Error Code: FILL OR SENSING LIGHT ON Difficulty: Moderate
Problem: Filling or Sensing
How to Fix FILL OR SENSING LIGHT ON Error (Step-by-Step)
- Unplug the washer from the wall outlet to ensure safety.
- Turn off both the hot and cold water supply valves connected to the washer.
- Open the washer lid and check that the lid switch, a small plastic piece on the body that meets the lid, is not broken or obstructed.
- Carefully pull the washer away from the wall to access the back panel.
- Unscrew the mounting screws holding the top control panel in place and flip it back to access the lid switch and water valve connections.
- Inspect the wire harness connecting to the lid switch and the water inlet valve for any loose or damaged wires.
- If the wiring is secure and the lid switch appears damaged, it will need to be replaced to allow the washer to sense the lid is closed and begin the fill cycle.
- Turn the appliance off, wait about 2 minutes, then turn it back on.
What to Check Next on This Amana Washer
Focused repair path: washer fill, drain, spin, lock, pressure, motor, sensor, and control checks. Do not treat a returning fault as a reset-only problem; use the point in the cycle where the fault appears to choose the next check.
- Unplug the washer for one minute, then restart only to confirm whether the same code returns after a clean power cycle.
- Check load balance, detergent level, supply valves, inlet screens, drain hose height, and the drain path before replacing electronic parts.
- Inspect the lid or door lock, strike, harness, and connector if the symptom involves start, lock, or spin behavior.
- Match the timing of the fault to the likely part path: inlet valve, pressure sensor, drain pump, motor, lock assembly, wiring, or control.
Check, inspect, clean, test, measure, remove, reconnect, clear, and replace parts only when the symptom supports that path. If these checks point toward a part, verify the complete Amana model number from the appliance tag before ordering. Similar error wording can use different valves, sensors, pumps, motors, heaters, locks, switches, fans, or control boards depending on the exact model.
- W10838613 (Lid Switch)
- WP8318084 (Lid Switch)
- 205613 (Water Inlet Valve)
Recommended Parts to Check
No exact official OEM part number is listed here because the correct Amana washer part can vary by complete model number. These are targeted part-category searches, not universal fit claims.
-
Whirlpool washer drain pumpCommon replacement category: Drain pumpFit note: Exact OEM part number varies by complete Amana washer model number. Confirm compatibility before buying.Why this category can matter: drain, no-spin, or water-removal symptoms after hose and filter checks.
-
Whirlpool washer water inlet valveCommon replacement category: Water inlet valveFit note: Exact OEM part number varies by complete Amana washer model number. Confirm compatibility before buying.Why this category can matter: fill, slow-fill, and valve-related symptoms after supply checks.
-
Whirlpool washer control boardCommon replacement category: Main control boardFit note: Exact OEM part number varies by complete Amana washer model number. Confirm compatibility before buying.Why this category can matter: repeating control or communication faults after connector checks.
Before ordering: match the part to the complete Amana washer model number on the appliance tag.
Still Not Working?
If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.
When It’s Better to Replace Than Repair
Sometimes replacing an appliance makes more financial sense than putting more money into repairs.
Here are a few signs it may be time to shop for a new one:
For repair parts, verify exact fit with the full washer model number before buying; these links are general replacement-appliance shopping options.
- ✓Appliance over 8-10 years old
- ✓Repair cost over 50% of replacement
- ✓Multiple recent breakdowns
- ✓Major component failure
Recommended Replacement Options
Why Upgrade via Amazon?
- Fast, Scheduled Delivery – You pick the date and time
- Expert Installation – Professional setup available for most models
- Old Appliance Haul-away – They’ll take your broken unit when they leave
- Easy Returns – Buy with confidence from a leader in customer service
As an Amazon Associate, we earn from qualifying purchases.
