⚠️ Safety Warning: Appliance repair involves electricity, gas, and moving parts. Always disconnect power before working on any appliance.
Error Code: D8 AND D9 ILLUMINATED Difficulty: Moderate
Problem: Refrigerator and defrost sensor issue.
How to Fix D8 AND D9 ILLUMINATED Error (Step-by-Step)
- Disconnect the refrigerator from power to prevent electrical shock and confirm the error stays cleared during a full test cycle.
- First, replace the refrigerator sensor in the fresh food section as outlined in the ‘D8 ILLUMINATED’ repair guide.
- Next, empty the freezer and remove the rear interior panel to get to the evaporator coils.
- Locate the defrost sensor, which is a small component clipped onto the evaporator tubing.
- Disconnect the wiring and unclip the old sensor and confirm the error stays cleared during a full test cycle.
- Clip the new defrost sensor onto the tube and reconnect its wiring.
- Reinstall the freezer panel and shelving, plug the unit back in, and listen for the compressor to start.
- Turn the appliance off, wait about 2 minutes, then turn it back on.
Recommended Replacement Part
Verified Compatible Alternatives:
- WPW10384183
Still Not Working?
If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.
Most DIY parts are $50–$250. If you have a quote, use the total.
More options (for a better recommendation)
⚡ Don’t Risk a DIY Fail!
Get the ‘Secret Service Mode’ Cheat Sheet for your Amana model. Includes an easy-to-read list of every error code and quick diagnostic tips.
✅ Join 15,000+ DIYers • Instant PDF Download
Browse More Codes
📖 View All Error Codes
Expert: Mike Sullivan
EPA Section 608 Certified Technician with 18+ years experience.
Read Editorial Standards →Browse all Amana error codes: Amana Error Codes


Leave a Reply