⚠️ Safety Warning: Appliance repair involves electricity, gas, and moving parts. Always disconnect power before working on any appliance.
Error Code: Dishwasher Difficulty: Easy
Problem: Inlet water issue – electronic control doesn’t detect water entering
How to Fix Dishwasher Error
- Turn off power and water supply to the dishwasher.
- Check household water supply pressure (should be 20-120 PSI).
- Remove the lower access panel.
- Inspect the water inlet valve screen for debris or mineral buildup.
- Clean the inlet valve filter with vinegar solution and soft brush.
- Test the inlet valve solenoid with a multimeter (800-1200 ohms).
- If the valve is faulty, disconnect water supply line and electrical connector.
- Remove mounting screws and replace the water inlet valve assembly.
- Restore water and power connections.
- Test the fill cycle operation and timing.
Recommended Replacement Part
Still Not Working?
If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.
⚡ Don’t Risk a DIY Fail!
Get the ‘Secret Service Mode’ Cheat Sheet for your Maytag model. Includes an easy-to-read list of every error code and quick diagnostic tips.
✅ Join 15,000+ DIYers • Instant PDF Download
Browse More Codes
📖 View All Error Codes
Most DIY parts are $50–$250. If you have a quote, use the total.
More options (for a better recommendation)
Expert: Mike Sullivan
EPA Section 608 Certified Technician with 18+ years experience.
Read Editorial Standards →
Leave a Reply