Skip to main content
Appliance Fix Guide

Whirlpool Washer error code

Whirlpool Washer Error F05

Unplug washer and disconnect water supply hoses.

Unplug washer and disconnect water supply hoses.

UnknownStart with 5-15 minutes of safe checks
✅ WORTH FIXINGParts under $100
Whirlpool washer repair guide for error F05
Error codeF05Washer

Try these first

Start here before buying a part or taking the appliance apart.

  1. 1
    Unplug washer and disconnect water supply hoses

    Unplug washer and disconnect water supply hoses.

  2. 2
    Remove lower front panel to access tub area

    Remove lower front panel to access tub area.

  3. 3
    Locate temperature sensor (NTC thermistor) mounted on outer

    Locate temperature sensor (NTC thermistor) mounted on outer tub near heater element.

A quick explanation

What does F05 mean?

Unplug washer and disconnect water supply hoses.

The answer you came for

How to fix Whirlpool washer error F05

Start with the safest checks and work from simple to technical.

  1. 1

    Unplug washer and disconnect water supply hoses

    Unplug washer and disconnect water supply hoses.

  2. 2

    Remove lower front panel to access tub area

    Remove lower front panel to access tub area.

  3. 3

    Locate temperature sensor (NTC thermistor) mounted on outer

    Locate temperature sensor (NTC thermistor) mounted on outer tub near heater element.

  4. 4

    Disconnect sensor connector and measure resistance with multimeter

    Disconnect sensor connector and measure resistance with multimeter: at room temp (77°F/25°C) should read 10kΩ ±5%.

  5. 5

    Resistance should decrease as sensor warms (dip in

    Resistance should decrease as sensor warms (dip in hot water to test).

  6. 6

    If resistance is infinite or zero, replace temperature

    If resistance is infinite or zero, replace temperature sensor W

  7. 7

    Also inspect heater element terminals for corrosion

    Also inspect heater element terminals for corrosion; test heater resistance (should be 15-25 ohms).

  8. 8

    Check wiring harness between sensor and control board

    Check wiring harness between sensor and control board for damage.

  9. 9

    Reassemble and run hot water cycle to verify

    Reassemble and run hot water cycle to verify proper temperature reading.

Read the additional checks from the current guide

How to Fix Washer Error Unplug washer and disconnect water supply hoses.Remove lower front panel to access tub area.Locate temperature sensor (NTC thermistor) mounted on outer tub near heater element.Disconnect sensor connector and measure resistance with multimeter: at room temp (77°F/25°C) should read 10kΩ ±5%.Resistance should decrease as sensor warms (dip in hot water to test).If resistance is infinite or zero, replace temperature sensor WAlso inspect heater element terminals for corrosion; test heater resistance (should be 15-25 ohms).Check wiring harness between sensor and control board for damage.Reassemble and run hot water cycle to verify proper temperature reading. As an Amazon Associate, we earn from qualifying purchases through links on this page.

If the code comes back

Do not keep replacing parts based only on the code. Repeat the safe checks above. If the fault remains, stop and arrange qualified service rather than ordering from the code alone.

Recommended part

Recommended part for this error code

Part listed in the current guide

OEM candidate: W10413879

Price noted in the current guide: $45

Why this part is shown: It is associated with Whirlpool Washer error F05 in the current guide. The error code alone does not prove this part has failed.

Compatibility varies by model. Confirm that the Amazon listing includes your complete washer model number before ordering.

Amazon part link View recommended part on Amazon

You can open the recommendation now. Check model compatibility on the Amazon page before purchasing.

Affiliate disclosure: qualifying purchases may earn this site a commission at no additional cost to you.

Replacement options

Ready to replace your washer?

If repairing this washer no longer feels worthwhile, compare three replacement paths below.

Why shop your replacement on Amazon?

  • Fast, free delivery

    Prime members can get fast, free delivery on eligible items.

  • Convenient delivery options

    Select large appliances may offer scheduled or Room of Choice delivery.

  • Haul-away options

    Haul-away may be available for select appliances and delivery areas.

  • Installation help

    Installation or assembly may be available on select items.

Delivery and service options, fees, and availability vary by item, seller, and delivery ZIP code. Confirm available services at Amazon checkout.

Affiliate disclosure: qualifying purchases may earn this site a commission at no additional cost to you.

Make the money decision

Repair or replace calculator

Use the age and total repair estimate to get a simple comparison. This is guidance, not a guarantee.

Safety first

Disconnect power before opening panels or touching internal parts.

When to stop
  • Stop if you see burned wiring, melted connectors, water near electrical parts, or a gas smell.
  • Do not perform live-voltage testing unless you are trained and equipped for it.
  • Use the exact model manual or service information before replacing electronic controls.

Free quick sheet

Get the Whirlpool Washer Error Code Quick Sheet

A concise reference with code meanings, severity, first checks, and when it is time to stop and call for service.

No spam. Unsubscribe anytime.