Category: Washer

  • How to Fix Amana Washer Error DET

    How to Fix Amana Washer Error DET

    Error Code: DET Difficulty: Easy

    Problem: Detergent cartridge not detected in the dispenser.

    How to Fix DET Error (Step-by-Step)

    1. Open the detergent dispenser drawer completely and confirm the error stays cleared during a full test cycle.
    2. Remove the detergent cartridge from the dispenser and confirm the error stays cleared during a full test cycle.
    3. Check the cartridge for any damage or blockage and confirm the error stays cleared during a full test cycle.
    4. Ensure there is no debris or obstruction in the dispenser housing where the cartridge sits.
    5. Re-insert the cartridge firmly into the dispenser until you hear it click into place.
    6. Close the dispenser drawer and try starting a new cycle.
    7. Turn the appliance off, wait about 2 minutes, then turn it back on.

    Still Not Working?
    If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.




  • How to Fix Amana Washer Error DL

    How to Fix Amana Washer Error DL

    Error Code: DL Difficulty: Moderate

    Problem: Door Lock Failure

    How to Fix DL Error (Step-by-Step)

    1. Disconnect the washer from its power source and confirm the error stays cleared during a full test cycle.
    2. Open the washer lid. You may need to use a putty knife to release the clips holding the top panel down.
    3. Locate the lid lock assembly on the underside of the top panel.
    4. Disconnect the wire harness connected to the lid lock and confirm the error stays cleared during a full test cycle.
    5. Remove the screws that secure the old lid lock assembly to the washer’s top.
    6. Install the new lid lock assembly, making sure it is properly aligned, and secure it with the screws.
    7. Reconnect the wire harness, lower the top panel, and restore power to the washer.
    8. Turn the appliance off, wait about 2 minutes, then turn it back on.

    Verified Compatible Alternatives:

    • W10838613 (Lid Lock Assembly)
    • W11307244 (Lid Lock Assembly)

    Still Not Working?
    If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.




  • How to Fix Amana Washer Error DU

    How to Fix Amana Washer Error DU

    Error Code: DU Difficulty: Easy

    Problem: Door Unlock Failure

    How to Fix DU Error (Step-by-Step)

    1. Press the ‘Pause’ or ‘Cancel’ button to try and unlock the door.
    2. Wait for 5-10 minutes, as the washer may have a time-delay feature for safety.
    3. If the door remains locked, unplug the washer from the power outlet for at least 5 minutes.
    4. Plug the washer back in. This power cycle may reset the control board and release the lock.
    5. Check for any clothing items that might be caught in the door latch, preventing it from opening.
    6. Try running a ‘Drain & Spin’ cycle to see if completing a cycle will unlock the door.
    7. Turn the appliance off, wait about 2 minutes, then turn it back on.

    Still Not Working?
    If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.




  • How to Fix Amana Washer Error DRN

    How to Fix Amana Washer Error DRN

    Error Code: DRN Difficulty: Hard

    Problem: Drain Error

    How to Fix DRN Error (Step-by-Step)

    1. Unplug the washer from the power outlet and confirm the error stays cleared during a full test cycle.
    2. Place towels on the floor and have a shallow pan or bucket ready to catch water.
    3. Locate the drain pump, usually accessible through the front lower panel or by tilting the machine.
    4. Disconnect the hoses from the pump, allowing any trapped water to drain into your pan.
    5. Disconnect the electrical wires from the pump and confirm the error stays cleared during a full test cycle.
    6. Remove the screws or release the tabs holding the old pump in place and remove it.
    7. Install the new drain pump, reconnect the hoses and wires, and secure the access panel before restoring power.
    8. Turn the appliance off, wait about 2 minutes, then turn it back on.

    Verified Compatible Alternatives:

    • W10919003 (Drain Pump)
    • WPW10730972 (Drain Pump)

    Still Not Working?
    If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.




  • How to Fix Amana Washer Error OL

    How to Fix Amana Washer Error OL

    Error Code: OL Difficulty: Easy

    Problem: Overload

    How to Fix OL Error (Step-by-Step)

    1. Press the ‘Pause’ or ‘Cancel’ button to stop the cycle.
    2. Open the washer lid and remove several items to reduce the weight of the load.
    3. Redistribute the remaining clothes evenly around the wash plate or agitator.
    4. Ensure the load is balanced and not clumped to one side.
    5. Close the lid and restart the cycle and confirm the error stays cleared during a full test cycle.
    6. For future loads, avoid washing single heavy items and ensure you don’t pack the washer too tightly.
    7. Turn the appliance off, wait about 2 minutes, then turn it back on.

    Still Not Working?
    If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.




  • How to Fix Amana Washer Error RL

    How to Fix Amana Washer Error RL

    Error Code: RL Difficulty: Easy

    Problem: Items detected in the washer during the Clean Washer cycle.

    How to Fix RL Error (Step-by-Step)

    1. Press the ‘Pause’ or ‘Cancel’ button to stop the Clean Washer cycle.
    2. Wait for the lid to unlock, which may take a moment.
    3. Open the washer lid and look inside the drum and confirm the error stays cleared during a full test cycle.
    4. Remove any clothing, towels, or other items that were left inside.
    5. Close the lid securely and confirm the error stays cleared during a full test cycle.
    6. Select the ‘Clean Washer’ cycle again and confirm the error stays cleared during a full test cycle.
    7. Press the ‘Start’ button to run the cycle with a completely empty drum.
    8. Turn the appliance off, wait about 2 minutes, then turn it back on.

    Still Not Working?
    If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.




  • How to Fix Amana Washer Error UL

    How to Fix Amana Washer Error UL

    Error Code: UL Difficulty: Easy

    Problem: Unbalanced Load

    How to Fix UL Error (Step-by-Step)

    1. The washer has paused automatically. Press the ‘Pause’ or ‘Cancel’ button to ensure the cycle is stopped.
    2. Wait for the spinning to stop completely and for the lid to unlock.
    3. Open the lid and observe the clothes inside. They are likely gathered on one side of the drum.
    4. If washing one large or absorbent item, add a couple of towels to help balance the weight.
    5. Close the lid firmly and confirm the error stays cleared during a full test cycle.
    6. Press the ‘Start’ button to resume the cycle. The washer will attempt to spin again.
    7. Turn the appliance off, wait about 2 minutes, then turn it back on.

    Still Not Working?
    If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.