⚠️ Safety Warning: Appliance repair involves electricity, gas, and moving parts. Always disconnect power before working on any appliance.
Error Code: IC2 Difficulty: Hard
Problem: Communication error with the main control board.
How to Fix IC2 Error (Step-by-Step)
- Turn off the power to the dishwasher at your home’s circuit breaker. This is a critical safety step to prevent electric shock.
- Remove the lower access panel (kickplate) of the dishwasher. It is typically held in place by two or more screws.
- Locate the main control board. It is usually housed in a plastic protective case on the right side, near the floor.
- Take a clear photo of the wire connections to the control board for reference. Carefully disconnect all wire harnesses from the old board. Most have locking tabs that need to be pressed to release.
- Remove the old control board from its housing. It may be held by plastic clips or screws.
- Install the new main control board, ensuring it is securely clipped or screwed into place. Reconnect all the wire harnesses by referring to the photo you took earlier.
- Reattach the lower access panel and restore power at the circuit breaker. Run a test cycle to confirm the repair.
- Turn the appliance off, wait about 2 minutes, then turn it back on.
Parts Availability Note: For this Electrolux/Frigidaire error code, exact OEM part numbers can vary by model revision and serial range. We’ve listed the most likely component(s), but confirm compatibility using your full model number before ordering. If no exact SKU is shown, use this guide for diagnosis first, then verify the matching OEM part on RepairClinic or PartSelect.
Still Not Working?
If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.
Most DIY parts are $50–$250. If you have a quote, use the total.
More options (for a better recommendation)
⚡ Don’t Risk a DIY Fail!
Get the ‘Secret Service Mode’ Cheat Sheet for your Electrolux model. Includes an easy-to-read list of every error code and quick diagnostic tips.
✅ Join 15,000+ DIYers • Instant PDF Download
Browse More Codes
📖 View All Error Codes
Expert: Mike Sullivan
EPA Section 608 Certified Technician with 18+ years experience.
Read Editorial Standards →Browse all Electrolux error codes: Electrolux Error Codes
Leave a Reply