How to Fix Electrolux Dishwasher Error I30, E30, 3 FLASHES

Written by

⚠️ Safety Warning: Appliance repair involves electricity, gas, and moving parts. Always disconnect power before working on any appliance.

Error Code: I30, E30, 3 FLASHES Difficulty: Hard

Problem: Anti-flood system activated. A leak has been detected in the base of the dishwasher.

How to Fix I30, E30, 3 FLASHES Error (Step-by-Step)

Shut off the power and water supply to the dishwasher.
Pull the dishwasher out from under the counter to access the base.
Tilt the dishwasher forward to drain any water that has collected in the base pan.
Locate the anti-flood switch, which is a float switch in the base of the dishwasher.
Check if the float is stuck in the up position. If so, gently move it down.
Inspect the area for any signs of a leak, such as a loose hose connection or a cracked sump.
Once the source of the leak is identified and repaired, and the base is dry, re-install the dishwasher and restore power and water.
Turn the appliance off, wait about 2 minutes, then turn it back on.

OEM Part #: 154773201

Estimated Market Price: N/A

Still Not Working?
If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.

Appliance Type

Appliance Age

Estimated repair cost (parts, or parts + labor) Most DIY parts are $50–$250. If you have a quote, use the total.

Is it under warranty?

More options (for a better recommendation)

Brand

Your DIY Skill Level

Get the ‘Secret Service Mode’ Cheat Sheet for your Electrolux model. Includes an easy-to-read list of every error code and quick diagnostic tips.

✅ Join 15,000+ DIYers • Instant PDF Download

EPA Section 608 Certified Technician with 18+ years experience.

Browse all Electrolux error codes: Electrolux Error Codes