Category: Washer

  • How to Fix Electrolux Washer Error B3

    How to Fix Electrolux Washer Error B3

    Error Code: B3 Difficulty: Hard

    Problem: Supply voltage too low.

    How to Fix B3 Error (Step-by-Step)

    1. Unplug the washer from the electrical outlet to ensure safety.
    2. Remove the top panel of the washer by unscrewing the screws holding it in place, typically located at the back.
    3. Locate the main control board, which is usually housed in a plastic casing near the top of the machine.
    4. Carefully disconnect all the wire harnesses attached to the old control board. It’s a good idea to take a photo beforehand for reference.
    5. Remove the screws or release the clips holding the control board in its housing and take out the old board.
    6. Install the new main control board, securing it with the screws or clips, and reconnect all the wire harnesses to their correct terminals.
    7. Reattach the top panel, plug the washer back in, and run a test cycle to ensure the error is cleared and the machine functions properly.
    8. Turn the appliance off, wait about 2 minutes, then turn it back on.
    Parts Availability Note: For this Electrolux/Frigidaire error code, exact OEM part numbers can vary by model revision and serial range. We’ve listed the most likely component(s), but confirm compatibility using your full model number before ordering. If no exact SKU is shown, use this guide for diagnosis first, then verify the matching OEM part on RepairClinic or PartSelect.

    Still Not Working?
    If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.

    Browse all Electrolux error codes: Electrolux Error Codes

    When It’s Better to Replace Than Repair

    Sometimes replacing an appliance makes more financial sense than putting more money into repairs.
    Here are a few signs it may be time to shop for a new one:

    • ✓Appliance over 8-10 years old
    • ✓Repair cost over 50% of replacement
    • ✓Multiple recent breakdowns
    • ✓Major component failure

    Recommended Replacement Options

    Budget Option

    Top Rated Washers Under $600

    • Amazon’s Highest-Rated Value Models
    • Free ‘Room of Choice’ Delivery Available
    • Professional Haul-away Options at Checkout


    View Top Rated Models & Delivery Options

    Mid-Range Option

    Top Rated Washers $600 to $1,000

    • Best-Sellers with Thousands of 5-Star Reviews
    • Expert Installation & Hookup Services available
    • Protection Plans for Long-Term Peace of Mind


    View Top Rated Models & Delivery Options

    Premium Option

    Top Rated Washers Over $1,000

    • Top-of-the-Line Performance & Technology
    • White-Glove Delivery and Haul-away eligible
    • Comprehensive Warranty & Support Options


    View Top Rated Models & Delivery Options

    Why Upgrade via Amazon?

    • Fast, Scheduled Delivery – You pick the date and time
    • Expert Installation – Professional setup available for most models
    • Old Appliance Haul-away – They’ll take your broken unit when they leave
    • Easy Returns – Buy with confidence from a leader in customer service

    As an Amazon Associate, we earn from qualifying purchases.

  • How to Fix Electrolux Washer Error B2

    How to Fix Electrolux Washer Error B2

    Error Code: B2 Difficulty: Hard

    Problem: Supply voltage too high.

    How to Fix B2 Error (Step-by-Step)

    1. Disconnect the washer from the power source by unplugging it from the wall outlet. Also, turn off the water supply to the washer.
    2. Remove the top panel of the washer. This is typically secured by screws at the back or sides of the machine.
    3. Locate the main control board. It is usually housed in a plastic casing near the top of the washer.
    4. Carefully disconnect all the wire harnesses connected to the old control board. It’s a good idea to take a photo of the connections before you start, for reference.
    5. Remove the screws that hold the control board in place and carefully lift it out of the washer.
    6. Install the new main control board, securing it with the screws you just removed.
    7. Reconnect all the wire harnesses to the new board, using your photo as a guide to ensure they are in the correct positions.
    8. Reattach the top panel of the washer and secure it with its screws.
    Parts Availability Note: For this Electrolux/Frigidaire error code, exact OEM part numbers can vary by model revision and serial range. We’ve listed the most likely component(s), but confirm compatibility using your full model number before ordering. If no exact SKU is shown, use this guide for diagnosis first, then verify the matching OEM part on RepairClinic or PartSelect.

    Still Not Working?
    If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.

    Browse all Electrolux error codes: Electrolux Error Codes

    When It’s Better to Replace Than Repair

    Sometimes replacing an appliance makes more financial sense than putting more money into repairs.
    Here are a few signs it may be time to shop for a new one:

    • ✓Appliance over 8-10 years old
    • ✓Repair cost over 50% of replacement
    • ✓Multiple recent breakdowns
    • ✓Major component failure

    Recommended Replacement Options

    Budget Option

    Top Rated Washers Under $600

    • Amazon’s Highest-Rated Value Models
    • Free ‘Room of Choice’ Delivery Available
    • Professional Haul-away Options at Checkout


    View Top Rated Models & Delivery Options

    Mid-Range Option

    Top Rated Washers $600 to $1,000

    • Best-Sellers with Thousands of 5-Star Reviews
    • Expert Installation & Hookup Services available
    • Protection Plans for Long-Term Peace of Mind


    View Top Rated Models & Delivery Options

    Premium Option

    Top Rated Washers Over $1,000

    • Top-of-the-Line Performance & Technology
    • White-Glove Delivery and Haul-away eligible
    • Comprehensive Warranty & Support Options


    View Top Rated Models & Delivery Options

    Why Upgrade via Amazon?

    • Fast, Scheduled Delivery – You pick the date and time
    • Expert Installation – Professional setup available for most models
    • Old Appliance Haul-away – They’ll take your broken unit when they leave
    • Easy Returns – Buy with confidence from a leader in customer service

    As an Amazon Associate, we earn from qualifying purchases.

  • How to Fix Electrolux Washer Error B1

    How to Fix Electrolux Washer Error B1

    Error Code: B1 Difficulty: Hard

    Problem: Frequency of power out of limits.

    How to Fix B1 Error (Step-by-Step)

    1. UNPLUG THE WASHER. Safety first! Disconnect the washing machine from the wall outlet to prevent any electrical shock.
    2. ACCESS THE CONTROL BOARD. The main control board is usually located inside the top panel. You will need to remove a few screws from the back of the top panel and slide it off.
    3. DISCONNECT THE WIRES. Take a photo of the wire connections on the old control board before you disconnect anything. This will be your map for reconnecting them to the new board. Carefully unplug all the wire harnesses from the board.
    4. REMOVE THE OLD BOARD. The control board is typically held in place by plastic mounting tabs or a few screws. Gently release the tabs or unscrew the screws to free the board and lift it out.
    5. INSTALL THE NEW BOARD. Place the new control board into the same position as the old one, making sure it snaps securely into the mounting tabs or is fastened with the screws.
    6. RECONNECT THE WIRES. Using the photo you took earlier as a guide, carefully plug all the wire harnesses back into their correct ports on the new control board.
    7. REASSEMBLE AND TEST. Slide the top panel back into place and secure it with the screws. Plug the washer back in and run a test cycle to ensure everything is working correctly.
    8. Turn the appliance off, wait about 2 minutes, then turn it back on.
    Parts Availability Note: For this Electrolux/Frigidaire error code, exact OEM part numbers can vary by model revision and serial range. We’ve listed the most likely component(s), but confirm compatibility using your full model number before ordering. If no exact SKU is shown, use this guide for diagnosis first, then verify the matching OEM part on RepairClinic or PartSelect.

    Still Not Working?
    If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.

    Browse all Electrolux error codes: Electrolux Error Codes

    When It’s Better to Replace Than Repair

    Sometimes replacing an appliance makes more financial sense than putting more money into repairs.
    Here are a few signs it may be time to shop for a new one:

    • ✓Appliance over 8-10 years old
    • ✓Repair cost over 50% of replacement
    • ✓Multiple recent breakdowns
    • ✓Major component failure

    Recommended Replacement Options

    Budget Option

    Top Rated Washers Under $600

    • Amazon’s Highest-Rated Value Models
    • Free ‘Room of Choice’ Delivery Available
    • Professional Haul-away Options at Checkout


    View Top Rated Models & Delivery Options

    Mid-Range Option

    Top Rated Washers $600 to $1,000

    • Best-Sellers with Thousands of 5-Star Reviews
    • Expert Installation & Hookup Services available
    • Protection Plans for Long-Term Peace of Mind


    View Top Rated Models & Delivery Options

    Premium Option

    Top Rated Washers Over $1,000

    • Top-of-the-Line Performance & Technology
    • White-Glove Delivery and Haul-away eligible
    • Comprehensive Warranty & Support Options


    View Top Rated Models & Delivery Options

    Why Upgrade via Amazon?

    • Fast, Scheduled Delivery – You pick the date and time
    • Expert Installation – Professional setup available for most models
    • Old Appliance Haul-away – They’ll take your broken unit when they leave
    • Easy Returns – Buy with confidence from a leader in customer service

    As an Amazon Associate, we earn from qualifying purchases.

  • How to Fix Electrolux Washer Error 9E

    How to Fix Electrolux Washer Error 9E

    Error Code: 9E Difficulty: Moderate

    Problem: Touch sensor on the user interface is not responding.

    How to Fix 9E Error (Step-by-Step)

    1. Disconnect the washer from the power source to ensure safety.
    2. Remove the top panel of the washer by unscrewing the screws at the back.
    3. Locate the user interface control board, which is typically situated at the front of the washer.
    4. Carefully disconnect the wire connectors attached to the control board.
    5. Remove the screws that are holding the control board in place and then remove the old board.
    6. Install the new user interface control board (part 137007000) and secure it with the screws.
    7. Reconnect all the wire connectors, reattach the top panel, and plug the washer back in to test the new interface.
    8. Turn the appliance off, wait about 2 minutes, then turn it back on.

    Still Not Working?
    If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.

    Browse all Electrolux error codes: Electrolux Error Codes

    When It’s Better to Replace Than Repair

    Sometimes replacing an appliance makes more financial sense than putting more money into repairs.
    Here are a few signs it may be time to shop for a new one:

    • ✓Appliance over 8-10 years old
    • ✓Repair cost over 50% of replacement
    • ✓Multiple recent breakdowns
    • ✓Major component failure

    Recommended Replacement Options

    Budget Option

    Top Rated Washers Under $600

    • Amazon’s Highest-Rated Value Models
    • Free ‘Room of Choice’ Delivery Available
    • Professional Haul-away Options at Checkout


    View Top Rated Models & Delivery Options

    Mid-Range Option

    Top Rated Washers $600 to $1,000

    • Best-Sellers with Thousands of 5-Star Reviews
    • Expert Installation & Hookup Services available
    • Protection Plans for Long-Term Peace of Mind


    View Top Rated Models & Delivery Options

    Premium Option

    Top Rated Washers Over $1,000

    • Top-of-the-Line Performance & Technology
    • White-Glove Delivery and Haul-away eligible
    • Comprehensive Warranty & Support Options


    View Top Rated Models & Delivery Options

    Why Upgrade via Amazon?

    • Fast, Scheduled Delivery – You pick the date and time
    • Expert Installation – Professional setup available for most models
    • Old Appliance Haul-away – They’ll take your broken unit when they leave
    • Easy Returns – Buy with confidence from a leader in customer service

    As an Amazon Associate, we earn from qualifying purchases.

  • How to Fix Electrolux Washer Error SUDS

    How to Fix Electrolux Washer Error SUDS

    Error Code: SUDS Difficulty: Easy

    Problem: Too many suds detected.

    How to Fix SUDS Error (Step-by-Step)

    1. Pause the current wash cycle if the machine has not already stopped automatically.
    2. Do not add any more water or detergent. Allow the washer to sit for 30-60 minutes to allow the suds to break down on their own.
    3. After the waiting period, select a ‘Rinse & Spin’ or ‘Drain & Spin’ cycle to clear out the excess foam.
    4. Once the cycle is complete and the suds are gone, you can restart your laundry.
    5. To prevent this in the future, ensure you are using a High-Efficiency (HE) detergent, which is specifically designed for low-water washing machines.
    6. Measure your detergent carefully according to the manufacturer’s instructions for your load size and water hardness. Overdosing is the primary cause of excess suds.
    7. Consider using less detergent for smaller or lightly soiled loads.
    8. Turn the appliance off, wait about 2 minutes, then turn it back on.

    Still Not Working?
    If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.

    Browse all Electrolux error codes: Electrolux Error Codes

    When It’s Better to Replace Than Repair

    Sometimes replacing an appliance makes more financial sense than putting more money into repairs.
    Here are a few signs it may be time to shop for a new one:

    • ✓Appliance over 8-10 years old
    • ✓Repair cost over 50% of replacement
    • ✓Multiple recent breakdowns
    • ✓Major component failure

    Recommended Replacement Options

    Budget Option

    Top Rated Washers Under $600

    • Amazon’s Highest-Rated Value Models
    • Free ‘Room of Choice’ Delivery Available
    • Professional Haul-away Options at Checkout


    View Top Rated Models & Delivery Options

    Mid-Range Option

    Top Rated Washers $600 to $1,000

    • Best-Sellers with Thousands of 5-Star Reviews
    • Expert Installation & Hookup Services available
    • Protection Plans for Long-Term Peace of Mind


    View Top Rated Models & Delivery Options

    Premium Option

    Top Rated Washers Over $1,000

    • Top-of-the-Line Performance & Technology
    • White-Glove Delivery and Haul-away eligible
    • Comprehensive Warranty & Support Options


    View Top Rated Models & Delivery Options

    Why Upgrade via Amazon?

    • Fast, Scheduled Delivery – You pick the date and time
    • Expert Installation – Professional setup available for most models
    • Old Appliance Haul-away – They’ll take your broken unit when they leave
    • Easy Returns – Buy with confidence from a leader in customer service

    As an Amazon Associate, we earn from qualifying purchases.

  • How to Fix Electrolux Washer Error LOC

    How to Fix Electrolux Washer Error LOC

    Error Code: LOC Difficulty: Easy

    Problem: Control lock activated.

    How to Fix LOC Error (Step-by-Step)

    1. Locate the ‘Control Lock’ button on your washer’s control panel. It may be a standalone button or a secondary function of another button.
    2. Press and hold the ‘Control Lock’ button for 3 to 5 seconds.
    3. Observe the display panel; the lock symbol or ‘LOC’ message should disappear, indicating the controls are unlocked.
    4. If your model does not have a dedicated ‘Control Lock’ button, it is often a combination of two buttons that need to be pressed simultaneously.
    5. Look for two buttons with a small lock icon between or below them.
    6. Press and hold these two buttons at the same time for 3 to 5 seconds to deactivate the lock.
    7. Test the controls by attempting to select a cycle or change a setting.
    8. Turn the appliance off, wait about 2 minutes, then turn it back on.

    Still Not Working?
    If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.

    Browse all Electrolux error codes: Electrolux Error Codes

    When It’s Better to Replace Than Repair

    Sometimes replacing an appliance makes more financial sense than putting more money into repairs.
    Here are a few signs it may be time to shop for a new one:

    • ✓Appliance over 8-10 years old
    • ✓Repair cost over 50% of replacement
    • ✓Multiple recent breakdowns
    • ✓Major component failure

    Recommended Replacement Options

    Budget Option

    Top Rated Washers Under $600

    • Amazon’s Highest-Rated Value Models
    • Free ‘Room of Choice’ Delivery Available
    • Professional Haul-away Options at Checkout


    View Top Rated Models & Delivery Options

    Mid-Range Option

    Top Rated Washers $600 to $1,000

    • Best-Sellers with Thousands of 5-Star Reviews
    • Expert Installation & Hookup Services available
    • Protection Plans for Long-Term Peace of Mind


    View Top Rated Models & Delivery Options

    Premium Option

    Top Rated Washers Over $1,000

    • Top-of-the-Line Performance & Technology
    • White-Glove Delivery and Haul-away eligible
    • Comprehensive Warranty & Support Options


    View Top Rated Models & Delivery Options

    Why Upgrade via Amazon?

    • Fast, Scheduled Delivery – You pick the date and time
    • Expert Installation – Professional setup available for most models
    • Old Appliance Haul-away – They’ll take your broken unit when they leave
    • Easy Returns – Buy with confidence from a leader in customer service

    As an Amazon Associate, we earn from qualifying purchases.

  • How to Fix Electrolux Washer Error HO SE

    How to Fix Electrolux Washer Error HO SE

    Error Code: HO SE Difficulty: Easy

    Problem: Reversed hot and cold water hoses.

    How to Fix HO SE Error (Step-by-Step)

    1. Unplug the washer from the electrical outlet for safety and confirm the error stays cleared during a full test cycle.
    2. Turn off both the hot and cold water supply valves completely.
    3. Carefully unscrew the water inlet hoses from the back of the washing machine.
    4. Inspect the hose connections on the washer; they are typically color-coded, with red for hot and blue for cold.
    5. Reconnect the hose from the hot water supply to the red (hot) inlet and the hose from the cold water supply to the blue (cold) inlet.
    6. Hand-tighten the connections first, then use pliers to give them a gentle quarter-turn to ensure they are secure.
    7. Turn the water supply valves back on, plug in the washer, and run a test cycle to check for leaks.
    8. Turn the appliance off, wait about 2 minutes, then turn it back on.

    Still Not Working?
    If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.

    Browse all Electrolux error codes: Electrolux Error Codes

    When It’s Better to Replace Than Repair

    Sometimes replacing an appliance makes more financial sense than putting more money into repairs.
    Here are a few signs it may be time to shop for a new one:

    • ✓Appliance over 8-10 years old
    • ✓Repair cost over 50% of replacement
    • ✓Multiple recent breakdowns
    • ✓Major component failure

    Recommended Replacement Options

    Budget Option

    Top Rated Washers Under $600

    • Amazon’s Highest-Rated Value Models
    • Free ‘Room of Choice’ Delivery Available
    • Professional Haul-away Options at Checkout


    View Top Rated Models & Delivery Options

    Mid-Range Option

    Top Rated Washers $600 to $1,000

    • Best-Sellers with Thousands of 5-Star Reviews
    • Expert Installation & Hookup Services available
    • Protection Plans for Long-Term Peace of Mind


    View Top Rated Models & Delivery Options

    Premium Option

    Top Rated Washers Over $1,000

    • Top-of-the-Line Performance & Technology
    • White-Glove Delivery and Haul-away eligible
    • Comprehensive Warranty & Support Options


    View Top Rated Models & Delivery Options

    Why Upgrade via Amazon?

    • Fast, Scheduled Delivery – You pick the date and time
    • Expert Installation – Professional setup available for most models
    • Old Appliance Haul-away – They’ll take your broken unit when they leave
    • Easy Returns – Buy with confidence from a leader in customer service

    As an Amazon Associate, we earn from qualifying purchases.

  • How to Fix Electrolux Washer Error EF3

    How to Fix Electrolux Washer Error EF3

    Error Code: EF3 Difficulty: Easy

    Problem: Aquastop system activated.

    How to Fix EF3 Error (Step-by-Step)

    1. Immediately turn off the water supply to the washer from the wall valves.
    2. Unplug the washing machine from the electrical outlet and confirm the error stays cleared during a full test cycle.
    3. Carefully pull the washer away from the wall to inspect the water inlet hoses for any visible leaks or damage. Tighten any loose connections.
    4. Check the base of the machine for any pooled water. If water is present, it indicates a leak that has triggered the Aquastop system.
    5. Tilt the machine slightly forward to allow any water in the base pan to drain out, which should reset the Aquastop float switch.
    6. Once the area is dry and you’ve addressed any visible leaks, you can restore the power and water supply.
    7. Turn the appliance off, wait about 2 minutes, then turn it back on.

    Still Not Working?
    If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.

    Browse all Electrolux error codes: Electrolux Error Codes

    When It’s Better to Replace Than Repair

    Sometimes replacing an appliance makes more financial sense than putting more money into repairs.
    Here are a few signs it may be time to shop for a new one:

    • ✓Appliance over 8-10 years old
    • ✓Repair cost over 50% of replacement
    • ✓Multiple recent breakdowns
    • ✓Major component failure

    Recommended Replacement Options

    Budget Option

    Top Rated Washers Under $600

    • Amazon’s Highest-Rated Value Models
    • Free ‘Room of Choice’ Delivery Available
    • Professional Haul-away Options at Checkout


    View Top Rated Models & Delivery Options

    Mid-Range Option

    Top Rated Washers $600 to $1,000

    • Best-Sellers with Thousands of 5-Star Reviews
    • Expert Installation & Hookup Services available
    • Protection Plans for Long-Term Peace of Mind


    View Top Rated Models & Delivery Options

    Premium Option

    Top Rated Washers Over $1,000

    • Top-of-the-Line Performance & Technology
    • White-Glove Delivery and Haul-away eligible
    • Comprehensive Warranty & Support Options


    View Top Rated Models & Delivery Options

    Why Upgrade via Amazon?

    • Fast, Scheduled Delivery – You pick the date and time
    • Expert Installation – Professional setup available for most models
    • Old Appliance Haul-away – They’ll take your broken unit when they leave
    • Easy Returns – Buy with confidence from a leader in customer service

    As an Amazon Associate, we earn from qualifying purchases.

  • How to Fix Electrolux Washer Error EF2

    How to Fix Electrolux Washer Error EF2

    Error Code: EF2 Difficulty: Easy

    Problem: There is too much foam in the drum.

    How to Fix EF2 Error (Step-by-Step)

    1. Press the pause or cancel button to stop the current cycle.
    2. Wait for the washer to drain and the door to unlock. If it doesn’t, you may need to run a drain/spin cycle.
    3. Remove the clothes from the drum and confirm the error stays cleared during a full test cycle.
    4. Run a full wash cycle without any laundry or detergent on the hottest water setting to flush out any residual suds.
    5. For future washes, ensure you are using a high-efficiency (HE) detergent, as regular detergents produce too many suds for these machines.
    6. Measure your detergent carefully according to the manufacturer’s instructions for your load size and water hardness.
    7. If you have soft water, you will need to use significantly less detergent.
    8. Turn the appliance off, wait about 2 minutes, then turn it back on.

    Still Not Working?
    If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.

    Browse all Electrolux error codes: Electrolux Error Codes

    When It’s Better to Replace Than Repair

    Sometimes replacing an appliance makes more financial sense than putting more money into repairs.
    Here are a few signs it may be time to shop for a new one:

    • ✓Appliance over 8-10 years old
    • ✓Repair cost over 50% of replacement
    • ✓Multiple recent breakdowns
    • ✓Major component failure

    Recommended Replacement Options

    Budget Option

    Top Rated Washers Under $600

    • Amazon’s Highest-Rated Value Models
    • Free ‘Room of Choice’ Delivery Available
    • Professional Haul-away Options at Checkout


    View Top Rated Models & Delivery Options

    Mid-Range Option

    Top Rated Washers $600 to $1,000

    • Best-Sellers with Thousands of 5-Star Reviews
    • Expert Installation & Hookup Services available
    • Protection Plans for Long-Term Peace of Mind


    View Top Rated Models & Delivery Options

    Premium Option

    Top Rated Washers Over $1,000

    • Top-of-the-Line Performance & Technology
    • White-Glove Delivery and Haul-away eligible
    • Comprehensive Warranty & Support Options


    View Top Rated Models & Delivery Options

    Why Upgrade via Amazon?

    • Fast, Scheduled Delivery – You pick the date and time
    • Expert Installation – Professional setup available for most models
    • Old Appliance Haul-away – They’ll take your broken unit when they leave
    • Easy Returns – Buy with confidence from a leader in customer service

    As an Amazon Associate, we earn from qualifying purchases.

  • How to Fix Electrolux Washer Error EF0

    How to Fix Electrolux Washer Error EF0

    Error Code: EF0 Difficulty: Easy

    Problem: Water Leakage / Suds / Blocked Filter – General error for water leakage, excessive suds, or a blocked filter.

    How to Fix EF0 Error (Step-by-Step)

    1. First, cancel the current wash cycle and turn off the washer.
    2. Check around and under the washer for any signs of water leakage. If you see water, unplug the machine and soak up the water before proceeding.
    3. Locate the small door on the bottom front of the washer; this is the filter access panel. Place a shallow pan and a towel in front of it to catch any residual water.
    4. Open the panel and slowly unscrew the filter cap, allowing the water to drain into the pan. Once drained, completely remove the filter.
    5. Clean the filter of any lint, hair, or debris. Also, check the filter housing for any foreign objects and remove them.
    6. Re-insert the clean filter and screw the cap on tightly. Close the access panel.
    7. If the issue was excessive suds, run a rinse and spin cycle with no clothes or detergent to clear out the excess foam.
    8. Turn the appliance off, wait about 2 minutes, then turn it back on.

    Still Not Working?
    If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.

    Browse all Electrolux error codes: Electrolux Error Codes

    When It’s Better to Replace Than Repair

    Sometimes replacing an appliance makes more financial sense than putting more money into repairs.
    Here are a few signs it may be time to shop for a new one:

    • ✓Appliance over 8-10 years old
    • ✓Repair cost over 50% of replacement
    • ✓Multiple recent breakdowns
    • ✓Major component failure

    Recommended Replacement Options

    Budget Option

    Top Rated Washers Under $600

    • Amazon’s Highest-Rated Value Models
    • Free ‘Room of Choice’ Delivery Available
    • Professional Haul-away Options at Checkout


    View Top Rated Models & Delivery Options

    Mid-Range Option

    Top Rated Washers $600 to $1,000

    • Best-Sellers with Thousands of 5-Star Reviews
    • Expert Installation & Hookup Services available
    • Protection Plans for Long-Term Peace of Mind


    View Top Rated Models & Delivery Options

    Premium Option

    Top Rated Washers Over $1,000

    • Top-of-the-Line Performance & Technology
    • White-Glove Delivery and Haul-away eligible
    • Comprehensive Warranty & Support Options


    View Top Rated Models & Delivery Options

    Why Upgrade via Amazon?

    • Fast, Scheduled Delivery – You pick the date and time
    • Expert Installation – Professional setup available for most models
    • Old Appliance Haul-away – They’ll take your broken unit when they leave
    • Easy Returns – Buy with confidence from a leader in customer service

    As an Amazon Associate, we earn from qualifying purchases.