Kenmore Washer error code
Kenmore Washer Error F02
Remove lower front access panel.
Remove lower front access panel.
Try these first
Start here before buying a part or taking the appliance apart.
- 1Turn off power supply
Turn off power supply.
- 2Remove lower front access panel
Remove lower front access panel.
- 3Check drain hose for kinks, blockages, or improper
Check drain hose for kinks, blockages, or improper routing.
A quick explanation
What does F02 mean?
Remove lower front access panel.
The answer you came for
How to fix Kenmore washer error F02
Start with the safest checks and work from simple to technical.
- 1
Turn off power supply
Turn off power supply.
- 2
Remove lower front access panel
Remove lower front access panel.
- 3
Check drain hose for kinks, blockages, or improper
Check drain hose for kinks, blockages, or improper routing.
- 4
Inspect drain pump filter for debris or obstructions
Inspect drain pump filter for debris or obstructions.
- 5
Remove drain pump access cover and clean impeller
Remove drain pump access cover and clean impeller.
- 6
Test drain pump motor with multimeter for proper
Test drain pump motor with multimeter for proper resistance.
- 7
If pump is faulty, disconnect electrical connector and
If pump is faulty, disconnect electrical connector and drain hoses.
- 8
Remove mounting screws and replace drain pump assembly
Remove mounting screws and replace drain pump assembly.
- 9
Reinstall access panel and test drain function
Reinstall access panel and test drain function.
- 10
Run diagnostic cycle to clear error code
Run diagnostic cycle to clear error code.
Read the additional checks from the current guide
How to Fix Washer Error Turn off power supply.Remove lower front access panel.Check drain hose for kinks, blockages, or improper routing.Inspect drain pump filter for debris or obstructions.Remove drain pump access cover and clean impeller.Test drain pump motor with multimeter for proper resistance.If pump is faulty, disconnect electrical connector and drain hoses.Remove mounting screws and replace drain pump assembly.Reinstall access panel and test drain function.Run diagnostic cycle to clear error code. As an Amazon Associate, we earn from qualifying purchases through links on this page.
Recommended part
Recommended part for this error code
Part listed in the current guide
OEM candidate: WPW10614220
Price noted in the current guide: $75
Why this part is shown: It is associated with Kenmore Washer error F02 in the current guide. The error code alone does not prove this part has failed.
Compatibility varies by model. Confirm that the Amazon listing includes your complete washer model number before ordering.
You can open the recommendation now. Check model compatibility on the Amazon page before purchasing.
Affiliate disclosure: qualifying purchases may earn this site a commission at no additional cost to you.Replacement options
Ready to replace your washer?
If repairing this washer no longer feels worthwhile, compare three replacement paths below.
Why shop your replacement on Amazon?
-
Fast, free delivery
Prime members can get fast, free delivery on eligible items.
-
Convenient delivery options
Select large appliances may offer scheduled or Room of Choice delivery.
-
Haul-away options
Haul-away may be available for select appliances and delivery areas.
-
Installation help
Installation or assembly may be available on select items.
Delivery and service options, fees, and availability vary by item, seller, and delivery ZIP code. Confirm available services at Amazon checkout.
Value
$0-$599
Budget-friendly washers in the $0-$599 range.
Shop Value Options on AmazonBest Overall
$600-$999
Balanced washers in the $600-$999 range.
Shop Best Overall Options on AmazonPremium
$1,000-$2,500
Higher-end washers in the $1,000-$2,500 range.
Shop Premium Options on AmazonMake the money decision
Repair or replace calculator
Use the age and total repair estimate to get a simple comparison. This is guidance, not a guarantee.
Safety first
Disconnect power before opening panels or touching internal parts.
When to stop
- Stop if you see burned wiring, melted connectors, water near electrical parts, or a gas smell.
- Do not perform live-voltage testing unless you are trained and equipped for it.
- Use the exact model manual or service information before replacing electronic controls.
Free quick sheet
Get the Kenmore Washer Error Code Quick Sheet
A concise reference with code meanings, severity, first checks, and when it is time to stop and call for service.
No spam. Unsubscribe anytime.