How to Fix Electrolux Refrigerator Error SB OR SB

Written by

⚠️ Safety Warning: Appliance repair involves electricity, gas, and moving parts. Always disconnect power before working on any appliance.

Error Code: SB OR SB Difficulty: Easy

Problem: Sabbath Mode is active.

⚖️ Repair Decision

⚠️ CHECK WARRANTY / AGE

no_parts

How to Fix SB OR SB Error (Step-by-Step)

This code means the refrigerator is in Sabbath Mode, which disables lights, sounds, and the ice/water dispenser.
To exit Sabbath Mode, locate the control panel and confirm the error stays cleared during a full test cycle.
Press and hold two buttons simultaneously for 5-10 seconds. This is often the ‘Freezer Temperature Up’ and ‘Refrigerator Temperature Down’ buttons, or two buttons marked with a ‘+’ and ‘-‘.
The control panel will beep or flash, and the ‘SB’ indicator will disappear from the display.
The interior lights and dispenser functions should now be restored.
Turn the appliance off, wait about 2 minutes, then turn it back on.
Check for simple blockages (lint screen, drain path, or filter) and clean anything you find.

Still Not Working?
If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.

Appliance Type

Appliance Age

Estimated repair cost (parts, or parts + labor) Most DIY parts are $50–$250. If you have a quote, use the total.

Is it under warranty?

More options (for a better recommendation)

Brand

Your DIY Skill Level

Get the ‘Secret Service Mode’ Cheat Sheet for your Electrolux model. Includes an easy-to-read list of every error code and quick diagnostic tips.

✅ Join 15,000+ DIYers • Instant PDF Download

EPA Section 608 Certified Technician with 18+ years experience.

Browse all Electrolux error codes: Electrolux Error Codes