Skip to main content
Appliance Fix Guide

GE Dryer error code

GE Dryer Error 003

UNPLUG THE DRYER from the wall outlet to ensure safety.

UNPLUG THE DRYER from the wall outlet to ensure safety.

ModerateStart with 5-15 minutes of safe checks
✅ WORTH FIXINGParts under $100
GE dryer repair guide for error 003
Error code003Dryer

Try these first

Start here before buying a part or taking the appliance apart.

  1. 1
    UNPLUG THE DRYER from the wall outlet to

    UNPLUG THE DRYER from the wall outlet to ensure safety.

  2. 2
    The inlet thermistor is usually located on the

    The inlet thermistor is usually located on the blower housing or the heater assembly. You will need to remove the dryer's front or rear panel to access it.

  3. 3
    Disconnect the wire harness from the thermistor

    Disconnect the wire harness from the thermistor. Use a multimeter set to Ohms (Ω) to test the resistance across the two terminals.

A quick explanation

What does 003 mean?

UNPLUG THE DRYER from the wall outlet to ensure safety.

The answer you came for

How to fix GE dryer error 003

Start with the safest checks and work from simple to technical.

  1. 1

    UNPLUG THE DRYER from the wall outlet to

    UNPLUG THE DRYER from the wall outlet to ensure safety.

  2. 2

    The inlet thermistor is usually located on the

    The inlet thermistor is usually located on the blower housing or the heater assembly. You will need to remove the dryer's front or rear panel to access it.

  3. 3

    Disconnect the wire harness from the thermistor

    Disconnect the wire harness from the thermistor. Use a multimeter set to Ohms (Ω) to test the resistance across the two terminals.

  4. 4

    At room temperature (~77°F/25°C), it should read approximately

    At room temperature (~77°F/25°C), it should read approximately 10,000 ohms (10kΩ). If the reading is infinite (open circuit) or near zero (shorted), the thermistor has failed.

  5. 5

    Remove the screw holding the old thermistor, install

    Remove the screw holding the old thermistor, install the new one, and reconnect the wire harness. Reassemble the dryer panel.

Read the additional checks from the current guide

How to Fix 003 Error UNPLUG THE DRYER from the wall outlet to ensure safety.The inlet thermistor is usually located on the blower housing or the heater assembly. You will need to remove the dryer's front or rear panel to access it.Disconnect the wire harness from the thermistor. Use a multimeter set to Ohms (Ω) to test the resistance across the two terminals.At room temperature (~77°F/25°C), it should read approximately 10,000 ohms (10kΩ). If the reading is infinite (open circuit) or near zero (shorted), the thermistor has failed.Remove the screw holding the old thermistor, install the new one, and reconnect the wire harness. Reassemble the dryer panel.

If the code comes back

Do not keep replacing parts based only on the code. Repeat the safe checks above. If the fault remains, stop and arrange qualified service rather than ordering from the code alone.

Recommended part

Recommended part for this error code

Part listed in the current guide

OEM candidate: WE04X25996 (Thermistor)

Price noted in the current guide: $15-$35

Why this part is shown: It is associated with GE Dryer error 003 in the current guide. The error code alone does not prove this part has failed.

Compatibility varies by model. Confirm that the Amazon listing includes your complete dryer model number before ordering.

Amazon part link View recommended part on Amazon

You can open the recommendation now. Check model compatibility on the Amazon page before purchasing.

Affiliate disclosure: qualifying purchases may earn this site a commission at no additional cost to you.

Replacement options

Ready to replace your dryer?

If repairing this dryer no longer feels worthwhile, compare three replacement paths below.

Why shop your replacement on Amazon?

  • Fast, free delivery

    Prime members can get fast, free delivery on eligible items.

  • Convenient delivery options

    Select large appliances may offer scheduled or Room of Choice delivery.

  • Haul-away options

    Haul-away may be available for select appliances and delivery areas.

  • Installation help

    Installation or assembly may be available on select items.

Delivery and service options, fees, and availability vary by item, seller, and delivery ZIP code. Confirm available services at Amazon checkout.

Affiliate disclosure: qualifying purchases may earn this site a commission at no additional cost to you.

Make the money decision

Repair or replace calculator

Use the age and total repair estimate to get a simple comparison. This is guidance, not a guarantee.

Safety first

Disconnect power before opening panels or touching internal parts.

When to stop
  • Stop if you see burned wiring, melted connectors, water near electrical parts, or a gas smell.
  • Do not perform live-voltage testing unless you are trained and equipped for it.
  • Use the exact model manual or service information before replacing electronic controls.

Free quick sheet

Get the GE Dryer Error Code Quick Sheet

A concise reference with code meanings, severity, first checks, and when it is time to stop and call for service.

No spam. Unsubscribe anytime.