Error Code: 0C Difficulty: Moderate
Problem: Water overflow — tub level too high
How to Fix 0C Error
- This is an ‘Overflow’ error. It means the water level sensor is malfunctioning and allowing the tub to fill with too much water.
- UNPLUG THE WASHER. Access the main control area by removing the top panel of the washer.
- Locate the water level sensor (pressure switch). It will have a thin air tube and a wire connector attached.
- Disconnect the wiring and the air tube (check the tube for blockages or kinks). Remove the old sensor and install the new one.
- Securely reattach the air tube and wire harness, then reassemble the washer.
Samsung Washer 0C Checks Before Replacing Parts
- Restart the washer and confirm the 0C message returns under the same condition instead of after a one-time interruption.
- Check the simple causes first: load balance, water supply, drain flow, door or lid closure, visible leaks, and power stability.
- Inspect accessible wiring connectors and moisture-prone areas before assuming the control board has failed.
- Use the complete Samsung washer model number from the door, lid, or rear tag before matching any pump, valve, sensor, suspension, lock, or board category.
- If the 0C code points to a specific system, test that system directly before ordering replacement parts.
Still Not Working?
If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.
When It’s Better to Replace Than Repair
Sometimes replacing an appliance makes more financial sense than putting more money into repairs.
Here are a few signs it may be time to shop for a new one:
For repair parts, verify exact fit with the full washer model number before buying; these links are general replacement-appliance shopping options.
- ✓Appliance over 8-10 years old
- ✓Repair cost over 50% of replacement
- ✓Multiple recent breakdowns
- ✓Major component failure
Recommended Replacement Options
Why Upgrade via Amazon?
- Fast, Scheduled Delivery – You pick the date and time
- Expert Installation – Professional setup available for most models
- Old Appliance Haul-away – They’ll take your broken unit when they leave
- Easy Returns – Buy with confidence from a leader in customer service
As an Amazon Associate, we earn from qualifying purchases.
Still Not Working?
If the Samsung washer 0C error returns after the basic checks, stop and recheck the full model number, the exact symptom, wiring, sensors, water or drain path, and visible component condition before buying another part.
More options (for a better recommendation)
⚡ Don’t Risk a DIY Fail!
Get the ‘Secret Service Mode’ Cheat Sheet for your Samsung model. Includes an easy-to-read list of every error code and quick diagnostic tips.
✅ Join 15,000+ DIYers • Instant PDF Download
Browse More Codes
📖 View All Error CodesExpert: Mike Sullivan
EPA Section 608 Certified Technician with 18+ years experience.
Read Editorial Standards →
Leave a Reply