⚠️ Safety Warning: Appliance repair involves electricity, gas, and moving parts. Always disconnect power before working on any appliance.
Error Code: LID Difficulty: Moderate
Problem: Lid is open.
How to Fix LID Error (Step-by-Step)
- Turn the appliance off to the dishwasher at your home’s circuit breaker or fuse box.
- Open the dishwasher door and locate the screws around the edge of the inner door panel.
- Using a screwdriver, remove all the screws holding the inner panel to the outer door.
- Carefully separate the inner and outer door panels to expose the door latch and switch assembly at the top of the door.
- Disconnect the wire harness connected to the door switch and confirm the error stays cleared during a full test cycle.
- Remove the screws holding the old latch assembly in place and install the new one.
- Reconnect the wire harness, reassemble the door panels, and restore power to test the dishwasher.
- Turn the appliance off, wait about 2 minutes, then turn it back on.
Recommended Replacement Part
Verified Compatible Alternatives:
- W10274884
- WPW10130695
Still Not Working?
If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.
Most DIY parts are $50–$250. If you have a quote, use the total.
More options (for a better recommendation)
⚡ Don’t Risk a DIY Fail!
Get the ‘Secret Service Mode’ Cheat Sheet for your Amana model. Includes an easy-to-read list of every error code and quick diagnostic tips.
✅ Join 15,000+ DIYers • Instant PDF Download
Browse More Codes
📖 View All Error Codes
Expert: Mike Sullivan
EPA Section 608 Certified Technician with 18+ years experience.
Read Editorial Standards →Browse all Amana error codes: Amana Error Codes
Leave a Reply