How to Fix GE Dryer Error E26

Written by

⚠️ Safety Warning: Appliance repair involves electricity, gas, and moving parts. Always disconnect power before working on any appliance.

Error Code: E26 Difficulty: Moderate

Problem: Gas flame failure – igniter lights but flame does not establish (gas dryers)

⚖️ Repair Decision

✅ WORTH FIXING

Parts under $100

How to Fix E26 Error

UNPLUG THE DRYER and SHUT OFF THE GAS SUPPLY. This is a gas flame failure error.
Remove the front panel to access the burner assembly. The three main components to check are the igniter, flame sensor, and gas valve solenoids.
Test the igniter for continuity; if it’s open, it’s bad. Test the flame sensor for continuity; it should be a closed circuit. Test the gas valve solenoids for resistance; if any are open, they are bad.
The most common failure is a weak igniter that glows but doesn’t get hot enough to open the gas valve. Replacing the igniter is the first step. If that fails, replace the flame sensor, and finally the gas valve solenoids.

OEM Part #: WE4X750 (Igniter)

Estimated Market Price: $15-$60

If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.

Get the ‘Secret Service Mode’ Cheat Sheet for your GE model. Includes an easy-to-read list of every error code and quick diagnostic tips.

✅ Join 15,000+ DIYers • Instant PDF Download

Appliance Type

Appliance Age

Estimated repair cost (parts, or parts + labor) Most DIY parts are $50–$250. If you have a quote, use the total.

Is it under warranty?

More options (for a better recommendation)

Brand

Your DIY Skill Level

EPA Section 608 Certified Technician with 18+ years experience.

Browse all Ge error codes: Ge Error Codes