How to Fix Frigidaire Washer Error E44

Written by

⚠️ Safety Warning: Appliance repair involves electricity, gas, and moving parts. Always disconnect power before working on any appliance.

Error Code: E44 Difficulty: Hard

Problem: Control board problem.

⚖️ Repair Decision

⚠️ CHECK WARRANTY / AGE

$100 – $250 Range

How to Fix E44 Error (Step-by-Step)

Unplug the washer from the wall outlet and confirm the error stays cleared during a full test cycle.
Remove the top panel of the appliance by unscrewing it from the rear.
Locate the main control board. Before touching it, take a clear photograph of the wiring for reference during reassembly.
Carefully press the locking tabs on each wire connector and pull to disconnect them from the board.
Remove the screws or release the plastic tabs that hold the control board housing in place.
Swap the old board with the new one, ensuring it is properly seated.
Reconnect all wiring harnesses as per your photo, then reinstall the top panel and plug the washer in.
Turn the appliance off, wait about 2 minutes, then turn it back on.

OEM Part #: (Varies by model) (Main Control Board)

Estimated Market Price: $100-$300

Still Not Working?
If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.

Appliance Type

Appliance Age

Estimated repair cost (parts, or parts + labor) Most DIY parts are $50–$250. If you have a quote, use the total.

Is it under warranty?

More options (for a better recommendation)

Brand

Your DIY Skill Level

Get the ‘Secret Service Mode’ Cheat Sheet for your Frigidaire model. Includes an easy-to-read list of every error code and quick diagnostic tips.