Skip to main content
Appliance Fix Guide

Maytag Dryer error code

Maytag Dryer Error F07

Disconnect power and remove rear panel.

Disconnect power and remove rear panel.

EasyStart with 5-15 minutes of safe checks
✅ WORTH FIXINGParts under $100
Maytag dryer repair guide for error F07
Error codeF07Dryer

Try these first

Start here before buying a part or taking the appliance apart.

  1. 1
    Disconnect power and remove rear panel

    Disconnect power and remove rear panel.

  2. 2
    Locate high-limit thermostat WP3392914 mounted on heater housing

    Locate high-limit thermostat WP3392914 mounted on heater housing (typically near heating element terminals).

  3. 3
    Disconnect wiring harness and test for continuity with

    Disconnect wiring harness and test for continuity with multimeter—no continuity indicates tripped/open thermostat.

A quick explanation

What does F07 mean?

Disconnect power and remove rear panel.

The answer you came for

How to fix Maytag dryer error F07

Start with the safest checks and work from simple to technical.

  1. 1

    Disconnect power and remove rear panel

    Disconnect power and remove rear panel.

  2. 2

    Locate high-limit thermostat WP3392914 mounted on heater housing

    Locate high-limit thermostat WP3392914 mounted on heater housing (typically near heating element terminals).

  3. 3

    Disconnect wiring harness and test for continuity with

    Disconnect wiring harness and test for continuity with multimeter—no continuity indicates tripped/open thermostat.

  4. 4

    Inspect heater assembly for grounded element (element touching

    Inspect heater assembly for grounded element (element touching housing) which causes continuous heating.

  5. 5

    Check thermal fuse WP3392519 on blower housing—replace if

    Check thermal fuse WP3392519 on blower housing—replace if blown (indicates severe overheating event).

  6. 6

    Verify blower wheel is intact and rotating properly

    Verify blower wheel is intact and rotating properly (cracked wheel reduces airflow causing overheating).

  7. 7

    Replace high-limit thermostat WP

    Replace high-limit thermostat WP

  8. 8

    Reconnect wiring ensuring terminals are fully seated

    Reconnect wiring ensuring terminals are fully seated.

  9. 9

    Before reassembly, clean entire exhaust path including lint

    Before reassembly, clean entire exhaust path including lint screen housing and blower wheel.

  10. 10

    Test dryer with vent disconnected for first cycle

    Test dryer with vent disconnected for first cycle to verify proper cycling (heater should cycle on/off every 45-60 seconds).

Read the additional checks from the current guide

How to Fix Dryer Error Disconnect power and remove rear panel.Locate high-limit thermostat WP3392914 mounted on heater housing (typically near heating element terminals).Disconnect wiring harness and test for continuity with multimeter—no continuity indicates tripped/open thermostat.Inspect heater assembly for grounded element (element touching housing) which causes continuous heating.Check thermal fuse WP3392519 on blower housing—replace if blown (indicates severe overheating event).Verify blower wheel is intact and rotating properly (cracked wheel reduces airflow causing overheating).Replace high-limit thermostat WPReconnect wiring ensuring terminals are fully seated.Before reassembly, clean entire exhaust path including lint screen housing and blower wheel.Test dryer with vent disconnected for first cycle to verify proper cycling (heater should cycle on/off every 45-60 seconds). As an Amazon Associate, we earn from qualifying purchases through links on this page.

If the code comes back

Do not keep replacing parts based only on the code. Repeat the safe checks above. If the fault remains, stop and arrange qualified service rather than ordering from the code alone.

Recommended part

Recommended part for this error code

Part listed in the current guide

OEM candidate: WP3392914

Price noted in the current guide: $22

Why this part is shown: It is associated with Maytag Dryer error F07 in the current guide. The error code alone does not prove this part has failed.

Compatibility varies by model. Confirm that the Amazon listing includes your complete dryer model number before ordering.

Amazon part link View recommended part on Amazon

You can open the recommendation now. Check model compatibility on the Amazon page before purchasing.

Affiliate disclosure: qualifying purchases may earn this site a commission at no additional cost to you.

Replacement options

Ready to replace your dryer?

If repairing this dryer no longer feels worthwhile, compare three replacement paths below.

Why shop your replacement on Amazon?

  • Fast, free delivery

    Prime members can get fast, free delivery on eligible items.

  • Convenient delivery options

    Select large appliances may offer scheduled or Room of Choice delivery.

  • Haul-away options

    Haul-away may be available for select appliances and delivery areas.

  • Installation help

    Installation or assembly may be available on select items.

Delivery and service options, fees, and availability vary by item, seller, and delivery ZIP code. Confirm available services at Amazon checkout.

Affiliate disclosure: qualifying purchases may earn this site a commission at no additional cost to you.

Make the money decision

Repair or replace calculator

Use the age and total repair estimate to get a simple comparison. This is guidance, not a guarantee.

Safety first

Disconnect power before opening panels or touching internal parts.

When to stop
  • Stop if you see burned wiring, melted connectors, water near electrical parts, or a gas smell.
  • Do not perform live-voltage testing unless you are trained and equipped for it.
  • Use the exact model manual or service information before replacing electronic controls.

Free quick sheet

Get the Maytag Dryer Error Code Quick Sheet

A concise reference with code meanings, severity, first checks, and when it is time to stop and call for service.

No spam. Unsubscribe anytime.