How to Fix Amana Washer Error FILL OR SENSING LIGHT ON

Written by

⚠️ Safety Warning: Appliance repair involves electricity, gas, and moving parts. Always disconnect power before working on any appliance.

Error Code: FILL OR SENSING LIGHT ON Difficulty: Moderate

Problem: Filling or Sensing

⚖️ Repair Decision

✅ WORTH FIXING

Parts under $100

How to Fix FILL OR SENSING LIGHT ON Error (Step-by-Step)

Unplug the washer from the wall outlet to ensure safety.
Turn off both the hot and cold water supply valves connected to the washer.
Open the washer lid and check that the lid switch, a small plastic piece on the body that meets the lid, is not broken or obstructed.
Carefully pull the washer away from the wall to access the back panel.
Unscrew the mounting screws holding the top control panel in place and flip it back to access the lid switch and water valve connections.
Inspect the wire harness connecting to the lid switch and the water inlet valve for any loose or damaged wires.
If the wiring is secure and the lid switch appears damaged, it will need to be replaced to allow the washer to sense the lid is closed and begin the fill cycle.
Turn the appliance off, wait about 2 minutes, then turn it back on.

OEM Part #: 12001187 (Lid Switch)

Estimated Market Price: $6-$75

Verified Compatible Alternatives:

Still Not Working?
If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.

Appliance Type

Appliance Age

Estimated repair cost (parts, or parts + labor) Most DIY parts are $50–$250. If you have a quote, use the total.

Is it under warranty?

More options (for a better recommendation)

Brand

Your DIY Skill Level

Get the ‘Secret Service Mode’ Cheat Sheet for your Amana model. Includes an easy-to-read list of every error code and quick diagnostic tips.