How to Fix Maytag Dryer Error F06

Written by

⚠️ Safety Warning: Appliance repair involves electricity, gas, and moving parts. Always disconnect power before working on any appliance.

Error Code: Dryer Difficulty: Moderate

Problem: Motor thermal overload tripped due to excessive load or failing motor

⚖️ Repair Decision

✅ WORTH FIXING

Parts under $100

How to Fix Dryer Error

Unplug dryer and remove front panel to access drum and motor.
Manually rotate drum—should turn smoothly with moderate resistance. Excessive drag indicates bearing failure or foreign object obstruction.
Remove belt and rotate drum again—if still difficult to turn, inspect drum rollers, idler pulley, and felt seals for wear/damage.
With belt removed, test motor by powering dryer briefly (CAUTION: keep hands clear)—motor should start immediately and run smoothly.
If motor hums but won’t start, test start capacitor WP3392519 (typically 5-8 MFD) with capacitance meter.
If motor runs but overheats quickly, test motor windings for proper resistance (2-6 ohms main winding, 4-8 ohms start winding).
Replace faulty component: motor WPW10438706 ($
if windings failed, or capacitor WP3392519 ($
if weak.
Reinstall belt with proper tension (idler pulley should deflect 1/2-3/4 inch when pressed).
Test full cycle monitoring for overheating.

OEM Part #: WP3392519

Estimated Market Price: $45

If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.

Get the ‘Secret Service Mode’ Cheat Sheet for your Maytag model. Includes an easy-to-read list of every error code and quick diagnostic tips.

✅ Join 15,000+ DIYers • Instant PDF Download

Appliance Type

Appliance Age

Estimated repair cost (parts, or parts + labor) Most DIY parts are $50–$250. If you have a quote, use the total.

Is it under warranty?

More options (for a better recommendation)

Brand

Your DIY Skill Level

EPA Section 608 Certified Technician with 18+ years experience.