Category: Washer

How to Fix Electrolux Washer Error F17
Error Code: F17 Difficulty: Hard

Problem: Overheating fault with the dryer part (in washer-dryer models).

How to Fix F17 Error (Step-by-Step)
1. Unplug the washer-dryer from the power source and confirm the error stays cleared during a full test cycle.
2. Check the dryer vent hose at the back of the machine and where it exits your home. Ensure it is not crushed, kinked, or clogged with lint.
3. Remove the top or front panel to access the dryer components.
4. Locate the high-limit thermostat and the thermistor on the heating element housing or blower housing.
5. Use a multimeter to test both the high-limit thermostat and the thermistor for continuity. A lack of continuity indicates the part has failed and needs replacement.
6. Inspect the heating element for any visible breaks or damage. Test it for continuity as well.
7. If components test okay, the issue could be with the main control board not receiving the correct signals, which may require professional service.
8. Turn the appliance off, wait about 2 minutes, then turn it back on.
Verified Compatible Alternatives:
- 808455304
- A03648203
- 5304505231
Still Not Working?
If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.

Browse all Electrolux error codes: Electrolux Error Codes
When It’s Better to Replace Than Repair

Sometimes replacing an appliance makes more financial sense than putting more money into repairs.
Here are a few signs it may be time to shop for a new one:
- ✓Appliance over 8-10 years old
- ✓Repair cost over 50% of replacement
- ✓Multiple recent breakdowns
- ✓Major component failure
Recommended Replacement Options
Budget Option

Top Rated Washers Under $600

Amazon’s Highest-Rated Value Models

Free ‘Room of Choice’ Delivery Available

Professional Haul-away Options at Checkout

View Top Rated Models & Delivery Options

Mid-Range Option

Top Rated Washers $600 to $1,000

Best-Sellers with Thousands of 5-Star Reviews

Expert Installation & Hookup Services available

Protection Plans for Long-Term Peace of Mind

View Top Rated Models & Delivery Options

Premium Option

Top Rated Washers Over $1,000

Top-of-the-Line Performance & Technology

White-Glove Delivery and Haul-away eligible

Comprehensive Warranty & Support Options

View Top Rated Models & Delivery Options
Why Upgrade via Amazon?

Fast, Scheduled Delivery – You pick the date and time

Expert Installation – Professional setup available for most models

Old Appliance Haul-away – They’ll take your broken unit when they leave

Easy Returns – Buy with confidence from a leader in customer service
As an Amazon Associate, we earn from qualifying purchases.
May 5, 2026
How to Fix Electrolux Washer Error F12
Error Code: F12 Difficulty: Hard

Problem: Communication fault between the touch control board and the main control board.

How to Fix F12 Error (Step-by-Step)
1. Disconnect the washer from the electrical outlet and confirm the error stays cleared during a full test cycle.
2. Remove the top panel to get access to the main control board and the control panel assembly.
3. Locate the main control board (often in a plastic housing) and the touch control board at the front of the unit.
4. Examine the wire harness that links the main control board to the touch control board.
5. Check for any pinched wires, loose connections, or damage to the harness. Unplug and securely plug back in the connectors on both boards.
6. Visually inspect both control boards for any burn marks or visible damage that could indicate a failure.
7. If the connections are secure and no damage is visible, a faulty main control board or touch control is likely, which typically requires professional replacement.
8. Turn the appliance off, wait about 2 minutes, then turn it back on.
Verified Compatible Alternatives:
- 134371220
- 134762010
- 137353500
Still Not Working?
If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.

Browse all Electrolux error codes: Electrolux Error Codes
When It’s Better to Replace Than Repair

Sometimes replacing an appliance makes more financial sense than putting more money into repairs.
Here are a few signs it may be time to shop for a new one:
- ✓Appliance over 8-10 years old
- ✓Repair cost over 50% of replacement
- ✓Multiple recent breakdowns
- ✓Major component failure
Recommended Replacement Options
Budget Option

Top Rated Washers Under $600

Amazon’s Highest-Rated Value Models

Free ‘Room of Choice’ Delivery Available

Professional Haul-away Options at Checkout

View Top Rated Models & Delivery Options

Mid-Range Option

Top Rated Washers $600 to $1,000

Best-Sellers with Thousands of 5-Star Reviews

Expert Installation & Hookup Services available

Protection Plans for Long-Term Peace of Mind

View Top Rated Models & Delivery Options

Premium Option

Top Rated Washers Over $1,000

Top-of-the-Line Performance & Technology

White-Glove Delivery and Haul-away eligible

Comprehensive Warranty & Support Options

View Top Rated Models & Delivery Options
Why Upgrade via Amazon?

Fast, Scheduled Delivery – You pick the date and time

Expert Installation – Professional setup available for most models

Old Appliance Haul-away – They’ll take your broken unit when they leave

Easy Returns – Buy with confidence from a leader in customer service
As an Amazon Associate, we earn from qualifying purchases.
May 5, 2026
How to Fix Electrolux Washer Error F11
Error Code: F11 Difficulty: Hard

Problem: Communication error between the Central Control Unit (CCU) and the Motor Control Unit (MCU).

How to Fix F11 Error (Step-by-Step)
1. Unplug the washer from the power outlet to ensure safety.
2. Remove the top panel of the washer to access the internal components.
3. Locate the Central Control Unit (CCU) and the Motor Control Unit (MCU). The MCU is typically located at the bottom of the washer near the motor.
4. Carefully inspect the wiring harness that connects the CCU and the MCU. Look for any loose plugs, broken wires, or signs of corrosion on the connectors.
5. Disconnect and then firmly reconnect the wiring harness at both the CCU and MCU ends to ensure a secure connection.
6. If the wiring appears intact, the issue may be with one of the control boards. This step often requires a professional diagnosis to determine which board has failed.
7. After checking connections or replacing a board, reassemble the washer, plug it in, and run a test cycle.
8. Turn the appliance off, wait about 2 minutes, then turn it back on.
Verified Compatible Alternatives:
- 134211400
- 134371220
- 134959340
Still Not Working?
If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.

Browse all Electrolux error codes: Electrolux Error Codes
When It’s Better to Replace Than Repair

Sometimes replacing an appliance makes more financial sense than putting more money into repairs.
Here are a few signs it may be time to shop for a new one:
- ✓Appliance over 8-10 years old
- ✓Repair cost over 50% of replacement
- ✓Multiple recent breakdowns
- ✓Major component failure
Recommended Replacement Options
Budget Option

Top Rated Washers Under $600

Amazon’s Highest-Rated Value Models

Free ‘Room of Choice’ Delivery Available

Professional Haul-away Options at Checkout

View Top Rated Models & Delivery Options

Mid-Range Option

Top Rated Washers $600 to $1,000

Best-Sellers with Thousands of 5-Star Reviews

Expert Installation & Hookup Services available

Protection Plans for Long-Term Peace of Mind

View Top Rated Models & Delivery Options

Premium Option

Top Rated Washers Over $1,000

Top-of-the-Line Performance & Technology

White-Glove Delivery and Haul-away eligible

Comprehensive Warranty & Support Options

View Top Rated Models & Delivery Options
Why Upgrade via Amazon?

Fast, Scheduled Delivery – You pick the date and time

Expert Installation – Professional setup available for most models

Old Appliance Haul-away – They’ll take your broken unit when they leave

Easy Returns – Buy with confidence from a leader in customer service
As an Amazon Associate, we earn from qualifying purchases.
May 5, 2026
How to Fix Electrolux Washer Error F1
Error Code: F1 Difficulty: Hard

Problem: Internal fault in the control.

How to Fix F1 Error (Step-by-Step)
1. First, attempt a hard reset of the machine’s electronics. Unplug the washer from the wall outlet.
2. Wait for at least 5 minutes to allow the internal capacitors in the control board to fully discharge.
3. Plug the washer back into the power outlet and confirm the error stays cleared during a full test cycle.
4. To replace the board, unplug the machine again and remove the top panel.
5. Locate the main control board, disconnect its wire harnesses, and remove it from its mounting.
6. Install the new control board, reconnect the wires, and reassemble the washer.
7. Turn the appliance off, wait about 2 minutes, then turn it back on.
Verified Compatible Alternatives:
- 134762010
- 5304505436
Still Not Working?
If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.

Browse all Electrolux error codes: Electrolux Error Codes
When It’s Better to Replace Than Repair

Sometimes replacing an appliance makes more financial sense than putting more money into repairs.
Here are a few signs it may be time to shop for a new one:
- ✓Appliance over 8-10 years old
- ✓Repair cost over 50% of replacement
- ✓Multiple recent breakdowns
- ✓Major component failure
Recommended Replacement Options
Budget Option

Top Rated Washers Under $600

Amazon’s Highest-Rated Value Models

Free ‘Room of Choice’ Delivery Available

Professional Haul-away Options at Checkout

View Top Rated Models & Delivery Options

Mid-Range Option

Top Rated Washers $600 to $1,000

Best-Sellers with Thousands of 5-Star Reviews

Expert Installation & Hookup Services available

Protection Plans for Long-Term Peace of Mind

View Top Rated Models & Delivery Options

Premium Option

Top Rated Washers Over $1,000

Top-of-the-Line Performance & Technology

White-Glove Delivery and Haul-away eligible

Comprehensive Warranty & Support Options

View Top Rated Models & Delivery Options
Why Upgrade via Amazon?

Fast, Scheduled Delivery – You pick the date and time

Expert Installation – Professional setup available for most models

Old Appliance Haul-away – They’ll take your broken unit when they leave

Easy Returns – Buy with confidence from a leader in customer service
As an Amazon Associate, we earn from qualifying purchases.
May 5, 2026
How to Fix Electrolux Washer Error END
Error Code: END Difficulty: Easy

Problem: The wash cycle has finished.

How to Fix END Error (Step-by-Step)
1. This is an informational message, not an error code and confirm the error stays cleared during a full test cycle.
2. The ‘END’ message simply means that the wash cycle you selected has finished.
3. The washer will typically chime or beep to alert you that the cycle is complete.
4. You can now safely open the washer door and remove your clean laundry.
5. To clear the message, press the ‘Power’ button or turn the main cycle selector dial to the ‘Off’ position.
6. Turn the appliance off, wait about 2 minutes, then turn it back on.
7. Check for simple blockages (lint screen, drain path, or filter) and clean anything you find.
Still Not Working?
If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.

Browse all Electrolux error codes: Electrolux Error Codes
When It’s Better to Replace Than Repair

Sometimes replacing an appliance makes more financial sense than putting more money into repairs.
Here are a few signs it may be time to shop for a new one:
- ✓Appliance over 8-10 years old
- ✓Repair cost over 50% of replacement
- ✓Multiple recent breakdowns
- ✓Major component failure
Recommended Replacement Options
Budget Option

Top Rated Washers Under $600

Amazon’s Highest-Rated Value Models

Free ‘Room of Choice’ Delivery Available

Professional Haul-away Options at Checkout

View Top Rated Models & Delivery Options

Mid-Range Option

Top Rated Washers $600 to $1,000

Best-Sellers with Thousands of 5-Star Reviews

Expert Installation & Hookup Services available

Protection Plans for Long-Term Peace of Mind

View Top Rated Models & Delivery Options

Premium Option

Top Rated Washers Over $1,000

Top-of-the-Line Performance & Technology

White-Glove Delivery and Haul-away eligible

Comprehensive Warranty & Support Options

View Top Rated Models & Delivery Options
Why Upgrade via Amazon?

Fast, Scheduled Delivery – You pick the date and time

Expert Installation – Professional setup available for most models

Old Appliance Haul-away – They’ll take your broken unit when they leave

Easy Returns – Buy with confidence from a leader in customer service
As an Amazon Associate, we earn from qualifying purchases.
May 5, 2026
How to Fix Electrolux Washer Error EDR
Error Code: EDR Difficulty: Easy

Problem: Appears in demo mode.

How to Fix EDR Error (Step-by-Step)
1. This code indicates the washer is in ‘Demo’ or ‘Showroom’ mode, which disables normal washing functions.
2. To exit this mode, locate the ‘Temp’ and ‘Spin’ buttons on the control panel.
3. Press and hold both the ‘Temp’ and ‘Spin’ buttons at the same time.
4. Continue to hold the buttons for approximately 5 to 10 seconds.
5. The display should change, or you may hear a beep, signaling that the washer has exited demo mode.
6. Release the buttons and try to start a normal wash cycle to confirm the washer is now functioning correctly.
7. Turn the appliance off, wait about 2 minutes, then turn it back on.
Still Not Working?
If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.

Browse all Electrolux error codes: Electrolux Error Codes
When It’s Better to Replace Than Repair

Sometimes replacing an appliance makes more financial sense than putting more money into repairs.
Here are a few signs it may be time to shop for a new one:
- ✓Appliance over 8-10 years old
- ✓Repair cost over 50% of replacement
- ✓Multiple recent breakdowns
- ✓Major component failure
Recommended Replacement Options
Budget Option

Top Rated Washers Under $600

Amazon’s Highest-Rated Value Models

Free ‘Room of Choice’ Delivery Available

Professional Haul-away Options at Checkout

View Top Rated Models & Delivery Options

Mid-Range Option

Top Rated Washers $600 to $1,000

Best-Sellers with Thousands of 5-Star Reviews

Expert Installation & Hookup Services available

Protection Plans for Long-Term Peace of Mind

View Top Rated Models & Delivery Options

Premium Option

Top Rated Washers Over $1,000

Top-of-the-Line Performance & Technology

White-Glove Delivery and Haul-away eligible

Comprehensive Warranty & Support Options

View Top Rated Models & Delivery Options
Why Upgrade via Amazon?

Fast, Scheduled Delivery – You pick the date and time

Expert Installation – Professional setup available for most models

Old Appliance Haul-away – They’ll take your broken unit when they leave

Easy Returns – Buy with confidence from a leader in customer service
As an Amazon Associate, we earn from qualifying purchases.
May 5, 2026
How to Fix Electrolux Washer Error EB0
Error Code: EB0 Difficulty: Hard

Problem: Problems with too low voltage of the power supply.

How to Fix EB0 Error (Step-by-Step)
1. Unplug the washing machine from its power source to prevent electrical shock.
2. Verify that the washer is on a dedicated electrical circuit and is not sharing power with other major appliances, which can cause voltage to drop when the washer is in use.
3. Remove any extension cords and plug the washer directly into the wall outlet.
4. Access the main control board by taking off the top panel of the washer.
5. Inspect the main wire harness connection at the control board. Ensure it is fully seated and that there are no visible signs of damage or corrosion on the pins or wires.
6. If the connections are good, the control board’s voltage sensing circuit is likely faulty. The board will need to be replaced to resolve the error.
7. Turn the appliance off, wait about 2 minutes, then turn it back on.
Verified Compatible Alternatives:
- 137011400
- A03415902
- 5304490721
Still Not Working?
If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.

Browse all Electrolux error codes: Electrolux Error Codes
When It’s Better to Replace Than Repair

Sometimes replacing an appliance makes more financial sense than putting more money into repairs.
Here are a few signs it may be time to shop for a new one:
- ✓Appliance over 8-10 years old
- ✓Repair cost over 50% of replacement
- ✓Multiple recent breakdowns
- ✓Major component failure
Recommended Replacement Options
Budget Option

Top Rated Washers Under $600

Amazon’s Highest-Rated Value Models

Free ‘Room of Choice’ Delivery Available

Professional Haul-away Options at Checkout

View Top Rated Models & Delivery Options

Mid-Range Option

Top Rated Washers $600 to $1,000

Best-Sellers with Thousands of 5-Star Reviews

Expert Installation & Hookup Services available

Protection Plans for Long-Term Peace of Mind

View Top Rated Models & Delivery Options

Premium Option

Top Rated Washers Over $1,000

Top-of-the-Line Performance & Technology

White-Glove Delivery and Haul-away eligible

Comprehensive Warranty & Support Options

View Top Rated Models & Delivery Options
Why Upgrade via Amazon?

Fast, Scheduled Delivery – You pick the date and time

Expert Installation – Professional setup available for most models

Old Appliance Haul-away – They’ll take your broken unit when they leave

Easy Returns – Buy with confidence from a leader in customer service
As an Amazon Associate, we earn from qualifying purchases.
May 5, 2026
How to Fix Electrolux Washer Error EHF
Error Code: EHF Difficulty: Hard

Problem: Safety system sensing circuit fault, indicating an invalid microprocessor input voltage.

How to Fix EHF Error (Step-by-Step)
1. Disconnect the washer from the power supply by unplugging it from the wall outlet.
2. This error indicates a critical failure in the main control board’s safety monitoring circuit. A reset may be attempted by leaving the machine unplugged for 10-15 minutes.
3. To replace the board, remove the top panel of the washer.
4. Locate the main control board. Before disconnecting anything, take a clear picture of the wiring connections for reference.
5. Carefully disconnect all wire harnesses and remove the screws securing the board to the chassis.
6. Install the new control board, secure it with the mounting screws, and reconnect all wiring harnesses exactly as they were on the old board.
7. Turn the appliance off, wait about 2 minutes, then turn it back on.
Verified Compatible Alternatives:
- 5304511966
- 5304515626
- 5304519503
Still Not Working?
If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.

Browse all Electrolux error codes: Electrolux Error Codes
When It’s Better to Replace Than Repair

Sometimes replacing an appliance makes more financial sense than putting more money into repairs.
Here are a few signs it may be time to shop for a new one:
- ✓Appliance over 8-10 years old
- ✓Repair cost over 50% of replacement
- ✓Multiple recent breakdowns
- ✓Major component failure
Recommended Replacement Options
Budget Option

Top Rated Washers Under $600

Amazon’s Highest-Rated Value Models

Free ‘Room of Choice’ Delivery Available

Professional Haul-away Options at Checkout

View Top Rated Models & Delivery Options

Mid-Range Option

Top Rated Washers $600 to $1,000

Best-Sellers with Thousands of 5-Star Reviews

Expert Installation & Hookup Services available

Protection Plans for Long-Term Peace of Mind

View Top Rated Models & Delivery Options

Premium Option

Top Rated Washers Over $1,000

Top-of-the-Line Performance & Technology

White-Glove Delivery and Haul-away eligible

Comprehensive Warranty & Support Options

View Top Rated Models & Delivery Options
Why Upgrade via Amazon?

Fast, Scheduled Delivery – You pick the date and time

Expert Installation – Professional setup available for most models

Old Appliance Haul-away – They’ll take your broken unit when they leave

Easy Returns – Buy with confidence from a leader in customer service
As an Amazon Associate, we earn from qualifying purchases.
May 5, 2026
How to Fix Electrolux Washer Error EHE
Error Code: EHE Difficulty: Hard

Problem: Faulty wiring or a defective Printed Circuit Board (PCB).

How to Fix EHE Error (Step-by-Step)
1. Disconnect the washer from the wall outlet and shut off both hot and cold water supply valves.
2. Remove the top panel of the washer by unscrewing the screws holding it in place at the back or sides.
3. Locate the main control board, which is typically a green circuit board housed in a plastic case.
4. Carefully inspect all the wires and harness connections on the board. Look for any signs of burnt marks, corrosion, or loose plugs. If any connections are loose, reseat them firmly.
5. If the wiring looks secure, proceed to replace the board. Take a photo of the wire connections for reference. Disconnect all harnesses, then release the locking tabs or remove the screws holding the board in its housing.
6. Install the new control board, ensuring it snaps securely into place. Reconnect all the wire harnesses according to the photo you took earlier.
7. Reattach the top panel, turn on the water supply, and plug the washer back in. Run a test cycle to confirm the error is resolved.
8. Turn the appliance off, wait about 2 minutes, then turn it back on.
Parts Availability Note: For this Electrolux/Frigidaire error code, exact OEM part numbers can vary by model revision and serial range. We’ve listed the most likely component(s), but confirm compatibility using your full model number before ordering. If no exact SKU is shown, use this guide for diagnosis first, then verify the matching OEM part on RepairClinic or PartSelect.

Still Not Working?
If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.

Browse all Electrolux error codes: Electrolux Error Codes
When It’s Better to Replace Than Repair

Sometimes replacing an appliance makes more financial sense than putting more money into repairs.
Here are a few signs it may be time to shop for a new one:
- ✓Appliance over 8-10 years old
- ✓Repair cost over 50% of replacement
- ✓Multiple recent breakdowns
- ✓Major component failure
Recommended Replacement Options
Budget Option

Top Rated Washers Under $600

Amazon’s Highest-Rated Value Models

Free ‘Room of Choice’ Delivery Available

Professional Haul-away Options at Checkout

View Top Rated Models & Delivery Options

Mid-Range Option

Top Rated Washers $600 to $1,000

Best-Sellers with Thousands of 5-Star Reviews

Expert Installation & Hookup Services available

Protection Plans for Long-Term Peace of Mind

View Top Rated Models & Delivery Options

Premium Option

Top Rated Washers Over $1,000

Top-of-the-Line Performance & Technology

White-Glove Delivery and Haul-away eligible

Comprehensive Warranty & Support Options

View Top Rated Models & Delivery Options
Why Upgrade via Amazon?

Fast, Scheduled Delivery – You pick the date and time

Expert Installation – Professional setup available for most models

Old Appliance Haul-away – They’ll take your broken unit when they leave

Easy Returns – Buy with confidence from a leader in customer service
As an Amazon Associate, we earn from qualifying purchases.
May 5, 2026
How to Fix Electrolux Washer Error EH3
Error Code: EH3 Difficulty: Hard

Problem: The power supply voltage is too low.

How to Fix EH3 Error (Step-by-Step)
1. Unplug the washer from the electrical outlet to ensure safety.
2. Use a multimeter to test the wall outlet. It should read approximately 120V AC. If the voltage is low or there is no power, the issue is with your home’s electrical supply, and you should contact an electrician.
3. Visually inspect the power cord for any signs of damage, fraying, or burn marks. If damage is found, the cord must be replaced.
4. To access the main control board, remove the top panel of the washer by unscrewing the screws at the back.
5. Carefully disconnect all wire harnesses connected to the main control board. It is helpful to take a photo before disconnecting to remember the correct placement.
6. Remove the old control board and install the new one. Reconnect all wire harnesses to their corresponding ports on the new board.
7. Reattach the top panel, plug the washer back in, and run a test cycle to ensure the error is cleared.
8. Turn the appliance off, wait about 2 minutes, then turn it back on.
Parts Availability Note: For this Electrolux/Frigidaire error code, exact OEM part numbers can vary by model revision and serial range. We’ve listed the most likely component(s), but confirm compatibility using your full model number before ordering. If no exact SKU is shown, use this guide for diagnosis first, then verify the matching OEM part on RepairClinic or PartSelect.

Still Not Working?
If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.

Browse all Electrolux error codes: Electrolux Error Codes
When It’s Better to Replace Than Repair

Sometimes replacing an appliance makes more financial sense than putting more money into repairs.
Here are a few signs it may be time to shop for a new one:
- ✓Appliance over 8-10 years old
- ✓Repair cost over 50% of replacement
- ✓Multiple recent breakdowns
- ✓Major component failure
Recommended Replacement Options
Budget Option

Top Rated Washers Under $600

Amazon’s Highest-Rated Value Models

Free ‘Room of Choice’ Delivery Available

Professional Haul-away Options at Checkout

View Top Rated Models & Delivery Options

Mid-Range Option

Top Rated Washers $600 to $1,000

Best-Sellers with Thousands of 5-Star Reviews

Expert Installation & Hookup Services available

Protection Plans for Long-Term Peace of Mind

View Top Rated Models & Delivery Options

Premium Option

Top Rated Washers Over $1,000

Top-of-the-Line Performance & Technology

White-Glove Delivery and Haul-away eligible

Comprehensive Warranty & Support Options

View Top Rated Models & Delivery Options
Why Upgrade via Amazon?

Fast, Scheduled Delivery – You pick the date and time

Expert Installation – Professional setup available for most models

Old Appliance Haul-away – They’ll take your broken unit when they leave

Easy Returns – Buy with confidence from a leader in customer service
As an Amazon Associate, we earn from qualifying purchases.
May 5, 2026