Skip to main content
Appliance Fix Guide

GE Dryer error code

GE Dryer Error 001

Inlet thermistor failure - temperature sensor reading out of range

Inlet thermistor failure - temperature sensor reading out of range

Updated Aug 15, 2026
✅ WORTH FIXINGParts under $100
GE dryer repair guide for error 001
Error code001Dryer

Try these first

Start here before buying a part or taking the appliance apart.

  1. 1
    Check 1

    Unplug the dryer for 5 minutes to perform a hard reset.

  2. 2
    Check 2

    Unplug the unit and check the wire harness on the inlet thermistor (usually on the blower housing) for a loose or damaged connection.

  3. 3
    Check 3

    A technician can test the thermistor for resistance; an 'OL' or infinite reading confirms failure.

A quick explanation

What does 001 mean?

Inlet thermistor failure - temperature sensor reading out of range

The answer you came for

How to fix GE dryer error 001

Start with the safest checks and work from simple to technical.

  1. 1

    Step 1

    1. UNPLUG THE DRYER. This code indicates the inlet thermistor has failed (open circuit or out of range).

  2. 2

    Step 2

    2. The inlet thermistor is located on the blower housing or heater assembly. Remove the front or rear panel to access it.

  3. 3

    Step 3

    3. Disconnect the wire harness from the thermistor. Use a multimeter set to Ohms (Ω) to test its resistance.

  4. 4

    Step 4

    4. At room temperature (~77°F/25°C), it should read approximately 10,000 ohms (10kΩ). An 'open' or infinite reading (often displayed as 'OL') confirms it's bad.

  5. 5

    Step 5

    5. Unscrew the old thermistor, install the new one, reconnect the wiring, and reassemble the dryer.

Read the additional checks from the current guide

How to Fix 001 Error UNPLUG THE DRYER. This code indicates the inlet thermistor has failed (open circuit or out of range).The inlet thermistor is located on the blower housing or heater assembly. Remove the front or rear panel to access it.Disconnect the wire harness from the thermistor. Use a multimeter set to Ohms (Ω) to test its resistance.At room temperature (~77°F/25°C), it should read approximately 10,000 ohms (10kΩ). An 'open' or infinite reading (often displayed as 'OL') confirms it's bad.Unscrew the old thermistor, install the new one, reconnect the wiring, and reassemble the dryer.

If the code comes back

Do not keep replacing parts based only on the code. Repeat the safe checks above. If the fault remains, stop and arrange qualified service rather than ordering from the code alone.

What may be causing it?

  • The inlet thermistor has failed with an open circuit.
  • A broken or disconnected wire to the inlet thermistor.

These are possibilities to investigate, not proof that one part has failed.

Recommended part

Recommended part for this error code

Thermistor

OEM candidate: WE04X25996

Why this part is shown: It is associated with GE Dryer error 001 in the current guide. The error code alone does not prove this part has failed.

Compatibility varies by model. Confirm that the Amazon listing includes your complete dryer model number before ordering.

Amazon part link View recommended part on Amazon

You can open the recommendation now. Check model compatibility on the Amazon page before purchasing.

Affiliate disclosure: qualifying purchases may earn this site a commission at no additional cost to you.

Replacement options

Ready to replace your dryer?

If repairing this dryer no longer feels worthwhile, compare three replacement paths below.

Why shop your replacement on Amazon?

  • Fast, free delivery

    Prime members can get fast, free delivery on eligible items.

  • Convenient delivery options

    Select large appliances may offer scheduled or Room of Choice delivery.

  • Haul-away options

    Haul-away may be available for select appliances and delivery areas.

  • Installation help

    Installation or assembly may be available on select items.

Delivery and service options, fees, and availability vary by item, seller, and delivery ZIP code. Confirm available services at Amazon checkout.

Affiliate disclosure: qualifying purchases may earn this site a commission at no additional cost to you.

Make the money decision

Repair or replace calculator

Use the age and total repair estimate to get a simple comparison. This is guidance, not a guarantee.

Safety first

Disconnect power before opening panels or touching internal parts.

When to stop
  • Stop if you see burned wiring, melted connectors, water near electrical parts, or a gas smell.
  • Do not perform live-voltage testing unless you are trained and equipped for it.
  • Use the exact model manual or service information before replacing electronic controls.

Free quick sheet

Get the GE Dryer Error Code Quick Sheet

A concise reference with code meanings, severity, first checks, and when it is time to stop and call for service.

No spam. Unsubscribe anytime.