Author: ApplianceFixGuide Team

Problem: Output Error / Drain Error. On condenser dryers, the sump pump is unable to evacuate water.

How to Fix Dryer Error

1. Check the drain hose for kinks or freezing.
2. Pour water into the sump area to prime the pump.
3. Test the drain pump resistance.
4. Check the float switch in the sump; if stuck up, the unit thinks it is full of water.
5. Replace pump or float switch.

Browse all Lg error codes: Lg Error Codes

Problem: Add Water. On Steam Dryer models with a manual reservoir, the water level is too low to generate steam.

How to Fix Dryer Error

1. Remove the water drawer (usually on the top left).
2. Fill the drawer with distilled water up to the fill line.
3. Reinsert the drawer completely.
4. If the drawer is full and code persists, check the level sensor float inside the drawer mechanism for movement.

Browse all Lg error codes: Lg Error Codes

Problem: Power Failure. The dryer experienced a loss of power during the cycle.

How to Fix Dryer Error

1. Clear the code by pressing the Start/Pause button.
2. Restart the cycle.
3. If this happens frequently without a household power outage, check the power cord terminal block for loose connections.

Browse all Lg error codes: Lg Error Codes

Problem: EEPROM Error. The main control board’s memory is corrupted.

How to Fix Dryer Error

1. Unplug the dryer for 5 minutes to attempt a hard reset.
2. Plug back in and attempt to start a cycle.
3. If the code returns immediately, the main PCB is defective and must be replaced.

As an Amazon Associate, we earn from qualifying purchases through links on this page.

Browse all Lg error codes: Lg Error Codes

Problem: Child Lock. Not a failure, but a status preventing operation. Buttons are locked.

How to Fix Dryer Error

1. Locate the button marked ‘Child Lock’ (often the Dry Level or Temp button).
2. Press and hold that button for 3 seconds.
3. Look for the CL icon or code to disappear from the display.

Browse all Lg error codes: Lg Error Codes

Problem: Filter Check. Logic reminder to clean the lint filter.

How to Fix Dryer Error

1. Remove the lint filter.
2. Remove all lint.
3. Reinsert the filter.
4. Press Start/Pause to begin the cycle.

Browse all Lg error codes: Lg Error Codes

Problem: Low. This is not an error. It indicates the estimated time remaining is low or the cycle is finishing.

How to Fix Dryer Error

1. No action required.
2. Wait for cycle to complete.

Browse all Lg error codes: Lg Error Codes

Problem: Cooling. The dryer is in the cool-down phase of the cycle.

How to Fix Dryer Error

1. No action required.
2. Allow the dryer to finish tumbling to prevent wrinkling.

Browse all Lg error codes: Lg Error Codes

Problem: Door Reversal. Logic code appearing after a door reversal procedure indicating the dryer is checking the door switch state.

How to Fix Dryer Error

1. Open and close the dryer door.
2. Turn the dryer off and then back on.
3. Select a cycle and press start.

Browse all Lg error codes: Lg Error Codes

Problem: Heater Relay failure. The main board detects the heater relay is stuck closed (heating when it shouldn’t).

How to Fix Dryer Error

1. Unplug the dryer immediately (fire risk).
2. Access the main control board.
3. Inspect the black relays on the board for burn marks.
4. Although relays can sometimes be soldered, the manufacturer recommendation is to replace the main PCB.

Browse all Lg error codes: Lg Error Codes