Skip to main content
Appliance Fix Guide

Samsung Washer error code

Samsung Washer Error HC

Test heating element resistance as per HE procedure (20-30Ω normal).

Test heating element resistance as per HE procedure (20-30Ω normal).

UnknownStart with 5-15 minutes of safe checks
⚠️ CHECK WARRANTY / AGE$100 - $250 Range
Samsung washer repair guide for error HC
Error codeHCWasher

Try these first

Start here before buying a part or taking the appliance apart.

  1. 1
    Test heating element resistance as per HE procedure

    Test heating element resistance as per HE procedure (20-30Ω normal).

  2. 2
    Inspect element terminals for corrosion or loose connections

    Inspect element terminals for corrosion or loose connections (clean with wire brush if corroded).

  3. 3
    Check high-limit thermostat continuity mounted adjacent to element

    Check high-limit thermostat continuity mounted adjacent to element (should read closed at room temp, open at 185°F).

A quick explanation

What does HC mean?

Test heating element resistance as per HE procedure (20-30Ω normal).

The answer you came for

How to fix Samsung washer error HC

Start with the safest checks and work from simple to technical.

  1. 1

    Test heating element resistance as per HE procedure

    Test heating element resistance as per HE procedure (20-30Ω normal).

  2. 2

    Inspect element terminals for corrosion or loose connections

    Inspect element terminals for corrosion or loose connections (clean with wire brush if corroded).

  3. 3

    Check high-limit thermostat continuity mounted adjacent to element

    Check high-limit thermostat continuity mounted adjacent to element (should read closed at room temp, open at 185°F).

  4. 4

    Measure voltage drop across element during operation (should

    Measure voltage drop across element during operation (should see near full line voltage 110-120V AC).

  5. 5

    Replace heating element DC47-00013A if open circuit or

    Replace heating element DC47-00013A if open circuit or terminals burnt.

  6. 6

    Replace thermostat if open circuit at room temperature

    Replace thermostat if open circuit at room temperature.

  7. 7

    If element and thermostat good but no voltage

    If element and thermostat good but no voltage at terminals: replace main PCB DC92-01543A (faulty heater relay).

  8. 8

    Restart the washer and confirm the HC message

    Restart the washer and confirm the HC message returns under the same condition instead of after a one-time interruption.

  9. 9

    Check the simple causes first

    Check the simple causes first: load balance, water supply, drain flow, door or lid closure, visible leaks, and power stability.

  10. 10

    Inspect accessible wiring connectors and moisture-prone areas before

    Inspect accessible wiring connectors and moisture-prone areas before assuming the control board has failed.

  11. 11

    Use the complete Samsung washer model number from

    Use the complete Samsung washer model number from the door, lid, or rear tag before matching any pump, valve, sensor, suspension, lock, or board category.

  12. 12

    If the HC code points to a specific

    If the HC code points to a specific system, test that system directly before ordering replacement parts.

Read the additional checks from the current guide

How to Fix HC Error Test heating element resistance as per HE procedure (20-30Ω normal).Inspect element terminals for corrosion or loose connections (clean with wire brush if corroded).Check high-limit thermostat continuity mounted adjacent to element (should read closed at room temp, open at 185°F).Measure voltage drop across element during operation (should see near full line voltage 110-120V AC).Replace heating element DC47-00013A if open circuit or terminals burnt.Replace thermostat if open circuit at room temperature.If element and thermostat good but no voltage at terminals: replace main PCB DC92-01543A (faulty heater relay). Samsung Washer HC Checks Before Replacing Parts Restart the washer and confirm the HC message returns under the same condition instead of after a one-time interruption. Check the simple causes first: load balance, water supply, drain flow, door or lid closure, visible leaks, and power stability. Inspect accessible wiring connectors and moisture-prone areas before assuming the control board has failed. Use the complete Samsung washer model number from the door, lid, or rear tag before matching any pump, valve, sensor, suspension, lock, or board category. If the HC code points to a specific system, test that system directly before ordering replacement parts. Recommended Parts to Check Samsung washer parts for HC error Estimated part range: $25-$180 Confirm compatibility with your full Samsung washer model number before ordering. Check Price & Availability ->

If the code comes back

Do not keep replacing parts based only on the code. Repeat the safe checks above. If the fault remains, stop and arrange qualified service rather than ordering from the code alone.

Recommended part

Recommended part for this error code

No replacement part recommended for this code

The researched guidance for Samsung Washer error HC points to user-action and diagnostic steps above rather than a mapped replacement part. We will not invent a part or send you to an unrelated product.

Replacement options

Ready to replace your washer?

If repairing this washer no longer feels worthwhile, compare three replacement paths below.

Why shop your replacement on Amazon?

  • Fast, free delivery

    Prime members can get fast, free delivery on eligible items.

  • Convenient delivery options

    Select large appliances may offer scheduled or Room of Choice delivery.

  • Haul-away options

    Haul-away may be available for select appliances and delivery areas.

  • Installation help

    Installation or assembly may be available on select items.

Delivery and service options, fees, and availability vary by item, seller, and delivery ZIP code. Confirm available services at Amazon checkout.

Affiliate disclosure: qualifying purchases may earn this site a commission at no additional cost to you.

Make the money decision

Repair or replace calculator

Use the age and total repair estimate to get a simple comparison. This is guidance, not a guarantee.

Safety first

Disconnect power before opening panels or touching internal parts.

When to stop
  • Stop if you see burned wiring, melted connectors, water near electrical parts, or a gas smell.
  • Do not perform live-voltage testing unless you are trained and equipped for it.
  • Use the exact model manual or service information before replacing electronic controls.

Free quick sheet

Get the Samsung Washer Error Code Quick Sheet

A concise reference with code meanings, severity, first checks, and when it is time to stop and call for service.

No spam. Unsubscribe anytime.