⚠️ Safety Warning: Appliance repair involves electricity, gas, and moving parts. Always disconnect power before working on any appliance.
Error Code: I57 Difficulty: Moderate
Problem: Wash pump motor issue.
How to Fix I57 Error (Step-by-Step)
- Shut off both the power and the water supply to the dishwasher.
- You will need to slide the dishwasher out from under the counter. Place towels down to catch any spilled water.
- Disconnect the water inlet line, the drain hose, and the main power connection.
- Carefully lay the dishwasher on its back to access the components underneath.
- Locate the wash pump and motor assembly. Disconnect the wire harnesses and use pliers to release the clamps on the attached hoses.
- Remove the old pump assembly and install the new one (Part #154844301, #807473201, or #154853801), ensuring all hose clamps are tight and wires are securely connected.
- Tip the dishwasher upright, reconnect all lines, slide it back into place, restore power and water, and run a test cycle.
- Turn the appliance off, wait about 2 minutes, then turn it back on.
Recommended Replacement Part
Verified Compatible Alternatives:
- 154853801
- 807473201
Still Not Working?
If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.
Most DIY parts are $50–$250. If you have a quote, use the total.
More options (for a better recommendation)
⚡ Don’t Risk a DIY Fail!
Get the ‘Secret Service Mode’ Cheat Sheet for your Electrolux model. Includes an easy-to-read list of every error code and quick diagnostic tips.
✅ Join 15,000+ DIYers • Instant PDF Download
Browse More Codes
📖 View All Error Codes
Expert: Mike Sullivan
EPA Section 608 Certified Technician with 18+ years experience.
Read Editorial Standards →Browse all Electrolux error codes: Electrolux Error Codes
Leave a Reply