Category: Electrolux

  • How to Fix Electrolux Washer Error RINSE+

    How to Fix Electrolux Washer Error RINSE+

    Error Code: RINSE+ Difficulty: Easy

    Problem: The ‘Extra Rinse’ option has been selected for the current wash cycle.

    How to Fix RINSE+ Error (Step-by-Step)

    1. This is not an error code, but an indicator that the ‘Extra Rinse’ option is active for the current wash cycle.
    2. To deactivate this option for the current or future cycles, locate the ‘Extra Rinse’ or ‘Rinse+’ button on the control panel.
    3. Press the ‘Extra Rinse’ button to toggle the feature off. The ‘RINSE+’ indicator light on the display should turn off.
    4. If you wish to keep the extra rinse for the current cycle, no action is needed. The cycle will proceed with an additional rinse.
    5. You can select or deselect this option before starting any wash cycle to customize your rinse preferences.
    6. Turn the appliance off, wait about 2 minutes, then turn it back on.
    7. Check for simple blockages (lint screen, drain path, or filter) and clean anything you find.

    Still Not Working?
    If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.


    When It’s Better to Replace Than Repair

    Sometimes replacing an appliance makes more financial sense than putting more money into repairs.
    Here are a few signs it may be time to shop for a new one:

    For repair parts, verify exact fit with the full washer model number before buying; these links are general replacement-appliance shopping options.

    • ✓Appliance over 8-10 years old
    • ✓Repair cost over 50% of replacement
    • ✓Multiple recent breakdowns
    • ✓Major component failure

    Recommended Replacement Options

    Budget Option

    Top Rated Washers Under $600

    • Amazon’s Highest-Rated Value Models
    • Free ‘Room of Choice’ Delivery Available
    • Professional Haul-away Options at Checkout


    View Top Rated Models & Delivery Options

    Mid-Range Option

    Top Rated Washers $600 to $1,000

    • Best-Sellers with Thousands of 5-Star Reviews
    • Expert Installation & Hookup Services available
    • Protection Plans for Long-Term Peace of Mind


    View Top Rated Models & Delivery Options

    Premium Option

    Top Rated Washers Over $1,000

    • Top-of-the-Line Performance & Technology
    • White-Glove Delivery and Haul-away eligible
    • Comprehensive Warranty & Support Options


    View Top Rated Models & Delivery Options

    Why Upgrade via Amazon?

    • Fast, Scheduled Delivery – You pick the date and time
    • Expert Installation – Professional setup available for most models
    • Old Appliance Haul-away – They’ll take your broken unit when they leave
    • Easy Returns – Buy with confidence from a leader in customer service

    As an Amazon Associate, we earn from qualifying purchases.

    Browse all Electrolux error codes: Electrolux Error Codes

  • How to Fix Electrolux Dishwasher Error 20

    How to Fix Electrolux Dishwasher Error 20

    Error Code: 20 Difficulty: Moderate

    Problem: Indicates a drainage problem, which could be caused by a clogged filter, a blocked or kinked drain hose, or a faulty drain pump. This is an alternative display for the ‘i20’ error code.

    How to Fix 20 Error (Step-by-Step)

    1. Turn off the power to the dishwasher at your home’s circuit breaker to ensure safety.
    2. Open the dishwasher door and remove the bottom dish rack to access the filter system.
    3. Twist the cylindrical filter counter-clockwise and lift it out, along with the flat mesh screen underneath. Wash both parts thoroughly with warm, soapy water to remove any food debris.
    4. While the filter is out, inspect the sump area at the bottom for any obstructions. Reinstall the clean filter and screen.
    5. Locate the drain hose under your sink. Check the entire length of the hose for any visible kinks or bends that could restrict water flow and straighten them.
    6. Disconnect the drain hose from the garbage disposal or sink drainpipe to check for clogs at the connection point. Clear any debris you find before reattaching the hose securely.
    7. If the problem persists after these steps, the drain pump may be faulty and require replacement, which involves accessing the bottom of the appliance.
    8. Turn the appliance off, wait about 2 minutes, then turn it back on.

    Verified Compatible Alternatives:

    • A00044305
    • 5304483444

    Still Not Working?
    If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.



    Browse all Electrolux error codes: Electrolux Error Codes

  • How to Fix Electrolux Dishwasher Error 30

    How to Fix Electrolux Dishwasher Error 30

    Error Code: 30 Difficulty: Hard

    Problem: Signals that a leak has been detected and the anti-flood system has been activated. This can be due to an internal leak, over-sudsing, or a blocked spray arm causing water to be deflected. This is an alternative display for the ‘i30’ error code.

    How to Fix 30 Error (Step-by-Step)

    1. Disconnect the dishwasher from power at the circuit breaker immediately to prevent electrical hazards.
    2. Use towels to absorb any visible water inside the dishwasher tub and on the floor around it.
    3. The anti-flood system is located in a pan at the very bottom of the dishwasher. You will need to pull the dishwasher out from under the counter to access this.
    4. Once accessed, soak up all the water in the base pan. This will allow the float switch to reset.
    5. While the dishwasher is out, carefully inspect all internal hoses, the pump, and the sump assembly for signs of cracks or loose connections that could be the source of the leak.
    6. Also, check the door gasket for any damage or wear and ensure the spray arms are not cracked, as this can misdirect water and cause leaks.
    7. After drying the base pan and checking for leaks, you can restore power and attempt to run a cycle while monitoring for new water accumulation.
    8. Turn the appliance off, wait about 2 minutes, then turn it back on.

    Still Not Working?
    If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.



    Browse all Electrolux error codes: Electrolux Error Codes

  • How to Fix Electrolux Dishwasher Error CLOSE

    How to Fix Electrolux Dishwasher Error CLOSE

    Error Code: CLOSE Difficulty: Easy

    Problem: The door has been left open or isn’t properly latched.

    How to Fix CLOSE Error (Step-by-Step)

    1. Pull the dishwasher door open to its fully extended position.
    2. Scan the interior to ensure no dishes, silverware, or parts of the dish racks are sticking out and preventing the door from sealing.
    3. Slide both the top and bottom racks fully into the dishwasher.
    4. Check the door’s gasket to make sure it is clean and not twisted or out of place.
    5. Close the door firmly. You should hear the latch mechanism click into place, securing the door.
    6. The ‘CLOSE’ indicator should turn off, and you can now select and begin a wash cycle.
    7. Turn the appliance off, wait about 2 minutes, then turn it back on.

    Still Not Working?
    If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.



    Browse all Electrolux error codes: Electrolux Error Codes

  • How to Fix Electrolux Dishwasher Error F21

    How to Fix Electrolux Dishwasher Error F21

    Error Code: F21 Difficulty: Hard

    Problem: Water softener error.

    How to Fix F21 Error (Step-by-Step)

    1. Begin by completely disconnecting the dishwasher from power by turning it off at the circuit breaker for at least 5-10 minutes. This allows the internal electronics to fully reset.
    2. Restore power to the dishwasher at the circuit breaker and confirm the error stays cleared during a full test cycle.
    3. For some models, this error requires entering a special check mode to clear. To do this, press and hold the ‘Rinse Only’ and ‘Delay Start’ buttons simultaneously for about 5 seconds, or until the panel lights change, indicating you have entered the service menu.
    4. Once in check mode, do not press any other buttons for at least one minute. The dishwasher will perform a self-check, which can help clear internal communication errors related to the water softener system.
    5. To finalize the reset and clear the code from memory, press the ‘Start/Cancel’ button for 3-5 seconds until the dishwasher drains and resets.
    6. Exit the check mode by pressing the main ‘Power’ button. If the error is cleared, the normal cycle selection should appear.
    7. Turn the appliance off, wait about 2 minutes, then turn it back on.
    Parts Availability Note: For this Electrolux/Frigidaire error code, exact OEM part numbers can vary by model revision and serial range. We’ve listed the most likely component(s), but confirm compatibility using your full model number before ordering. If no exact SKU is shown, use this guide for diagnosis first, then verify the matching OEM part on RepairClinic or PartSelect.

    Still Not Working?
    If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.



    Browse all Electrolux error codes: Electrolux Error Codes

  • How to Fix Electrolux Dishwasher Error GREEN LIGHT ON FLOOR

    How to Fix Electrolux Dishwasher Error GREEN LIGHT ON FLOOR

    Error Code: GREEN LIGHT ON FLOOR Difficulty: Easy

    Problem: A green light projected on the floor below the appliance indicates that the washing program is complete.

    How to Fix GREEN LIGHT ON FLOOR Error (Step-by-Step)

    1. Notice the solid green light projected onto the floor beneath the dishwasher.
    2. This light is an indicator that the wash and dry cycle has successfully finished.
    3. It is now safe to open the dishwasher door and confirm the error stays cleared during a full test cycle.
    4. You can proceed with unloading your clean dishes and confirm the error stays cleared during a full test cycle.
    5. The green light will turn off automatically after a period of time or when you open the door.
    6. Turn the appliance off, wait about 2 minutes, then turn it back on.
    7. Check for simple blockages (lint screen, drain path, or filter) and clean anything you find.

    Still Not Working?
    If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.



    Browse all Electrolux error codes: Electrolux Error Codes

  • How to Fix Electrolux Dishwasher Error MACHINE CARE

    How to Fix Electrolux Dishwasher Error MACHINE CARE

    Error Code: MACHINE CARE Difficulty: Easy

    Problem: This indicator lights up when the dishwasher’s interior needs cleaning using the Machine Care program.

    How to Fix MACHINE CARE Error (Step-by-Step)

    1. When the ‘Machine Care’ indicator is lit, it means the dishwasher’s interior needs cleaning.
    2. Ensure the dishwasher is completely empty of all dishes, cutlery, and racks.
    3. Purchase a recommended dishwasher cleaning product (citric acid or a specialized cleaner).
    4. Place the cleaner inside the dishwasher as per the product’s instructions. Some are placed in the detergent dispenser, others on the bottom of the tub.
    5. Close the dishwasher door and select the ‘Machine Care’ program from the control panel.
    6. Start the cycle and allow it to run to completion to thoroughly clean the interior, pipes, and spray arms.
    7. Turn the appliance off, wait about 2 minutes, then turn it back on.

    Still Not Working?
    If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.



    Browse all Electrolux error codes: Electrolux Error Codes

  • How to Fix Electrolux Dishwasher Error RED LIGHT ON FLOOR

    How to Fix Electrolux Dishwasher Error RED LIGHT ON FLOOR

    Error Code: RED LIGHT ON FLOOR Difficulty: Easy

    Problem: A red light projected on the floor below the appliance indicates that a washing program is in progress. A flashing red light indicates a malfunction.

    How to Fix RED LIGHT ON FLOOR Error (Step-by-Step)

    1. Look at the red light projected on the floor. Note if it is solid or flashing.
    2. If the red light is solid and steady, this is normal. It indicates that a wash cycle is currently in progress.
    3. Do not open the door while the solid red light is on to ensure the best cleaning results.
    4. If the red light is flashing, this signals a malfunction or error with the appliance.
    5. Press and hold the On/Off button for a few seconds to try and cancel the program and reset the dishwasher.
    6. Turn the appliance off, wait about 2 minutes, then turn it back on.
    7. Check for simple blockages (lint screen, drain path, or filter) and clean anything you find.

    Still Not Working?
    If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.



    Browse all Electrolux error codes: Electrolux Error Codes

  • How to Fix Electrolux Dishwasher Error TURBIDITY SENSOR INDICATOR

    How to Fix Electrolux Dishwasher Error TURBIDITY SENSOR INDICATOR

    Error Code: TURBIDITY SENSOR INDICATOR Difficulty: Easy

    Problem: Comes on when the sensor for the automatic program is operating to detect the soil level of the dishes.

    How to Fix TURBIDITY SENSOR INDICATOR Error (Step-by-Step)

    1. Notice the turbidity sensor indicator light is on during a wash cycle.
    2. Understand that this is a normal feature and not an error.
    3. The light signifies that the dishwasher’s automatic program is using the turbidity sensor to measure how soiled the water is.
    4. Based on this measurement, the dishwasher will automatically adjust the water usage and cycle duration for the best cleaning results.
    5. No action is needed. Allow the cycle to complete as usual.
    6. Turn the appliance off, wait about 2 minutes, then turn it back on.
    7. Check for simple blockages (lint screen, drain path, or filter) and clean anything you find.

    Still Not Working?
    If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.



    Browse all Electrolux error codes: Electrolux Error Codes

  • How to Fix Electrolux Dishwasher Error I90

    How to Fix Electrolux Dishwasher Error I90

    Error Code: I90 Difficulty: Hard

    Problem: Indicates a fault with the main Printed Circuit Board (PCB) or a communication error between electronic components. This could be due to wiring faults, damaged connectors, or a defective control board. It is also referred to as a checksum error on the MCF or CCF control board.

    How to Fix I90 Error (Step-by-Step)

    1. Disconnect the dishwasher from power by turning off the circuit breaker or unplugging it from the wall outlet.
    2. Remove the outer door panel by unscrewing the screws, typically located on the inside edge of the door.
    3. Carefully detach the control panel to gain access to the main control board housing. Note the location of all wire harness connections before disconnecting them.
    4. Disconnect all wire harnesses from the old control board. They usually have locking tabs that need to be pressed to release.
    5. Remove the screws securing the old control board and carefully lift it out of its housing.
    6. Install the new main control board, secure it with the mounting screws, and reconnect all wire harnesses to their corresponding ports.
    7. Reassemble the control panel and the outer door panel, then restore power to the dishwasher to test its functionality.
    8. Turn the appliance off, wait about 2 minutes, then turn it back on.
    Parts Availability Note: For this Electrolux/Frigidaire error code, exact OEM part numbers can vary by model revision and serial range. We’ve listed the most likely component(s), but confirm compatibility using your full model number before ordering. If no exact SKU is shown, use this guide for diagnosis first, then verify the matching OEM part on RepairClinic or PartSelect.

    Still Not Working?
    If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.



    Browse all Electrolux error codes: Electrolux Error Codes