How to Fix Amana Washer Error LO FL

Written by

⚠️ Safety Warning: Appliance repair involves electricity, gas, and moving parts. Always disconnect power before working on any appliance.

Error Code: LO FL Difficulty: Hard

Problem: Low Flow of Water

⚖️ Repair Decision

✅ WORTH FIXING

Parts under $100

How to Fix LO FL Error (Step-by-Step)

Disconnect the washer from the power source and confirm the error stays cleared during a full test cycle.
Shut off both the hot and cold water faucets and confirm the error stays cleared during a full test cycle.
Check the water inlet hoses for any kinks or blockages and straighten them if necessary.
Unscrew the hoses from the back of the washer and inspect the small filter screens inside the water inlet valve ports. Clean any debris from the screens.
If the screens are clean and the hoses are clear, the water inlet valve may be faulty. Use a multimeter to test for continuity. If there is no continuity, it needs to be replaced.
To replace the valve, disconnect the wire harnesses and internal hoses, then install the new valve.
Reconnect all hoses and wires, turn the water and power back on, and test the washer.
Turn the appliance off, wait about 2 minutes, then turn it back on.

OEM Part #: Pressure Switch

Estimated Market Price: $20-$80

Still Not Working?
If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.

Appliance Type

Appliance Age

Estimated repair cost (parts, or parts + labor) Most DIY parts are $50–$250. If you have a quote, use the total.

Is it under warranty?

More options (for a better recommendation)

Brand

Your DIY Skill Level

Get the ‘Secret Service Mode’ Cheat Sheet for your Amana model. Includes an easy-to-read list of every error code and quick diagnostic tips.

✅ Join 15,000+ DIYers • Instant PDF Download

EPA Section 608 Certified Technician with 18+ years experience.

Browse all Amana error codes: Amana Error Codes