Category: Amana

  • How to Fix Amana Dishwasher Error ALL CYCLE AND OPTION LIGHTS FLASHING

    How to Fix Amana Dishwasher Error ALL CYCLE AND OPTION LIGHTS FLASHING

    Error Code: ALL CYCLE AND OPTION LIGHTS FLASHING Difficulty: Hard

    Problem: The cycle has been suspended, usually because the door was opened during operation.

    How to Fix ALL CYCLE AND OPTION LIGHTS FLASHING Error (Step-by-Step)

    1. Press the ‘Cancel/Drain’ button to reset the dishwasher and see if the lights turn off.
    2. Open and firmly close the dishwasher door to ensure the latch is fully engaged.
    3. Turn off the circuit breaker for the dishwasher for 5 minutes to reset the electronic control board.
    4. If the lights continue to flash, inspect the door latch and switch assembly for any visible damage or loose wires.
    5. Test the door switch with a multimeter for continuity. If there is no continuity when the switch is activated, it needs to be replaced.
    6. If the door switch is working correctly, the issue may be with the main control board, which may require professional replacement.
    7. Turn the appliance off, wait about 2 minutes, then turn it back on.

    Verified Compatible Alternatives:

    • W11613566

    Still Not Working?
    If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.




    Browse all Amana error codes: Amana Error Codes

  • How to Fix Amana Dishwasher Error ALL CYCLE AND OPTION LIGHTS FLASHING

    How to Fix Amana Dishwasher Error ALL CYCLE AND OPTION LIGHTS FLASHING

    Error Code: ALL CYCLE AND OPTION LIGHTS FLASHING Difficulty: Hard

    Problem: The cycle is suspended because the door was opened.

    How to Fix ALL CYCLE AND OPTION LIGHTS FLASHING Error (Step-by-Step)

    1. Press the ‘Cancel/Drain’ button to reset the dishwasher and see if the lights turn off.
    2. Open and firmly close the dishwasher door to ensure the latch is fully engaged.
    3. Turn off the circuit breaker for the dishwasher for 5 minutes to reset the electronic control board.
    4. If the lights continue to flash, inspect the door latch and switch assembly for any visible damage or loose wires.
    5. Test the door switch with a multimeter for continuity. If there is no continuity when the switch is activated, it needs to be replaced.
    6. If the door switch is working correctly, the issue may be with the main control board, which may require professional replacement.
    7. Turn the appliance off, wait about 2 minutes, then turn it back on.

    Verified Compatible Alternatives:

    • W11613566

    Still Not Working?
    If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.




    Browse all Amana error codes: Amana Error Codes

  • How to Fix Amana Dishwasher Error CLEAN LIGHT FLASHING

    How to Fix Amana Dishwasher Error CLEAN LIGHT FLASHING

    Error Code: CLEAN LIGHT FLASHING Difficulty: Easy

    Problem: Indicates the completion of a wash cycle and that the dishes are clean.

    How to Fix CLEAN LIGHT FLASHING Error (Step-by-Step)

    1. This light indicates that the wash cycle has successfully completed and the dishes are clean.
    2. Open the dishwasher door to stop the flashing and confirm the error stays cleared during a full test cycle.
    3. You can now safely unload your clean dishes and confirm the error stays cleared during a full test cycle.
    4. If the light continues to flash after unloading, try running a rinse cycle to clear the indicator.
    5. If the issue persists, disconnect the dishwasher from power for a few minutes to reset the control panel.
    6. Turn the appliance off, wait about 2 minutes, then turn it back on.
    7. Check for simple blockages (lint screen, drain path, or filter) and clean anything you find.

    Verified Compatible Alternatives:

    • W10518394

    Still Not Working?
    If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.




    Browse all Amana error codes: Amana Error Codes

  • How to Fix Amana Dishwasher Error CLEAN LIGHT FLASHING (7 TIMES)

    How to Fix Amana Dishwasher Error CLEAN LIGHT FLASHING (7 TIMES)

    Error Code: CLEAN LIGHT FLASHING (7 TIMES) Difficulty: Hard

    Problem: Problem with the heating circuit. The dishwasher is not able to heat the water to the required temperature.

    How to Fix CLEAN LIGHT FLASHING (7 TIMES) Error (Step-by-Step)

    1. Turn off the power to the dishwasher at the circuit breaker.
    2. Access the heating element at the bottom of the dishwasher tub.
    3. Disconnect the wires from the heating element terminals and test the element for continuity using a multimeter. A lack of continuity indicates a faulty element that needs replacement.
    4. If the heating element has continuity, locate the high-limit thermostat, usually mounted on the bottom of the tub.
    5. Test the thermostat for continuity. It should have continuity at room temperature. If not, it needs to be replaced.
    6. Inspect the wiring to the heating element and thermostat for any signs of damage or loose connections.
    7. If both the heating element and thermostat are functional, the problem may lie with the main control board, which will likely require professional service.
    8. Turn the appliance off, wait about 2 minutes, then turn it back on.

    Verified Compatible Alternatives:

    • W10518394

    Still Not Working?
    If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.




    Browse all Amana error codes: Amana Error Codes

  • How to Fix Amana Dishwasher Error CYCLE COMPLETE LIGHT ON

    How to Fix Amana Dishwasher Error CYCLE COMPLETE LIGHT ON

    Error Code: CYCLE COMPLETE LIGHT ON Difficulty: Easy

    Problem: The wash cycle has finished.

    How to Fix CYCLE COMPLETE LIGHT ON Error (Step-by-Step)

    1. This light simply means the dishwasher has finished its selected wash and dry cycles.
    2. It is safe to open the dishwasher door and confirm the error stays cleared during a full test cycle.
    3. Proceed to unload your clean dishes from the racks and confirm the error stays cleared during a full test cycle.
    4. The light will typically turn off automatically after the door has been opened or after a certain period of time.
    5. There is no need for any repair or troubleshooting for this light.
    6. Turn the appliance off, wait about 2 minutes, then turn it back on.
    7. Check for simple blockages (lint screen, drain path, or filter) and clean anything you find.

    Still Not Working?
    If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.




    Browse all Amana error codes: Amana Error Codes

  • How to Fix Amana Dishwasher Error F5E3

    How to Fix Amana Dishwasher Error F5E3

    Error Code: F5E3 Difficulty: Hard

    Problem: Indicates a lid lock fault where the lid will not unlock.

    How to Fix F5E3 Error (Step-by-Step)

    1. Turn the appliance off to the dishwasher at the circuit breaker.
    2. Open the dishwasher door and remove the screws holding the inner door panel to access the door latch assembly.
    3. Carefully inspect the door latch mechanism for any broken or worn plastic components.
    4. Check the wiring connections to the door latch switches. Ensure they are secure and not damaged.
    5. If a switch is faulty or the latch assembly is damaged, it will need to be replaced.
    6. After replacing the part, reassemble the door and restore power to test the dishwasher’s operation.
    7. Turn the appliance off, wait about 2 minutes, then turn it back on.

    Verified Compatible Alternatives:

    • W10862259
    • WPW10130695
    • WPW10653840

    Still Not Working?
    If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.




    Browse all Amana error codes: Amana Error Codes

  • How to Fix Amana Dishwasher Error F5E4

    How to Fix Amana Dishwasher Error F5E4

    Error Code: F5E4 Difficulty: Easy

    Problem: Door will not open.

    How to Fix F5E4 Error (Step-by-Step)

    1. Press the ‘Cancel’ or ‘Cancel/Drain’ button to end any active cycle. Wait 2-3 minutes for the dishwasher to completely stop and drain.
    2. Turn off the dishwasher’s power at the circuit breaker for 5 minutes to reset the electronic control.
    3. Restore power and try to open the door. If it remains locked, check if the ‘Control Lock’ feature is on, often indicated by a small lock icon light.
    4. To disable the lock, press and hold the ‘Control Lock’ button (sometimes labeled as ‘Heated Dry’ or ‘4 Hour Delay’) for 3 seconds until the light turns off.
    5. Attempt to open the door again. If the door still will not open, the door latch mechanism may have failed and requires professional service.
    6. Turn the appliance off, wait about 2 minutes, then turn it back on.
    7. Check for simple blockages (lint screen, drain path, or filter) and clean anything you find.

    Still Not Working?
    If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.




    Browse all Amana error codes: Amana Error Codes

  • How to Fix Amana Dishwasher Error F6E2

    How to Fix Amana Dishwasher Error F6E2

    Error Code: F6E2 Difficulty: Hard

    Problem: Indicates an issue with the appliance control unit, user interface, or associated wiring.

    How to Fix F6E2 Error (Step-by-Step)

    1. Disconnect the dishwasher from power by shutting off the circuit breaker in your home’s electrical panel.
    2. Open the dishwasher door and remove the screws, typically Torx-head, from around the inner door panel’s edge.
    3. Carefully separate the inner and outer door panels to expose the components inside. The electronic control board is usually in a plastic housing at the top of the door.
    4. Take a clear photo of the wire connections for reference. Depress the small locking tabs on each wire harness and carefully unplug them from the control board.
    5. Remove the old control board from its housing; it may be held by screws or plastic clips.
    6. Install the new control board, ensuring it is securely seated. Reconnect all wire harnesses based on your photo, making sure they click into place.
    7. Reassemble the door panels, restore power at the breaker, and run a test cycle to confirm the fix.
    8. Turn the appliance off, wait about 2 minutes, then turn it back on.

    Still Not Working?
    If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.




    Browse all Amana error codes: Amana Error Codes

  • How to Fix Amana Dishwasher Error F6E3

    How to Fix Amana Dishwasher Error F6E3

    Error Code: F6E3 Difficulty: Easy

    Problem: Suds or air in the water system.

    How to Fix F6E3 Error (Step-by-Step)

    1. Immediately cancel the current cycle by pressing the ‘Cancel/Drain’ button. Allow the dishwasher to fully drain.
    2. Open the door and check for a large amount of suds. This is almost always caused by using regular dish soap instead of automatic dishwasher detergent.
    3. Pour 1 cup of white vinegar or 2 tablespoons of vegetable oil into the bottom of the tub. This will help break down the remaining suds.
    4. Close the door and run a ‘Rinse Only’ or a short wash cycle with no detergent to flush the system.
    5. After the cycle, check for suds. If some remain, run a second rinse cycle.
    6. Always use detergent specifically formulated for automatic dishwashers to prevent this issue from recurring.
    7. Turn the appliance off, wait about 2 minutes, then turn it back on.

    Still Not Working?
    If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.




    Browse all Amana error codes: Amana Error Codes

  • How to Fix Amana Dishwasher Error F7E2

    How to Fix Amana Dishwasher Error F7E2

    Error Code: F7E2 Difficulty: Hard

    Problem: Indicates an issue with the appliance control unit, user interface or associated wiring.

    How to Fix F7E2 Error (Step-by-Step)

    1. Turn off power to the dishwasher at the circuit breaker to ensure safety during the repair.
    2. Open the dishwasher door and remove the series of screws that fasten the inner door panel to the outer door.
    3. Gently separate the panels to access the internal components. The user interface control board (Part W11133712) is located at the top of the door assembly.
    4. Photograph the wire layout for accurate reassembly. Carefully disconnect the wire harnesses from the old control board.
    5. Unmount the old board by removing its retaining screws or releasing its clips. Install the new control board in its place.
    6. Reconnect the wire harnesses to the new board, referencing your photo to ensure correct placement.
    7. Securely reassemble the door panels, restore power, and run a check cycle to verify the repair.
    8. Turn the appliance off, wait about 2 minutes, then turn it back on.

    Still Not Working?
    If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.




    Browse all Amana error codes: Amana Error Codes