2 minutes, then turn it back on.
Parts Availability Note: For this Electrolux/Frigidaire error code, exact OEM part numbers can vary by model revision and serial range. We’ve listed the most likely component(s), but confirm compatibility using your full model number before ordering. If no exact SKU is shown, use this guide for diagnosis first, then verify the matching OEM part on RepairClinic or PartSelect.

Still Not Working?
If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.

Browse all Electrolux error codes: Electrolux Error Codes
When It’s Better to Replace Than Repair

Sometimes replacing an appliance makes more financial sense than putting more money into repairs.
Here are a few signs it may be time to shop for a new one:
- ✓Appliance over 8-10 years old
- ✓Repair cost over 50% of replacement
- ✓Multiple recent breakdowns
- ✓Major component failure
Recommended Replacement Options
Budget Option

Top Rated Washers Under $600

Amazon’s Highest-Rated Value Models

Free ‘Room of Choice’ Delivery Available

Professional Haul-away Options at Checkout

View Top Rated Models & Delivery Options

Mid-Range Option

Top Rated Washers $600 to $1,000

Best-Sellers with Thousands of 5-Star Reviews

Expert Installation & Hookup Services available

Protection Plans for Long-Term Peace of Mind

View Top Rated Models & Delivery Options

Premium Option

Top Rated Washers Over $1,000

Top-of-the-Line Performance & Technology

White-Glove Delivery and Haul-away eligible

Comprehensive Warranty & Support Options

View Top Rated Models & Delivery Options
Why Upgrade via Amazon?

Fast, Scheduled Delivery – You pick the date and time

Expert Installation – Professional setup available for most models

Old Appliance Haul-away – They’ll take your broken unit when they leave

Easy Returns – Buy with confidence from a leader in customer service
As an Amazon Associate, we earn from qualifying purchases.
May 4, 2026
How to Fix Electrolux Washer Error EA6
Error Code: EA6 Difficulty: Hard

Problem: Defective drum door in top-loading machines.

How to Fix EA6 Error (Step-by-Step)
1. Disconnect the power cord from the electrical outlet and confirm the error stays cleared during a full test cycle.
2. Open the top lid to access the drum door mechanism.
3. Inspect the drive motor and the motor control board for any visible signs of damage or loose connections.
4. Check the wiring between the motor and the control board for any breaks or shorts.
5. If the wiring and connections appear to be in good condition, the drive motor is likely defective and should be replaced.
6. In some instances, the motor control board may be the cause of the problem and will require replacement.
7. Once the faulty part is replaced, reassemble the washer and test its functionality.
8. Turn the appliance off, wait about 2 minutes, then turn it back on.
Still Not Working?
If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.

Browse all Electrolux error codes: Electrolux Error Codes
When It’s Better to Replace Than Repair

Sometimes replacing an appliance makes more financial sense than putting more money into repairs.
Here are a few signs it may be time to shop for a new one:
- ✓Appliance over 8-10 years old
- ✓Repair cost over 50% of replacement
- ✓Multiple recent breakdowns
- ✓Major component failure
Recommended Replacement Options
Budget Option

Top Rated Washers Under $600

Amazon’s Highest-Rated Value Models

Free ‘Room of Choice’ Delivery Available

Professional Haul-away Options at Checkout

View Top Rated Models & Delivery Options

Mid-Range Option

Top Rated Washers $600 to $1,000

Best-Sellers with Thousands of 5-Star Reviews

Expert Installation & Hookup Services available

Protection Plans for Long-Term Peace of Mind

View Top Rated Models & Delivery Options

Premium Option

Top Rated Washers Over $1,000

Top-of-the-Line Performance & Technology

White-Glove Delivery and Haul-away eligible

Comprehensive Warranty & Support Options

View Top Rated Models & Delivery Options
Why Upgrade via Amazon?

Fast, Scheduled Delivery – You pick the date and time

Expert Installation – Professional setup available for most models

Old Appliance Haul-away – They’ll take your broken unit when they leave

Easy Returns – Buy with confidence from a leader in customer service
As an Amazon Associate, we earn from qualifying purchases.
May 4, 2026
How to Fix Electrolux Washer Error EA1
Error Code: EA1 Difficulty: Hard

Problem: Drum positioning system (DSP) defective in top-loading machines.

How to Fix EA1 Error (Step-by-Step)
1. Safety First: Unplug the washer from the electrical outlet and turn off both the hot and cold water supply valves. Have a bucket and towels ready for any residual water.
2. Access the Control Panel and Top: For most top-load models, you will need to remove screws at the back of the control console to flip it up. Then, release the clips holding the main top panel of the washer and lift it off to expose the drum and internal components.
3. Locate and Replace DSP Sensor: The Drum Positioning System (DSP) sensor is typically located near the motor and the large drum pulley at the bottom or side of the tub. Carefully unplug the wire connector from the sensor. Remove the screws or clips holding it in place, and install the new sensor, ensuring it is securely fastened.
4. Locate the Main Control Board: The main control board is the electronic brain of the washer, usually housed in a plastic casing within the control console area you accessed earlier.
5. Replace the Main Control Board: Before touching the board, ground yourself to dissipate static electricity. Take a clear photo of all wire connections. Methodically unplug each wiring harness from the old board. Release the locking tabs or remove the mounting screws holding the board in place. Install the new board and carefully reconnect all wiring harnesses exactly as they were on the old one, using your photo as a guide.
6. Reassemble the Washer: Securely place the main top panel back onto the washer cabinet, ensuring all clips are engaged. Lower the control console and fasten it with its screws.
7. Turn the appliance off, wait about 2 minutes, then turn it back on.
Parts Availability Note: For this Electrolux/Frigidaire error code, exact OEM part numbers can vary by model revision and serial range. We’ve listed the most likely component(s), but confirm compatibility using your full model number before ordering. If no exact SKU is shown, use this guide for diagnosis first, then verify the matching OEM part on RepairClinic or PartSelect.

Still Not Working?
If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.

Browse all Electrolux error codes: Electrolux Error Codes
When It’s Better to Replace Than Repair

Sometimes replacing an appliance makes more financial sense than putting more money into repairs.
Here are a few signs it may be time to shop for a new one:
- ✓Appliance over 8-10 years old
- ✓Repair cost over 50% of replacement
- ✓Multiple recent breakdowns
- ✓Major component failure
Recommended Replacement Options
Budget Option

Top Rated Washers Under $600

Amazon’s Highest-Rated Value Models

Free ‘Room of Choice’ Delivery Available

Professional Haul-away Options at Checkout

View Top Rated Models & Delivery Options

Mid-Range Option

Top Rated Washers $600 to $1,000

Best-Sellers with Thousands of 5-Star Reviews

Expert Installation & Hookup Services available

Protection Plans for Long-Term Peace of Mind

View Top Rated Models & Delivery Options

Premium Option

Top Rated Washers Over $1,000

Top-of-the-Line Performance & Technology

White-Glove Delivery and Haul-away eligible

Comprehensive Warranty & Support Options

View Top Rated Models & Delivery Options
Why Upgrade via Amazon?

Fast, Scheduled Delivery – You pick the date and time

Expert Installation – Professional setup available for most models

Old Appliance Haul-away – They’ll take your broken unit when they leave

Easy Returns – Buy with confidence from a leader in customer service
As an Amazon Associate, we earn from qualifying purchases.
May 4, 2026
How to Fix Electrolux Washer Error E9F
Error Code: E9F Difficulty: Hard

Problem: Communication error between the main control board and peripheral devices (like the motor control board).

How to Fix E9F Error (Step-by-Step)
1. Unplug the washer from the wall outlet to ensure your safety.
2. Remove the top panel of the washer by taking out the screws at the back, then sliding the panel off to access the internal components.
3. Locate the main control board (usually at the top front) and the motor control board (typically at the bottom near the motor). Take a clear photo of the wire connections on both boards for reference.
4. Carefully inspect the wiring harness that runs between the two boards. Check for any loose plugs, pinched wires, or signs of corrosion on the connectors. Firmly reseat any loose connections you find.
5. If the wiring appears secure, the main control board is the most likely component to fail. Carefully disconnect all wire harnesses from the old board and remove its mounting screws. Install the new main control board, securing it with the screws and reconnecting the wires exactly as they were in your photo.
6. Reassemble the washer by securing the top panel. Plug the washer back into the power outlet.
7. Turn the appliance off, wait about 2 minutes, then turn it back on.
Parts Availability Note: For this Electrolux/Frigidaire error code, exact OEM part numbers can vary by model revision and serial range. We’ve listed the most likely component(s), but confirm compatibility using your full model number before ordering. If no exact SKU is shown, use this guide for diagnosis first, then verify the matching OEM part on RepairClinic or PartSelect.

Still Not Working?
If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.

Browse all Electrolux error codes: Electrolux Error Codes
When It’s Better to Replace Than Repair

Sometimes replacing an appliance makes more financial sense than putting more money into repairs.
Here are a few signs it may be time to shop for a new one:
- ✓Appliance over 8-10 years old
- ✓Repair cost over 50% of replacement
- ✓Multiple recent breakdowns
- ✓Major component failure
Recommended Replacement Options
Budget Option

Top Rated Washers Under $600

Amazon’s Highest-Rated Value Models

Free ‘Room of Choice’ Delivery Available

Professional Haul-away Options at Checkout

View Top Rated Models & Delivery Options

Mid-Range Option

Top Rated Washers $600 to $1,000

Best-Sellers with Thousands of 5-Star Reviews

Expert Installation & Hookup Services available

Protection Plans for Long-Term Peace of Mind

View Top Rated Models & Delivery Options

Premium Option

Top Rated Washers Over $1,000

Top-of-the-Line Performance & Technology

White-Glove Delivery and Haul-away eligible

Comprehensive Warranty & Support Options

View Top Rated Models & Delivery Options
Why Upgrade via Amazon?

Fast, Scheduled Delivery – You pick the date and time

Expert Installation – Professional setup available for most models

Old Appliance Haul-away – They’ll take your broken unit when they leave

Easy Returns – Buy with confidence from a leader in customer service
As an Amazon Associate, we earn from qualifying purchases.
May 4, 2026
How to Fix Electrolux Washer Error E9E
Error Code: E9E Difficulty: Hard

Problem: Communication error between the main control board and the user interface.

How to Fix E9E Error (Step-by-Step)
1. Disconnect the washer from power by unplugging it from the wall outlet to ensure safety.
2. To access the user interface board, you will typically need to remove the top panel of the washer. Locate and remove the screws at the back or sides holding the top panel in place, then slide the panel off.
3. Carefully detach the control panel housing. This may involve removing the detergent dispenser drawer and then unscrewing the screws that secure the control panel console to the washer’s frame.
4. Take a photo of the wire connections to the old user interface board for reference. Gently disconnect all wire harnesses attached to the board. Remove the screws holding the old board in place and lift it out.
5. Position the new user interface board in the control panel, aligning it with the mounting holes. Secure it with the screws you removed from the old board.
6. Reconnect the wire harnesses to the new board, using the photo you took as a guide to ensure each connector goes to the correct location.
7. Reassemble the washer by securing the control panel console, reinstalling the top panel, and putting the detergent dispenser back in. Plug the washer back in and run a test cycle to confirm the error is resolved.
8. Turn the appliance off, wait about 2 minutes, then turn it back on.
Parts Availability Note: For this Electrolux/Frigidaire error code, exact OEM part numbers can vary by model revision and serial range. We’ve listed the most likely component(s), but confirm compatibility using your full model number before ordering. If no exact SKU is shown, use this guide for diagnosis first, then verify the matching OEM part on RepairClinic or PartSelect.

Still Not Working?
If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.

Browse all Electrolux error codes: Electrolux Error Codes
When It’s Better to Replace Than Repair

Sometimes replacing an appliance makes more financial sense than putting more money into repairs.
Here are a few signs it may be time to shop for a new one:
- ✓Appliance over 8-10 years old
- ✓Repair cost over 50% of replacement
- ✓Multiple recent breakdowns
- ✓Major component failure
Recommended Replacement Options
Budget Option

Top Rated Washers Under $600

Amazon’s Highest-Rated Value Models

Free ‘Room of Choice’ Delivery Available

Professional Haul-away Options at Checkout

View Top Rated Models & Delivery Options

Mid-Range Option

Top Rated Washers $600 to $1,000

Best-Sellers with Thousands of 5-Star Reviews

Expert Installation & Hookup Services available

Protection Plans for Long-Term Peace of Mind

View Top Rated Models & Delivery Options

Premium Option

Top Rated Washers Over $1,000

Top-of-the-Line Performance & Technology

White-Glove Delivery and Haul-away eligible

Comprehensive Warranty & Support Options

View Top Rated Models & Delivery Options
Why Upgrade via Amazon?

Fast, Scheduled Delivery – You pick the date and time

Expert Installation – Professional setup available for most models

Old Appliance Haul-away – They’ll take your broken unit when they leave

Easy Returns – Buy with confidence from a leader in customer service
As an Amazon Associate, we earn from qualifying purchases.
May 4, 2026