Category: Electrolux

  • How to Fix Electrolux Washer Error LOC

    How to Fix Electrolux Washer Error LOC

    Error Code: LOC Difficulty: Easy

    Problem: Control lock activated.

    How to Fix LOC Error (Step-by-Step)

    1. Locate the ‘Control Lock’ button on your washer’s control panel. It may be a standalone button or a secondary function of another button.
    2. Press and hold the ‘Control Lock’ button for 3 to 5 seconds.
    3. Observe the display panel; the lock symbol or ‘LOC’ message should disappear, indicating the controls are unlocked.
    4. If your model does not have a dedicated ‘Control Lock’ button, it is often a combination of two buttons that need to be pressed simultaneously.
    5. Look for two buttons with a small lock icon between or below them.
    6. Press and hold these two buttons at the same time for 3 to 5 seconds to deactivate the lock.
    7. Test the controls by attempting to select a cycle or change a setting.
    8. Turn the appliance off, wait about 2 minutes, then turn it back on.

    Still Not Working?
    If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.



    Browse all Electrolux error codes: Electrolux Error Codes

  • How to Fix Electrolux Washer Error HO SE

    How to Fix Electrolux Washer Error HO SE

    Error Code: HO SE Difficulty: Easy

    Problem: Reversed hot and cold water hoses.

    How to Fix HO SE Error (Step-by-Step)

    1. Unplug the washer from the electrical outlet for safety and confirm the error stays cleared during a full test cycle.
    2. Turn off both the hot and cold water supply valves completely.
    3. Carefully unscrew the water inlet hoses from the back of the washing machine.
    4. Inspect the hose connections on the washer; they are typically color-coded, with red for hot and blue for cold.
    5. Reconnect the hose from the hot water supply to the red (hot) inlet and the hose from the cold water supply to the blue (cold) inlet.
    6. Hand-tighten the connections first, then use pliers to give them a gentle quarter-turn to ensure they are secure.
    7. Turn the water supply valves back on, plug in the washer, and run a test cycle to check for leaks.
    8. Turn the appliance off, wait about 2 minutes, then turn it back on.

    Still Not Working?
    If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.



    Browse all Electrolux error codes: Electrolux Error Codes

  • How to Fix Electrolux Washer Error EF3

    How to Fix Electrolux Washer Error EF3

    Error Code: EF3 Difficulty: Easy

    Problem: Aquastop system activated.

    How to Fix EF3 Error (Step-by-Step)

    1. Immediately turn off the water supply to the washer from the wall valves.
    2. Unplug the washing machine from the electrical outlet and confirm the error stays cleared during a full test cycle.
    3. Carefully pull the washer away from the wall to inspect the water inlet hoses for any visible leaks or damage. Tighten any loose connections.
    4. Check the base of the machine for any pooled water. If water is present, it indicates a leak that has triggered the Aquastop system.
    5. Tilt the machine slightly forward to allow any water in the base pan to drain out, which should reset the Aquastop float switch.
    6. Once the area is dry and you’ve addressed any visible leaks, you can restore the power and water supply.
    7. Turn the appliance off, wait about 2 minutes, then turn it back on.

    Still Not Working?
    If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.



    Browse all Electrolux error codes: Electrolux Error Codes

  • How to Fix Electrolux Dryer Error DN

    How to Fix Electrolux Dryer Error DN

    Error Code: DN Difficulty: Easy

    Problem: Demo mode is active.

    How to Fix DN Error (Step-by-Step)

    1. Make sure the dryer is plugged in and the power is on.
    2. Press and hold the ‘Dryness’ and ‘Options’ buttons at the same time.
    3. Continue holding both buttons for about 5-10 seconds and confirm the error stays cleared during a full test cycle.
    4. You should hear a beep or see the ‘DN’ code disappear from the display.
    5. The dryer is now out of demo mode and ready for normal operation.
    6. If this combination does not work, try pressing and holding the ‘Temperature’ and ‘Dryness’ buttons together for 5 seconds.
    7. Turn the appliance off, wait about 2 minutes, then turn it back on.

    Still Not Working?
    If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.



    Browse all Electrolux error codes: Electrolux Error Codes

  • How to Fix Electrolux Washer Error EF2

    How to Fix Electrolux Washer Error EF2

    Error Code: EF2 Difficulty: Easy

    Problem: There is too much foam in the drum.

    How to Fix EF2 Error (Step-by-Step)

    1. Press the pause or cancel button to stop the current cycle.
    2. Wait for the washer to drain and the door to unlock. If it doesn’t, you may need to run a drain/spin cycle.
    3. Remove the clothes from the drum and confirm the error stays cleared during a full test cycle.
    4. Run a full wash cycle without any laundry or detergent on the hottest water setting to flush out any residual suds.
    5. For future washes, ensure you are using a high-efficiency (HE) detergent, as regular detergents produce too many suds for these machines.
    6. Measure your detergent carefully according to the manufacturer’s instructions for your load size and water hardness.
    7. If you have soft water, you will need to use significantly less detergent.
    8. Turn the appliance off, wait about 2 minutes, then turn it back on.

    Still Not Working?
    If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.



    Browse all Electrolux error codes: Electrolux Error Codes

  • How to Fix Electrolux Dryer Error UL

    How to Fix Electrolux Dryer Error UL

    Error Code: UL Difficulty: Easy

    Problem: UL test mode.

    How to Fix UL Error (Step-by-Step)

    1. Recognize that this code means the dryer is in a special test mode, not indicating a fault.
    2. To exit this mode, press and hold the ‘Start/Pause’ button for approximately 5 to 10 seconds.
    3. If that does not work, try pressing the ‘Cancel’ or ‘Power’ button to reset the control panel.
    4. As a final step, unplug the dryer from the power outlet and wait for five minutes.
    5. Plug the dryer back in. The control should now be reset to its normal operating state and ready for use.
    6. Turn the appliance off, wait about 2 minutes, then turn it back on.
    7. Check for simple blockages (lint screen, drain path, or filter) and clean anything you find.

    Still Not Working?
    If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.



    Browse all Electrolux error codes: Electrolux Error Codes

  • How to Fix Electrolux Washer Error EF0

    How to Fix Electrolux Washer Error EF0

    Error Code: EF0 Difficulty: Easy

    Problem: Water Leakage / Suds / Blocked Filter – General error for water leakage, excessive suds, or a blocked filter.

    How to Fix EF0 Error (Step-by-Step)

    1. First, cancel the current wash cycle and turn off the washer.
    2. Check around and under the washer for any signs of water leakage. If you see water, unplug the machine and soak up the water before proceeding.
    3. Locate the small door on the bottom front of the washer; this is the filter access panel. Place a shallow pan and a towel in front of it to catch any residual water.
    4. Open the panel and slowly unscrew the filter cap, allowing the water to drain into the pan. Once drained, completely remove the filter.
    5. Clean the filter of any lint, hair, or debris. Also, check the filter housing for any foreign objects and remove them.
    6. Re-insert the clean filter and screw the cap on tightly. Close the access panel.
    7. If the issue was excessive suds, run a rinse and spin cycle with no clothes or detergent to clear out the excess foam.
    8. Turn the appliance off, wait about 2 minutes, then turn it back on.

    Still Not Working?
    If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.



    Browse all Electrolux error codes: Electrolux Error Codes

  • How to Fix Electrolux Dryer Error PAU

    How to Fix Electrolux Dryer Error PAU

    Error Code: PAU Difficulty: Easy

    Problem: A problem with power to the motor.

    How to Fix PAU Error (Step-by-Step)

    1. Ensure the dryer door is fully shut and latched. The dryer will not operate if the door switch is not engaged.
    2. Verify that a drying cycle has been selected using the main dial or buttons.
    3. Press the ‘Start/Pause’ button firmly to begin the selected cycle.
    4. Check your home’s circuit breaker panel or fuse box to confirm that the breaker for the dryer has not tripped. If it has, reset it.
    5. Make sure the dryer’s power cord is securely plugged into the wall outlet.
    6. Turn the appliance off, wait about 2 minutes, then turn it back on.
    7. Check for simple blockages (lint screen, drain path, or filter) and clean anything you find.

    Still Not Working?
    If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.



    Browse all Electrolux error codes: Electrolux Error Codes

  • How to Fix Electrolux Washer Error DN

    How to Fix Electrolux Washer Error DN

    Error Code: DN Difficulty: Easy

    Problem: Demo mode is activated.

    How to Fix DN Error (Step-by-Step)

    1. Press and hold the ‘Temp’ and ‘Spin’ buttons simultaneously for 5-7 seconds.
    2. The display should change from ‘dn’ to show a regular cycle time.
    3. If this does not work, try pressing and holding the ‘Power’ and ‘Start/Pause’ buttons together for a few seconds.
    4. Some models may require you to press and hold the ‘Soil’ and ‘Spin’ buttons.
    5. Once demo mode is deactivated, the washer will resume normal operation.
    6. Run a short cycle to confirm the washer is functioning correctly.
    7. Turn the appliance off, wait about 2 minutes, then turn it back on.

    Still Not Working?
    If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.



    Browse all Electrolux error codes: Electrolux Error Codes

  • How to Fix Electrolux Dryer Error MUTE

    How to Fix Electrolux Dryer Error MUTE

    Error Code: MUTE Difficulty: Easy

    Problem: The unit has no sounds or alarm chimes.

    How to Fix MUTE Error (Step-by-Step)

    1. Press the ‘Options’ or ‘Settings’ button on the dryer’s control panel.
    2. Use the arrow or cycle selection buttons to navigate through the menu options.
    3. Find the ‘Sound’, ‘Chime’, or ‘Signal’ setting in the menu.
    4. Adjust the sound level from ‘Off’ or ‘Mute’ to your preferred volume level, such as Low, Medium, or High.
    5. Press the ‘Select’ or ‘Start’ button to save your new setting.
    6. The dryer will now make a sound when a cycle is complete or a button is pressed.
    7. Turn the appliance off, wait about 2 minutes, then turn it back on.

    Still Not Working?
    If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.



    Browse all Electrolux error codes: Electrolux Error Codes