⚠️ Safety Warning: Appliance repair involves electricity, gas, and moving parts. Always disconnect power before working on any appliance.
Error Code: Dishwasher Difficulty: Hard
Problem: Water drainage problem – slow or incomplete draining
How to Fix Dishwasher Error
- Turn off power and water supply.
- Remove the lower access panel.
- Check the drain hose routing for proper high loop installation.
- Inspect the air gap device (if equipped) for clogs.
- Remove the drain filter from the bottom of the tub and clean thoroughly.
- Access the drain pump and inspect the impeller for debris.
- Test the drain pump operation by applying power directly (with safety precautions).
- If the pump is weak or noisy, replace the drain pump assembly.
- Check the drain hose for internal collapse or restriction.
- Verify proper drain connection height.
As an Amazon Associate, we earn from qualifying purchases through links on this page.
Recommended Replacement Part
Still Not Working?
If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.
⚡ Don’t Risk a DIY Fail!
Get the ‘Secret Service Mode’ Cheat Sheet for your Maytag model. Includes an easy-to-read list of every error code and quick diagnostic tips.
✅ Join 15,000+ DIYers • Instant PDF Download
Browse More Codes
📖 View All Error Codes
Most DIY parts are $50–$250. If you have a quote, use the total.
More options (for a better recommendation)
Expert: Mike Sullivan
EPA Section 608 Certified Technician with 18+ years experience.
Read Editorial Standards →Browse all Maytag error codes: Maytag Error Codes