Skip to main content
Appliance Fix Guide

Samsung Washer error code

Samsung Washer Error 6

UNPLUG washer from electrical power for 10 minutes to reset electronics.

UNPLUG washer from electrical power for 10 minutes to reset electronics.

HardStart with 5-15 minutes of safe checks
⚠️ CHECK WARRANTY / AGE$100 - $250 Range
Samsung washer repair guide for error 6
Error code6Washer

Try these first

Start here before buying a part or taking the appliance apart.

  1. 1
    UNPLUG washer from electrical power for 10 minutes

    UNPLUG washer from electrical power for 10 minutes to reset electronics.

  2. 2
    Remove top panel, control panel, and rear access

    Remove top panel, control panel, and rear access panel to expose all internal boards and harnesses.

  3. 3
    Reseat every wiring harness connector

    Reseat every wiring harness connector: press firmly until audible click. Focus on main board, motor, display, and sensor connections.

A quick explanation

What does 6 mean?

UNPLUG washer from electrical power for 10 minutes to reset electronics.

The answer you came for

How to fix Samsung washer error 6

Start with the safest checks and work from simple to technical.

  1. 1

    UNPLUG washer from electrical power for 10 minutes

    UNPLUG washer from electrical power for 10 minutes to reset electronics.

  2. 2

    Remove top panel, control panel, and rear access

    Remove top panel, control panel, and rear access panel to expose all internal boards and harnesses.

  3. 3

    Reseat every wiring harness connector

    Reseat every wiring harness connector: press firmly until audible click. Focus on main board, motor, display, and sensor connections.

  4. 4

    Clean all connector pins with electrical contact cleaner

    Clean all connector pins with electrical contact cleaner and lint-free swab. Allow 5 minutes drying time.

  5. 5

    Inspect entire harness routing for pinched wires, rodent

    Inspect entire harness routing for pinched wires, rodent damage, or abrasion near metal edges. Repair damaged sectons with heat-shrink tubing.

  6. 6

    If error persists after reseating

    If error persists after reseating: replace main control board using OEM part DC92-01003A.

  7. 7

    Transfer all connectors to new board one-by-one

    Transfer all connectors to new board one-by-one. Secure board with mounting screws.

  8. 8

    Restore power

    Restore power. Enter service mode per model instructions to verify communication with all subsystems.

Read the additional checks from the current guide

How to Fix 6 Error UNPLUG washer from electrical power for 10 minutes to reset electronics.Remove top panel, control panel, and rear access panel to expose all internal boards and harnesses.Reseat every wiring harness connector: press firmly until audible click. Focus on main board, motor, display, and sensor connections.Clean all connector pins with electrical contact cleaner and lint-free swab. Allow 5 minutes drying time.Inspect entire harness routing for pinched wires, rodent damage, or abrasion near metal edges. Repair damaged sectons with heat-shrink tubing.If error persists after reseating: replace main control board using OEM part DC92-01003A.Transfer all connectors to new board one-by-one. Secure board with mounting screws.Restore power. Enter service mode per model instructions to verify communication with all subsystems.

If the code comes back

Do not keep replacing parts based only on the code. Repeat the safe checks above. If the fault remains, stop and arrange qualified service rather than ordering from the code alone.

Recommended part

Recommended part for this error code

Part listed in the current guide

OEM candidate: DC92-01003A

Price noted in the current guide: $165

Why this part is shown: It is associated with Samsung Washer error 6 in the current guide. The error code alone does not prove this part has failed.

Compatibility varies by model. Confirm that the Amazon listing includes your complete washer model number before ordering.

Amazon part link View recommended part on Amazon

You can open the recommendation now. Check model compatibility on the Amazon page before purchasing.

Affiliate disclosure: qualifying purchases may earn this site a commission at no additional cost to you.

Replacement options

Ready to replace your washer?

If repairing this washer no longer feels worthwhile, compare three replacement paths below.

Why shop your replacement on Amazon?

  • Fast, free delivery

    Prime members can get fast, free delivery on eligible items.

  • Convenient delivery options

    Select large appliances may offer scheduled or Room of Choice delivery.

  • Haul-away options

    Haul-away may be available for select appliances and delivery areas.

  • Installation help

    Installation or assembly may be available on select items.

Delivery and service options, fees, and availability vary by item, seller, and delivery ZIP code. Confirm available services at Amazon checkout.

Affiliate disclosure: qualifying purchases may earn this site a commission at no additional cost to you.

Make the money decision

Repair or replace calculator

Use the age and total repair estimate to get a simple comparison. This is guidance, not a guarantee.

Safety first

Disconnect power before opening panels or touching internal parts.

When to stop
  • Stop if you see burned wiring, melted connectors, water near electrical parts, or a gas smell.
  • Do not perform live-voltage testing unless you are trained and equipped for it.
  • Use the exact model manual or service information before replacing electronic controls.

Free quick sheet

Get the Samsung Washer Error Code Quick Sheet

A concise reference with code meanings, severity, first checks, and when it is time to stop and call for service.

No spam. Unsubscribe anytime.