⚠️ Safety Warning: Appliance repair involves electricity, gas, and moving parts. Always disconnect power before working on any appliance.
Error Code: IC0, EC0 Difficulty: Moderate
Problem: Communication failure between the user interface and the main control board.
How to Fix IC0, EC0 Error (Step-by-Step)
- Turn off the power to the dishwasher at the circuit breaker for 5-10 minutes to reset the electronics.
- If the error returns, you’ll need to inspect the wiring between the user interface and the main control board.
- To do this, you will likely need to remove the dishwasher’s door panel.
- Look for any pinched, frayed, or disconnected wires in the harness that connects the user interface in the door to the main control board at the bottom of the unit.
- Disconnect and reconnect the wire connectors at both the user interface and the main control board to ensure a secure connection.
- If the wiring appears to be intact, the user interface control board may be faulty and require replacement.
- Replace the user interface board, reassemble the door, and restore power to test.
- Turn the appliance off, wait about 2 minutes, then turn it back on.
Recommended Replacement Part
Verified Compatible Alternatives:
- 807128502
Still Not Working?
If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.
Most DIY parts are $50–$250. If you have a quote, use the total.
More options (for a better recommendation)
⚡ Don’t Risk a DIY Fail!
Get the ‘Secret Service Mode’ Cheat Sheet for your Electrolux model. Includes an easy-to-read list of every error code and quick diagnostic tips.
✅ Join 15,000+ DIYers • Instant PDF Download
Browse More Codes
📖 View All Error Codes
Expert: Mike Sullivan
EPA Section 608 Certified Technician with 18+ years experience.
Read Editorial Standards →Browse all Electrolux error codes: Electrolux Error Codes
Leave a Reply