Category: Electrolux

  • How to Fix Electrolux Washer Error EHF

    How to Fix Electrolux Washer Error EHF

    Error Code: EHF Difficulty: Hard

    Problem: Safety system sensing circuit fault, indicating an invalid microprocessor input voltage.

    How to Fix EHF Error (Step-by-Step)

    1. Disconnect the washer from the power supply by unplugging it from the wall outlet.
    2. This error indicates a critical failure in the main control board’s safety monitoring circuit. A reset may be attempted by leaving the machine unplugged for 10-15 minutes.
    3. To replace the board, remove the top panel of the washer.
    4. Locate the main control board. Before disconnecting anything, take a clear picture of the wiring connections for reference.
    5. Carefully disconnect all wire harnesses and remove the screws securing the board to the chassis.
    6. Install the new control board, secure it with the mounting screws, and reconnect all wiring harnesses exactly as they were on the old board.
    7. Turn the appliance off, wait about 2 minutes, then turn it back on.
    Verified Compatible Alternatives:

    • 5304511966
    • 5304515626
    • 5304519503

    Still Not Working?
    If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.

    Browse all Electrolux error codes: Electrolux Error Codes

    When It’s Better to Replace Than Repair

    Sometimes replacing an appliance makes more financial sense than putting more money into repairs.
    Here are a few signs it may be time to shop for a new one:

    • ✓Appliance over 8-10 years old
    • ✓Repair cost over 50% of replacement
    • ✓Multiple recent breakdowns
    • ✓Major component failure

    Recommended Replacement Options

    Budget Option

    Top Rated Washers Under $600

    • Amazon’s Highest-Rated Value Models
    • Free ‘Room of Choice’ Delivery Available
    • Professional Haul-away Options at Checkout


    View Top Rated Models & Delivery Options

    Mid-Range Option

    Top Rated Washers $600 to $1,000

    • Best-Sellers with Thousands of 5-Star Reviews
    • Expert Installation & Hookup Services available
    • Protection Plans for Long-Term Peace of Mind


    View Top Rated Models & Delivery Options

    Premium Option

    Top Rated Washers Over $1,000

    • Top-of-the-Line Performance & Technology
    • White-Glove Delivery and Haul-away eligible
    • Comprehensive Warranty & Support Options


    View Top Rated Models & Delivery Options

    Why Upgrade via Amazon?

    • Fast, Scheduled Delivery – You pick the date and time
    • Expert Installation – Professional setup available for most models
    • Old Appliance Haul-away – They’ll take your broken unit when they leave
    • Easy Returns – Buy with confidence from a leader in customer service

    As an Amazon Associate, we earn from qualifying purchases.

  • How to Fix Electrolux Washer Error EHE

    How to Fix Electrolux Washer Error EHE

    Error Code: EHE Difficulty: Hard

    Problem: Faulty wiring or a defective Printed Circuit Board (PCB).

    How to Fix EHE Error (Step-by-Step)

    1. Disconnect the washer from the wall outlet and shut off both hot and cold water supply valves.
    2. Remove the top panel of the washer by unscrewing the screws holding it in place at the back or sides.
    3. Locate the main control board, which is typically a green circuit board housed in a plastic case.
    4. Carefully inspect all the wires and harness connections on the board. Look for any signs of burnt marks, corrosion, or loose plugs. If any connections are loose, reseat them firmly.
    5. If the wiring looks secure, proceed to replace the board. Take a photo of the wire connections for reference. Disconnect all harnesses, then release the locking tabs or remove the screws holding the board in its housing.
    6. Install the new control board, ensuring it snaps securely into place. Reconnect all the wire harnesses according to the photo you took earlier.
    7. Reattach the top panel, turn on the water supply, and plug the washer back in. Run a test cycle to confirm the error is resolved.
    8. Turn the appliance off, wait about 2 minutes, then turn it back on.
    Parts Availability Note: For this Electrolux/Frigidaire error code, exact OEM part numbers can vary by model revision and serial range. We’ve listed the most likely component(s), but confirm compatibility using your full model number before ordering. If no exact SKU is shown, use this guide for diagnosis first, then verify the matching OEM part on RepairClinic or PartSelect.

    Still Not Working?
    If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.

    Browse all Electrolux error codes: Electrolux Error Codes

    When It’s Better to Replace Than Repair

    Sometimes replacing an appliance makes more financial sense than putting more money into repairs.
    Here are a few signs it may be time to shop for a new one:

    • ✓Appliance over 8-10 years old
    • ✓Repair cost over 50% of replacement
    • ✓Multiple recent breakdowns
    • ✓Major component failure

    Recommended Replacement Options

    Budget Option

    Top Rated Washers Under $600

    • Amazon’s Highest-Rated Value Models
    • Free ‘Room of Choice’ Delivery Available
    • Professional Haul-away Options at Checkout


    View Top Rated Models & Delivery Options

    Mid-Range Option

    Top Rated Washers $600 to $1,000

    • Best-Sellers with Thousands of 5-Star Reviews
    • Expert Installation & Hookup Services available
    • Protection Plans for Long-Term Peace of Mind


    View Top Rated Models & Delivery Options

    Premium Option

    Top Rated Washers Over $1,000

    • Top-of-the-Line Performance & Technology
    • White-Glove Delivery and Haul-away eligible
    • Comprehensive Warranty & Support Options


    View Top Rated Models & Delivery Options

    Why Upgrade via Amazon?

    • Fast, Scheduled Delivery – You pick the date and time
    • Expert Installation – Professional setup available for most models
    • Old Appliance Haul-away – They’ll take your broken unit when they leave
    • Easy Returns – Buy with confidence from a leader in customer service

    As an Amazon Associate, we earn from qualifying purchases.

  • How to Fix Electrolux Washer Error EH3

    How to Fix Electrolux Washer Error EH3

    Error Code: EH3 Difficulty: Hard

    Problem: The power supply voltage is too low.

    How to Fix EH3 Error (Step-by-Step)

    1. Unplug the washer from the electrical outlet to ensure safety.
    2. Use a multimeter to test the wall outlet. It should read approximately 120V AC. If the voltage is low or there is no power, the issue is with your home’s electrical supply, and you should contact an electrician.
    3. Visually inspect the power cord for any signs of damage, fraying, or burn marks. If damage is found, the cord must be replaced.
    4. To access the main control board, remove the top panel of the washer by unscrewing the screws at the back.
    5. Carefully disconnect all wire harnesses connected to the main control board. It is helpful to take a photo before disconnecting to remember the correct placement.
    6. Remove the old control board and install the new one. Reconnect all wire harnesses to their corresponding ports on the new board.
    7. Reattach the top panel, plug the washer back in, and run a test cycle to ensure the error is cleared.
    8. Turn the appliance off, wait about 2 minutes, then turn it back on.
    Parts Availability Note: For this Electrolux/Frigidaire error code, exact OEM part numbers can vary by model revision and serial range. We’ve listed the most likely component(s), but confirm compatibility using your full model number before ordering. If no exact SKU is shown, use this guide for diagnosis first, then verify the matching OEM part on RepairClinic or PartSelect.

    Still Not Working?
    If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.

    Browse all Electrolux error codes: Electrolux Error Codes

    When It’s Better to Replace Than Repair

    Sometimes replacing an appliance makes more financial sense than putting more money into repairs.
    Here are a few signs it may be time to shop for a new one:

    • ✓Appliance over 8-10 years old
    • ✓Repair cost over 50% of replacement
    • ✓Multiple recent breakdowns
    • ✓Major component failure

    Recommended Replacement Options

    Budget Option

    Top Rated Washers Under $600

    • Amazon’s Highest-Rated Value Models
    • Free ‘Room of Choice’ Delivery Available
    • Professional Haul-away Options at Checkout


    View Top Rated Models & Delivery Options

    Mid-Range Option

    Top Rated Washers $600 to $1,000

    • Best-Sellers with Thousands of 5-Star Reviews
    • Expert Installation & Hookup Services available
    • Protection Plans for Long-Term Peace of Mind


    View Top Rated Models & Delivery Options

    Premium Option

    Top Rated Washers Over $1,000

    • Top-of-the-Line Performance & Technology
    • White-Glove Delivery and Haul-away eligible
    • Comprehensive Warranty & Support Options


    View Top Rated Models & Delivery Options

    Why Upgrade via Amazon?

    • Fast, Scheduled Delivery – You pick the date and time
    • Expert Installation – Professional setup available for most models
    • Old Appliance Haul-away – They’ll take your broken unit when they leave
    • Easy Returns – Buy with confidence from a leader in customer service

    As an Amazon Associate, we earn from qualifying purchases.

  • How to Fix Electrolux Washer Error EH2

    How to Fix Electrolux Washer Error EH2

    Error Code: EH2 Difficulty: Hard

    Problem: The power supply voltage is too high (higher than ~270V for more than 5 seconds).

    How to Fix EH2 Error (Step-by-Step)

    1. UNPLUG THE WASHER: Before any inspection, disconnect the washing machine from the power outlet to prevent electrical shock.
    2. TEST THE OUTLET VOLTAGE: This error indicates high voltage from the power supply. Use a multimeter to test the wall outlet. A standard US outlet should read between 110V and 125V. If the reading is significantly higher (e.g., above 130V), the issue is with your home’s electrical supply, not the washer.
    3. CONTACT AN ELECTRICIAN: If the outlet voltage is too high, do not proceed. Contact a qualified electrician to diagnose and repair the electrical wiring in your home. Do not plug the washer back into that outlet.
    4. INSPECT THE POWER CORD: If the outlet voltage is normal, examine the entire length of the washer’s power cord for any signs of damage, such as fraying, melting, or burn marks. A damaged cord can cause electrical issues and needs to be replaced.
    5. ACCESS AND INSPECT THE MAIN CONTROL BOARD: With the washer still unplugged, remove the top panel to access the main control board. Look for any visible signs of damage on the board, such as burn marks, blackened components, or loose wire connections.
    6. PROFESSIONAL REPLACEMENT REQUIRED: Replacing the main control board is a complex task that requires technical expertise. Due to the risk of electrical damage and personal injury, this repair should only be performed by a certified appliance service.
    7. Turn the appliance off, wait about 2 minutes, then turn it back on.
    Parts Availability Note: For this Electrolux/Frigidaire error code, exact OEM part numbers can vary by model revision and serial range. We’ve listed the most likely component(s), but confirm compatibility using your full model number before ordering. If no exact SKU is shown, use this guide for diagnosis first, then verify the matching OEM part on RepairClinic or PartSelect.

    Still Not Working?
    If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.

    Browse all Electrolux error codes: Electrolux Error Codes

    When It’s Better to Replace Than Repair

    Sometimes replacing an appliance makes more financial sense than putting more money into repairs.
    Here are a few signs it may be time to shop for a new one:

    • ✓Appliance over 8-10 years old
    • ✓Repair cost over 50% of replacement
    • ✓Multiple recent breakdowns
    • ✓Major component failure

    Recommended Replacement Options

    Budget Option

    Top Rated Washers Under $600

    • Amazon’s Highest-Rated Value Models
    • Free ‘Room of Choice’ Delivery Available
    • Professional Haul-away Options at Checkout


    View Top Rated Models & Delivery Options

    Mid-Range Option

    Top Rated Washers $600 to $1,000

    • Best-Sellers with Thousands of 5-Star Reviews
    • Expert Installation & Hookup Services available
    • Protection Plans for Long-Term Peace of Mind


    View Top Rated Models & Delivery Options

    Premium Option

    Top Rated Washers Over $1,000

    • Top-of-the-Line Performance & Technology
    • White-Glove Delivery and Haul-away eligible
    • Comprehensive Warranty & Support Options


    View Top Rated Models & Delivery Options

    Why Upgrade via Amazon?

    • Fast, Scheduled Delivery – You pick the date and time
    • Expert Installation – Professional setup available for most models
    • Old Appliance Haul-away – They’ll take your broken unit when they leave
    • Easy Returns – Buy with confidence from a leader in customer service

    As an Amazon Associate, we earn from qualifying purchases.

  • How to Fix Electrolux Washer Error EH1

    How to Fix Electrolux Washer Error EH1

    Error Code: EH1 Difficulty: Hard

    Problem: The frequency of the power supply is out of the operational range.

    How to Fix EH1 Error (Step-by-Step)

    1. Unplug the washer from its power source and confirm the error stays cleared during a full test cycle.
    2. This error indicates a problem with the incoming power. First, check that the outlet is providing the correct voltage using a multimeter.
    3. If the outlet is fine, the issue is likely with the washer’s internal power components. Remove the top panel to access the main control board and power filter board.
    4. Visually inspect the boards for any burn marks or damaged components.
    5. Carefully disconnect the wiring from the power filter and main control board.
    6. Replace the suspected faulty board, ensuring all connections are secure.
    7. Reassemble the washer, plug it in, and run a check cycle.
    8. Turn the appliance off, wait about 2 minutes, then turn it back on.
    Verified Compatible Alternatives:

    • 5304515626

    Still Not Working?
    If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.

    Browse all Electrolux error codes: Electrolux Error Codes

    When It’s Better to Replace Than Repair

    Sometimes replacing an appliance makes more financial sense than putting more money into repairs.
    Here are a few signs it may be time to shop for a new one:

    • ✓Appliance over 8-10 years old
    • ✓Repair cost over 50% of replacement
    • ✓Multiple recent breakdowns
    • ✓Major component failure

    Recommended Replacement Options

    Budget Option

    Top Rated Washers Under $600

    • Amazon’s Highest-Rated Value Models
    • Free ‘Room of Choice’ Delivery Available
    • Professional Haul-away Options at Checkout


    View Top Rated Models & Delivery Options

    Mid-Range Option

    Top Rated Washers $600 to $1,000

    • Best-Sellers with Thousands of 5-Star Reviews
    • Expert Installation & Hookup Services available
    • Protection Plans for Long-Term Peace of Mind


    View Top Rated Models & Delivery Options

    Premium Option

    Top Rated Washers Over $1,000

    • Top-of-the-Line Performance & Technology
    • White-Glove Delivery and Haul-away eligible
    • Comprehensive Warranty & Support Options


    View Top Rated Models & Delivery Options

    Why Upgrade via Amazon?

    • Fast, Scheduled Delivery – You pick the date and time
    • Expert Installation – Professional setup available for most models
    • Old Appliance Haul-away – They’ll take your broken unit when they leave
    • Easy Returns – Buy with confidence from a leader in customer service

    As an Amazon Associate, we earn from qualifying purchases.

  • How to Fix Electrolux Washer Error EH0

    How to Fix Electrolux Washer Error EH0

    Error Code: EH0 Difficulty: Hard

    Problem: Power supply problem.

    How to Fix EH0 Error (Step-by-Step)

    1. Disconnect the washer from the wall outlet and confirm the error stays cleared during a full test cycle.
    2. Check the power cord for any visible signs of damage, such as fraying or cuts. If damaged, it must be replaced.
    3. Remove the rear access panel to inspect the terminal block where the power cord connects to the washer.
    4. Ensure all connections on the terminal block are tight and there are no signs of scorching or melting.
    5. If the terminal block is damaged, disconnect the wires and remove the screws holding it in place.
    6. Install the new terminal block and securely reconnect the wires.
    7. If the power cord needs replacement, disconnect it from the terminal block and install the new cord, ensuring a secure connection.
    8. Turn the appliance off, wait about 2 minutes, then turn it back on.
    Verified Compatible Alternatives:

    • 5304515626

    Still Not Working?
    If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.

    Browse all Electrolux error codes: Electrolux Error Codes

    When It’s Better to Replace Than Repair

    Sometimes replacing an appliance makes more financial sense than putting more money into repairs.
    Here are a few signs it may be time to shop for a new one:

    • ✓Appliance over 8-10 years old
    • ✓Repair cost over 50% of replacement
    • ✓Multiple recent breakdowns
    • ✓Major component failure

    Recommended Replacement Options

    Budget Option

    Top Rated Washers Under $600

    • Amazon’s Highest-Rated Value Models
    • Free ‘Room of Choice’ Delivery Available
    • Professional Haul-away Options at Checkout


    View Top Rated Models & Delivery Options

    Mid-Range Option

    Top Rated Washers $600 to $1,000

    • Best-Sellers with Thousands of 5-Star Reviews
    • Expert Installation & Hookup Services available
    • Protection Plans for Long-Term Peace of Mind


    View Top Rated Models & Delivery Options

    Premium Option

    Top Rated Washers Over $1,000

    • Top-of-the-Line Performance & Technology
    • White-Glove Delivery and Haul-away eligible
    • Comprehensive Warranty & Support Options


    View Top Rated Models & Delivery Options

    Why Upgrade via Amazon?

    • Fast, Scheduled Delivery – You pick the date and time
    • Expert Installation – Professional setup available for most models
    • Old Appliance Haul-away – They’ll take your broken unit when they leave
    • Easy Returns – Buy with confidence from a leader in customer service

    As an Amazon Associate, we earn from qualifying purchases.

  • How to Fix Electrolux Washer Error EF5

    How to Fix Electrolux Washer Error EF5

    Error Code: EF5 Difficulty: Easy

    Problem: The load is unbalanced.

    How to Fix EF5 Error (Step-by-Step)

    1. Pause the wash cycle and confirm the error stays cleared during a full test cycle.
    2. Open the washer door and look at the clothes inside.
    3. The clothes have likely bunched up on one side of the drum, causing the imbalance.
    4. If you are washing a single large item, like a blanket, add a few smaller items like towels to help balance the load.
    5. Close the door and resume the wash cycle and confirm the error stays cleared during a full test cycle.
    6. The washer should now be able to spin without the error.
    7. Turn the appliance off, wait about 2 minutes, then turn it back on.

    Still Not Working?
    If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.

    Browse all Electrolux error codes: Electrolux Error Codes

    When It’s Better to Replace Than Repair

    Sometimes replacing an appliance makes more financial sense than putting more money into repairs.
    Here are a few signs it may be time to shop for a new one:

    • ✓Appliance over 8-10 years old
    • ✓Repair cost over 50% of replacement
    • ✓Multiple recent breakdowns
    • ✓Major component failure

    Recommended Replacement Options

    Budget Option

    Top Rated Washers Under $600

    • Amazon’s Highest-Rated Value Models
    • Free ‘Room of Choice’ Delivery Available
    • Professional Haul-away Options at Checkout


    View Top Rated Models & Delivery Options

    Mid-Range Option

    Top Rated Washers $600 to $1,000

    • Best-Sellers with Thousands of 5-Star Reviews
    • Expert Installation & Hookup Services available
    • Protection Plans for Long-Term Peace of Mind


    View Top Rated Models & Delivery Options

    Premium Option

    Top Rated Washers Over $1,000

    • Top-of-the-Line Performance & Technology
    • White-Glove Delivery and Haul-away eligible
    • Comprehensive Warranty & Support Options


    View Top Rated Models & Delivery Options

    Why Upgrade via Amazon?

    • Fast, Scheduled Delivery – You pick the date and time
    • Expert Installation – Professional setup available for most models
    • Old Appliance Haul-away – They’ll take your broken unit when they leave
    • Easy Returns – Buy with confidence from a leader in customer service

    As an Amazon Associate, we earn from qualifying purchases.

  • How to Fix Electrolux Washer Error EF4

    How to Fix Electrolux Washer Error EF4

    Error Code: EF4 Difficulty: Moderate

    Problem: No flowmeter signal.

    How to Fix EF4 Error (Step-by-Step)

    1. Shut off the water supply to the washer and unplug the appliance.
    2. The water inlet valve and flowmeter are located where the water hoses connect to the back of the washer. You may need to remove the top panel for better access.
    3. Disconnect the hoses from the inlet valve and confirm the error stays cleared during a full test cycle.
    4. Disconnect the wire harnesses from the solenoids on the valve and the flowmeter.
    5. Remove the screws holding the inlet valve assembly in place and remove it from the washer.
    6. Install the new water inlet valve and flowmeter assembly, securing it with the screws.
    7. Reconnect the hoses and wire harnesses, then turn on the water and power to test.
    8. Turn the appliance off, wait about 2 minutes, then turn it back on.
    Verified Compatible Alternatives:

    • 134371220

    Still Not Working?
    If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.

    Browse all Electrolux error codes: Electrolux Error Codes

    When It’s Better to Replace Than Repair

    Sometimes replacing an appliance makes more financial sense than putting more money into repairs.
    Here are a few signs it may be time to shop for a new one:

    • ✓Appliance over 8-10 years old
    • ✓Repair cost over 50% of replacement
    • ✓Multiple recent breakdowns
    • ✓Major component failure

    Recommended Replacement Options

    Budget Option

    Top Rated Washers Under $600

    • Amazon’s Highest-Rated Value Models
    • Free ‘Room of Choice’ Delivery Available
    • Professional Haul-away Options at Checkout


    View Top Rated Models & Delivery Options

    Mid-Range Option

    Top Rated Washers $600 to $1,000

    • Best-Sellers with Thousands of 5-Star Reviews
    • Expert Installation & Hookup Services available
    • Protection Plans for Long-Term Peace of Mind


    View Top Rated Models & Delivery Options

    Premium Option

    Top Rated Washers Over $1,000

    • Top-of-the-Line Performance & Technology
    • White-Glove Delivery and Haul-away eligible
    • Comprehensive Warranty & Support Options


    View Top Rated Models & Delivery Options

    Why Upgrade via Amazon?

    • Fast, Scheduled Delivery – You pick the date and time
    • Expert Installation – Professional setup available for most models
    • Old Appliance Haul-away – They’ll take your broken unit when they leave
    • Easy Returns – Buy with confidence from a leader in customer service

    As an Amazon Associate, we earn from qualifying purchases.

  • How to Fix Electrolux Washer Error EF1

    How to Fix Electrolux Washer Error EF1

    Error Code: EF1 Difficulty: Easy

    Problem: The drain filter is clogged.

    How to Fix EF1 Error (Step-by-Step)

    1. Unplug the washing machine and confirm the error stays cleared during a full test cycle.
    2. Locate the small access door for the drain filter, usually on the bottom front of the washer.
    3. Place a shallow pan and a towel under the access door to catch any residual water.
    4. Open the access door and slowly unscrew the filter cap, allowing the water to drain out.
    5. Once drained, completely remove the filter and clean it of any lint, hair, or debris.
    6. Also, inspect the filter housing for any obstructions and confirm the error stays cleared during a full test cycle.
    7. Screw the clean filter back in securely, close the access door, and plug the washer back in.
    8. Turn the appliance off, wait about 2 minutes, then turn it back on.
    Verified Compatible Alternatives:

    • 137221600
    • 137311900

    Still Not Working?
    If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.

    Browse all Electrolux error codes: Electrolux Error Codes

    When It’s Better to Replace Than Repair

    Sometimes replacing an appliance makes more financial sense than putting more money into repairs.
    Here are a few signs it may be time to shop for a new one:

    • ✓Appliance over 8-10 years old
    • ✓Repair cost over 50% of replacement
    • ✓Multiple recent breakdowns
    • ✓Major component failure

    Recommended Replacement Options

    Budget Option

    Top Rated Washers Under $600

    • Amazon’s Highest-Rated Value Models
    • Free ‘Room of Choice’ Delivery Available
    • Professional Haul-away Options at Checkout


    View Top Rated Models & Delivery Options

    Mid-Range Option

    Top Rated Washers $600 to $1,000

    • Best-Sellers with Thousands of 5-Star Reviews
    • Expert Installation & Hookup Services available
    • Protection Plans for Long-Term Peace of Mind


    View Top Rated Models & Delivery Options

    Premium Option

    Top Rated Washers Over $1,000

    • Top-of-the-Line Performance & Technology
    • White-Glove Delivery and Haul-away eligible
    • Comprehensive Warranty & Support Options


    View Top Rated Models & Delivery Options

    Why Upgrade via Amazon?

    • Fast, Scheduled Delivery – You pick the date and time
    • Expert Installation – Professional setup available for most models
    • Old Appliance Haul-away – They’ll take your broken unit when they leave
    • Easy Returns – Buy with confidence from a leader in customer service

    As an Amazon Associate, we earn from qualifying purchases.

  • How to Fix Electrolux Washer Error EC4

    How to Fix Electrolux Washer Error EC4

    Error Code: EC4 Difficulty: Hard

    Problem: Current sensor alarm.

    How to Fix EC4 Error (Step-by-Step)

    1. Unplug the washer from the wall outlet and turn off both hot and cold water supply valves.
    2. Remove the screws holding the top panel of the washer in place, then slide the panel off to expose the internal components.
    3. Locate the main control board, which is typically a plastic-encased circuit board with numerous wires connected to it.
    4. Take a clear photo of the wire connections on the old board to use as a reference for installation.
    5. Carefully disconnect all wire harnesses from the old control board. Most connectors have a small locking tab that needs to be pressed to release.
    6. Remove the mounting screws or release the clips holding the old control board in its housing and lift it out.
    7. Position the new control board in the same location and secure it with the mounting screws or clips.
    8. Reconnect all the wire harnesses to the new board, referring to the photo you took earlier to ensure each connector goes to the correct terminal.
    Parts Availability Note: For this Electrolux/Frigidaire error code, exact OEM part numbers can vary by model revision and serial range. We’ve listed the most likely component(s), but confirm compatibility using your full model number before ordering. If no exact SKU is shown, use this guide for diagnosis first, then verify the matching OEM part on RepairClinic or PartSelect.

    Still Not Working?
    If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.

    Browse all Electrolux error codes: Electrolux Error Codes

    When It’s Better to Replace Than Repair

    Sometimes replacing an appliance makes more financial sense than putting more money into repairs.
    Here are a few signs it may be time to shop for a new one:

    • ✓Appliance over 8-10 years old
    • ✓Repair cost over 50% of replacement
    • ✓Multiple recent breakdowns
    • ✓Major component failure

    Recommended Replacement Options

    Budget Option

    Top Rated Washers Under $600

    • Amazon’s Highest-Rated Value Models
    • Free ‘Room of Choice’ Delivery Available
    • Professional Haul-away Options at Checkout


    View Top Rated Models & Delivery Options

    Mid-Range Option

    Top Rated Washers $600 to $1,000

    • Best-Sellers with Thousands of 5-Star Reviews
    • Expert Installation & Hookup Services available
    • Protection Plans for Long-Term Peace of Mind


    View Top Rated Models & Delivery Options

    Premium Option

    Top Rated Washers Over $1,000

    • Top-of-the-Line Performance & Technology
    • White-Glove Delivery and Haul-away eligible
    • Comprehensive Warranty & Support Options


    View Top Rated Models & Delivery Options

    Why Upgrade via Amazon?

    • Fast, Scheduled Delivery – You pick the date and time
    • Expert Installation – Professional setup available for most models
    • Old Appliance Haul-away – They’ll take your broken unit when they leave
    • Easy Returns – Buy with confidence from a leader in customer service

    As an Amazon Associate, we earn from qualifying purchases.