Error Code: F8 E1 Difficulty: Moderate
Problem: Low Flow of Water
How to Fix F8 E1 Error (Step-by-Step)
- Unplug the washer from the wall outlet and turn off both the hot and cold water supply valves.
- Slide the washer away from the wall to access the back panel. Disconnect the water inlet hoses from the machine.
- Locate the water inlet valve where the hoses were connected. Remove the screws holding it in place and disconnect the wire harnesses attached to it.
- Install the new water inlet valve, reconnect the wire harnesses, and secure it with the screws.
- To address the pressure switch, you will need to open the control panel. Locate the pressure switch (it will have a thin, clear tube attached to it) and disconnect the tube and wire connector.
- Replace the pressure switch, ensuring the air tube and wire connector are securely reattached.
- Reassemble the washer, reconnect the water hoses, turn the water on, plug the machine in, and run a test cycle.
- Turn the appliance off, wait about 2 minutes, then turn it back on.
Recommended Parts to Check
No exact official OEM part number is listed here because the correct Amana washer part can vary by complete model number. These are targeted part-category searches, not universal fit claims.
-
Whirlpool washer drain pumpCommon replacement category: Drain pumpFit note: Exact OEM part number varies by complete Amana washer model number. Confirm compatibility before buying.Why this category can matter: drain, no-spin, or water-removal symptoms after hose and filter checks.
-
Whirlpool washer water inlet valveCommon replacement category: Water inlet valveFit note: Exact OEM part number varies by complete Amana washer model number. Confirm compatibility before buying.Why this category can matter: fill, slow-fill, and valve-related symptoms after supply checks.
-
Whirlpool washer control boardCommon replacement category: Main control boardFit note: Exact OEM part number varies by complete Amana washer model number. Confirm compatibility before buying.Why this category can matter: repeating control or communication faults after connector checks.
Before ordering: match the part to the complete Amana washer model number on the appliance tag.
⚡ Don’t Risk a DIY Fail!
Get the ‘Secret Service Mode’ Cheat Sheet for your Amana model. Includes an easy-to-read list of every error code and quick diagnostic tips.
✅ Join 15,000+ DIYers • Instant PDF Download
Still Not Working?
If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.
Browse all Amana error codes: Amana Error Codes
When It’s Better to Replace Than Repair
Sometimes replacing an appliance makes more financial sense than putting more money into repairs.
Here are a few signs it may be time to shop for a new one:
For repair parts, verify exact fit with the full washer model number before buying; these links are general replacement-appliance shopping options.
- ✓Appliance over 8-10 years old
- ✓Repair cost over 50% of replacement
- ✓Multiple recent breakdowns
- ✓Major component failure
Recommended Replacement Options
Why Upgrade via Amazon?
- Fast, Scheduled Delivery – You pick the date and time
- Expert Installation – Professional setup available for most models
- Old Appliance Haul-away – They’ll take your broken unit when they leave
- Easy Returns – Buy with confidence from a leader in customer service
As an Amazon Associate, we earn from qualifying purchases.
Leave a Reply