⚠️ Safety Warning: Appliance repair involves electricity, gas, and moving parts. Always disconnect power before working on any appliance.
Error Code: Dishwasher Difficulty: Hard
Problem: Diverter motor fault – directs water flow between wash arms
How to Fix Dishwasher Error
- Turn off power at the circuit breaker.
- Remove the lower access panel.
- Locate the diverter motor assembly under the tub.
- Disconnect the electrical connector from the diverter motor.
- Remove the mounting screws securing the motor.
- Inspect the diverter disc for debris or damage.
- Test the motor resistance with a multimeter (should read 1500-2500 ohms).
- If faulty, install the new diverter motor assembly.
- Reconnect electrical connections and secure the mounting.
- Test the diverter operation during a wash cycle.
Recommended Replacement Part
Still Not Working?
If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.
⚡ Don’t Risk a DIY Fail!
Get the ‘Secret Service Mode’ Cheat Sheet for your Maytag model. Includes an easy-to-read list of every error code and quick diagnostic tips.
✅ Join 15,000+ DIYers • Instant PDF Download
Browse More Codes
📖 View All Error Codes
Most DIY parts are $50–$250. If you have a quote, use the total.
More options (for a better recommendation)
Expert: Mike Sullivan
EPA Section 608 Certified Technician with 18+ years experience.
Read Editorial Standards →
Leave a Reply