Category: Dishwasher

  • How to Fix Electrolux Dishwasher Error B2

    How to Fix Electrolux Dishwasher Error B2

    Error Code: B2 Difficulty: Hard

    Problem: The tank has overflowed.

    How to Fix B2 Error (Step-by-Step)

    1. An overflow condition can be caused by a few different components. First, check that the dishwasher is level, as an unlevel appliance can cause water to pool and leak.
    2. Inspect the float switch, which is located in the bottom of the dishwasher tub. Ensure it moves freely and is not stuck in the down position.
    3. If the float switch is functioning correctly, the problem may lie with the water inlet valve, which could be stuck open and allowing too much water into the dishwasher.
    4. Turn off the power to the dishwasher at the circuit breaker before attempting any repairs.
    5. You may need to replace the water inlet valve if it is faulty.
    6. Another potential cause is a faulty pressure switch, which monitors the water level in the dishwasher. If this component fails, it may not signal the inlet valve to shut off.
    7. If you are not comfortable performing these checks, it is recommended to seek professional assistance.
    8. Turn the appliance off, wait about 2 minutes, then turn it back on.

    What to Check Next on This Electrolux Dishwasher

    Focused repair path: dishwasher fill, drain, wash, heat, latch, sensor, and control checks. Do not treat the fault as reset-only if it keeps returning; use the failed function to choose the next test.

    1. Disconnect power before opening panels, then confirm whether the Electrolux dishwasher repeats the same code after a clean reset.
    2. Match the symptom to the part of the cycle or function that fails: fill, drain, heat, cool, spin, latch, ignite, fan, sensor, or control response.
    3. Inspect simple causes first: airflow, water supply, drain path, door closure, filter, venting, wiring connectors, and visible damage.
    4. Use meter testing or service diagnostics before replacing electronic controls, because wiring, switches, sensors, and loads can mimic board failure.
    5. Use the complete Electrolux dishwasher model number from the appliance tag before ordering any model-specific part.

    Check, inspect, clean, test, measure, remove, reconnect, clear, and replace parts only when the symptom supports that path. If these checks point toward a part, verify the complete Electrolux model number from the appliance tag before ordering.

    Verified Compatible Alternatives:

    • A00044305
    • A00055408

    Recommended Parts to Check

    No exact official OEM part number is listed here because the correct Electrolux dishwasher part can vary by complete model number. These are targeted part-category searches, not universal fit claims.

    • Electrolux dishwasher drain pump
      Common replacement category: Drain pump
      Fit note: Exact OEM part number varies by complete Electrolux dishwasher model number. Confirm compatibility before buying.
      Why this category can matter: standing-water, drain, and incomplete-cycle symptoms after filter and hose checks.

      Search Amazon for Electrolux dishwasher drain pump

    • Electrolux dishwasher water inlet valve
      Common replacement category: Water inlet valve
      Fit note: Exact OEM part number varies by complete Electrolux dishwasher model number. Confirm compatibility before buying.
      Why this category can matter: fill or low-water symptoms after supply and float checks.

      Search Amazon for Electrolux dishwasher water inlet valve

    • Electrolux dishwasher control board
      Common replacement category: Electronic control board
      Fit note: Exact OEM part number varies by complete Electrolux dishwasher model number. Confirm compatibility before buying.
      Why this category can matter: repeating control faults after latch, wiring, and power checks.

      Search Amazon for Electrolux dishwasher control board

    Before ordering: match the part to the complete Electrolux dishwasher model number on the appliance tag.

    Repair-Or-Replace Cost Calculator

    Use this calculator when the Electrolux dishwasher still fails after the basic checks. Compare the estimated repair cost, appliance age, and replacement price before ordering parts.


    Still Not Working?
    If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.

    Browse all Electrolux error codes: Electrolux Error Codes

    When It’s Better to Replace Than Repair

    Dishwasher repairs can add up quickly when the pump, control, heater, or leak-related parts fail.
    Confirm cabinet width, water line, drain routing, electrical connection, and panel style before ordering.
    For repair parts, verify exact fit with the full dishwasher model number before buying; these links are general replacement-appliance shopping options.

    • [OK]Drain pump or circulation pump failure
    • [OK]Leaking tub, door, or float-switch issues
    • [OK]Heater or control failures on an older unit
    • [OK]Repeated poor washing or drying performance

    Recommended Dishwasher Replacement Options

    Built-In Dishwashers

    Standard 24-Inch Models

    • Common under-counter replacement size
    • Check height, width, and toe-kick clearance
    • Match hardwire or cord connection requirements

    Shop Built-In Dishwashers

    Compact Options

    18-Inch and Small-Space Models

    • Useful for narrow cabinets
    • Confirm ADA or compact dimensions
    • Verify panel and handle clearance

    Compare Compact Dishwashers

    Portable and Countertop

    No Built-In Cabinet Cutout

    • Good for rentals or limited cabinets
    • Confirm faucet adapter compatibility
    • Measure counter or storage space

    View Portable Dishwashers

    As an Amazon Associate, we earn from qualifying purchases.

  • How to Fix Electrolux Dishwasher Error B1

    How to Fix Electrolux Dishwasher Error B1

    Error Code: B1 Difficulty: Moderate

    Problem: The drain is not efficient.

    How to Fix B1 Error (Step-by-Step)

    1. Begin by checking the dishwasher’s drain filter, located at the bottom of the tub. Remove any food particles or debris that may have accumulated.
    2. Inspect the drain hose for any kinks or clogs. The hose runs from the dishwasher to your sink’s drain or garbage disposal.
    3. Ensure the garbage disposal is clear, as a blockage there can prevent the dishwasher from draining properly. Run the disposal to clear any obstructions.
    4. Disconnect the power to the dishwasher at the circuit breaker.
    5. If the drain hose is clear, the issue may be with the drain pump. You may need to access the pump to check for blockages or damage.
    6. If the drain pump appears to be the problem, it will likely need to be replaced.
    7. After checking these components, restore power and run a drain cycle to test if the error has been cleared.
    8. Turn the appliance off, wait about 2 minutes, then turn it back on.
    Verified Compatible Alternatives:

    • A00044305
    • A00055408

    Recommended Parts to Check

    No exact official OEM part number is listed here because the correct Electrolux dishwasher part can vary by complete model number. These are targeted part-category searches, not universal fit claims.

    • Electrolux dishwasher drain pump
      Common replacement category: Drain pump
      Fit note: Exact OEM part number varies by complete Electrolux dishwasher model number. Confirm compatibility before buying.
      Why this category can matter: standing-water, drain, and incomplete-cycle symptoms after filter and hose checks.

      Search Amazon for Electrolux dishwasher drain pump

    • Electrolux dishwasher water inlet valve
      Common replacement category: Water inlet valve
      Fit note: Exact OEM part number varies by complete Electrolux dishwasher model number. Confirm compatibility before buying.
      Why this category can matter: fill or low-water symptoms after supply and float checks.

      Search Amazon for Electrolux dishwasher water inlet valve

    • Electrolux dishwasher control board
      Common replacement category: Electronic control board
      Fit note: Exact OEM part number varies by complete Electrolux dishwasher model number. Confirm compatibility before buying.
      Why this category can matter: repeating control faults after latch, wiring, and power checks.

      Search Amazon for Electrolux dishwasher control board

    Before ordering: match the part to the complete Electrolux dishwasher model number on the appliance tag.

    Repair-Or-Replace Cost Calculator

    Use this calculator when the Electrolux dishwasher still fails after the basic checks. Compare the estimated repair cost, appliance age, and replacement price before ordering parts.


    Still Not Working?
    If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.

    Browse all Electrolux error codes: Electrolux Error Codes

    When It’s Better to Replace Than Repair

    Dishwasher repairs can add up quickly when the pump, control, heater, or leak-related parts fail.
    Confirm cabinet width, water line, drain routing, electrical connection, and panel style before ordering.
    For repair parts, verify exact fit with the full dishwasher model number before buying; these links are general replacement-appliance shopping options.

    • [OK]Drain pump or circulation pump failure
    • [OK]Leaking tub, door, or float-switch issues
    • [OK]Heater or control failures on an older unit
    • [OK]Repeated poor washing or drying performance

    Recommended Dishwasher Replacement Options

    Built-In Dishwashers

    Standard 24-Inch Models

    • Common under-counter replacement size
    • Check height, width, and toe-kick clearance
    • Match hardwire or cord connection requirements

    Shop Built-In Dishwashers

    Compact Options

    18-Inch and Small-Space Models

    • Useful for narrow cabinets
    • Confirm ADA or compact dimensions
    • Verify panel and handle clearance

    Compare Compact Dishwashers

    Portable and Countertop

    No Built-In Cabinet Cutout

    • Good for rentals or limited cabinets
    • Confirm faucet adapter compatibility
    • Measure counter or storage space

    View Portable Dishwashers

    As an Amazon Associate, we earn from qualifying purchases.

  • How to Fix Electrolux Dishwasher Error A1

    How to Fix Electrolux Dishwasher Error A1

    Error Code: A1 Difficulty: Moderate

    Problem: Water is missing or there is a lack of water supply leading to poor pressure or a blockage.

    How to Fix A1 Error (Step-by-Step)

    1. First, ensure that the water supply to your dishwasher is turned on. The valve is typically located under your sink.
    2. Check the water inlet hose for any kinks or blockages that could be restricting water flow. Straighten the hose if necessary.
    3. Disconnect the power to the dishwasher at the circuit breaker for safety.
    4. Place a towel under the water inlet valve to catch any residual water.
    5. Using pliers, carefully disconnect the water inlet hose from the valve and inspect the valve’s filter screen for any debris. Clean the screen if it is clogged.
    6. If the issue persists after these steps, the water inlet valve may be faulty and require replacement.
    7. After performing these checks, reconnect the power and attempt to run a cycle to see if the error is resolved.
    8. Turn the appliance off, wait about 2 minutes, then turn it back on.
    Verified Compatible Alternatives:

    • 5304482406

    Recommended Parts to Check

    No exact official OEM part number is listed here because the correct Electrolux dishwasher part can vary by complete model number. These are targeted part-category searches, not universal fit claims.

    • Electrolux dishwasher drain pump
      Common replacement category: Drain pump
      Fit note: Exact OEM part number varies by complete Electrolux dishwasher model number. Confirm compatibility before buying.
      Why this category can matter: standing-water, drain, and incomplete-cycle symptoms after filter and hose checks.

      Search Amazon for Electrolux dishwasher drain pump

    • Electrolux dishwasher water inlet valve
      Common replacement category: Water inlet valve
      Fit note: Exact OEM part number varies by complete Electrolux dishwasher model number. Confirm compatibility before buying.
      Why this category can matter: fill or low-water symptoms after supply and float checks.

      Search Amazon for Electrolux dishwasher water inlet valve

    • Electrolux dishwasher control board
      Common replacement category: Electronic control board
      Fit note: Exact OEM part number varies by complete Electrolux dishwasher model number. Confirm compatibility before buying.
      Why this category can matter: repeating control faults after latch, wiring, and power checks.

      Search Amazon for Electrolux dishwasher control board

    Before ordering: match the part to the complete Electrolux dishwasher model number on the appliance tag.

    Repair-Or-Replace Cost Calculator

    Use this calculator when the Electrolux dishwasher still fails after the basic checks. Compare the estimated repair cost, appliance age, and replacement price before ordering parts.


    Still Not Working?
    If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.

    Browse all Electrolux error codes: Electrolux Error Codes

    When It’s Better to Replace Than Repair

    Dishwasher repairs can add up quickly when the pump, control, heater, or leak-related parts fail.
    Confirm cabinet width, water line, drain routing, electrical connection, and panel style before ordering.
    For repair parts, verify exact fit with the full dishwasher model number before buying; these links are general replacement-appliance shopping options.

    • [OK]Drain pump or circulation pump failure
    • [OK]Leaking tub, door, or float-switch issues
    • [OK]Heater or control failures on an older unit
    • [OK]Repeated poor washing or drying performance

    Recommended Dishwasher Replacement Options

    Built-In Dishwashers

    Standard 24-Inch Models

    • Common under-counter replacement size
    • Check height, width, and toe-kick clearance
    • Match hardwire or cord connection requirements

    Shop Built-In Dishwashers

    Compact Options

    18-Inch and Small-Space Models

    • Useful for narrow cabinets
    • Confirm ADA or compact dimensions
    • Verify panel and handle clearance

    Compare Compact Dishwashers

    Portable and Countertop

    No Built-In Cabinet Cutout

    • Good for rentals or limited cabinets
    • Confirm faucet adapter compatibility
    • Measure counter or storage space

    View Portable Dishwashers

    As an Amazon Associate, we earn from qualifying purchases.

  • How to Fix Electrolux Dishwasher Error 1-199

    How to Fix Electrolux Dishwasher Error 1-199

    Error Code: 1-199 Difficulty: Easy

    Problem: This number indicates the minutes remaining in the current wash cycle.

    How to Fix 1-199 Error (Step-by-Step)

    1. This is not an error code, but rather a status update on the current wash cycle.
    2. The number displayed, ranging from 1 to 199, indicates the estimated number of minutes left until the cycle is complete.
    3. This is a normal function of the dishwasher, and no action is required on your part.
    4. You can monitor this number to know when your dishes will be clean and ready.
    5. The time may fluctuate slightly depending on the soil level of your dishes and the water temperature.
    6. Once the timer reaches zero, the cycle will end, and you can safely open the dishwasher to unload your clean dishes.
    7. Turn the appliance off, wait about 2 minutes, then turn it back on.

    What to Check Next on This Electrolux Dishwasher

    Focused repair path: dishwasher fill, drain, wash, heat, latch, sensor, and control checks. Do not treat the fault as reset-only if it keeps returning; use the failed function to choose the next test.

    1. Disconnect power before opening panels, then confirm whether the Electrolux dishwasher repeats the same code after a clean reset.
    2. Match the symptom to the part of the cycle or function that fails: fill, drain, heat, cool, spin, latch, ignite, fan, sensor, or control response.
    3. Inspect simple causes first: airflow, water supply, drain path, door closure, filter, venting, wiring connectors, and visible damage.
    4. Use meter testing or service diagnostics before replacing electronic controls, because wiring, switches, sensors, and loads can mimic board failure.
    5. Use the complete Electrolux dishwasher model number from the appliance tag before ordering any model-specific part.

    Check, inspect, clean, test, measure, remove, reconnect, clear, and replace parts only when the symptom supports that path. If these checks point toward a part, verify the complete Electrolux model number from the appliance tag before ordering.

    Recommended Parts to Check

    No exact official OEM part number is listed here because the correct Electrolux dishwasher part can vary by complete model number. These are targeted part-category searches, not universal fit claims.

    • Electrolux dishwasher drain pump
      Common replacement category: Drain pump
      Fit note: Exact OEM part number varies by complete Electrolux dishwasher model number. Confirm compatibility before buying.
      Why this category can matter: standing-water, drain, and incomplete-cycle symptoms after filter and hose checks.

      Search Amazon for Electrolux dishwasher drain pump

    • Electrolux dishwasher water inlet valve
      Common replacement category: Water inlet valve
      Fit note: Exact OEM part number varies by complete Electrolux dishwasher model number. Confirm compatibility before buying.
      Why this category can matter: fill or low-water symptoms after supply and float checks.

      Search Amazon for Electrolux dishwasher water inlet valve

    • Electrolux dishwasher control board
      Common replacement category: Electronic control board
      Fit note: Exact OEM part number varies by complete Electrolux dishwasher model number. Confirm compatibility before buying.
      Why this category can matter: repeating control faults after latch, wiring, and power checks.

      Search Amazon for Electrolux dishwasher control board

    Before ordering: match the part to the complete Electrolux dishwasher model number on the appliance tag.

    Repair-Or-Replace Cost Calculator

    Use this calculator when the Electrolux dishwasher still fails after the basic checks. Compare the estimated repair cost, appliance age, and replacement price before ordering parts.


    Still Not Working?
    If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.

    Browse all Electrolux error codes: Electrolux Error Codes

    When It’s Better to Replace Than Repair

    Dishwasher repairs can add up quickly when the pump, control, heater, or leak-related parts fail.
    Confirm cabinet width, water line, drain routing, electrical connection, and panel style before ordering.
    For repair parts, verify exact fit with the full dishwasher model number before buying; these links are general replacement-appliance shopping options.

    • [OK]Drain pump or circulation pump failure
    • [OK]Leaking tub, door, or float-switch issues
    • [OK]Heater or control failures on an older unit
    • [OK]Repeated poor washing or drying performance

    Recommended Dishwasher Replacement Options

    Built-In Dishwashers

    Standard 24-Inch Models

    • Common under-counter replacement size
    • Check height, width, and toe-kick clearance
    • Match hardwire or cord connection requirements

    Shop Built-In Dishwashers

    Compact Options

    18-Inch and Small-Space Models

    • Useful for narrow cabinets
    • Confirm ADA or compact dimensions
    • Verify panel and handle clearance

    Compare Compact Dishwashers

    Portable and Countertop

    No Built-In Cabinet Cutout

    • Good for rentals or limited cabinets
    • Confirm faucet adapter compatibility
    • Measure counter or storage space

    View Portable Dishwashers

    As an Amazon Associate, we earn from qualifying purchases.

  • How to Fix Electrolux Dishwasher Error 01-24

    How to Fix Electrolux Dishwasher Error 01-24

    Error Code: 01-24 Difficulty: Easy

    Problem: The delayed start option has been activated. The number indicates the hours of delay remaining.

    How to Fix 01-24 Error (Step-by-Step)

    1. The number you see on the display, from 1 to 24, represents the number of hours remaining until the wash cycle begins.
    2. If you wish to cancel the delayed start, press the ‘Cancel’ or ‘Start/Cancel’ button on your dishwasher’s control panel.
    3. The dishwasher will then revert to its normal standby mode, ready for you to select a wash cycle.
    4. To start a wash cycle immediately, choose your desired cycle and options, then press the ‘Start’ button.
    5. If you intended to use the delayed start, no action is necessary. The dishwasher will automatically begin the cycle when the countdown reaches zero.
    6. Turn the appliance off, wait about 2 minutes, then turn it back on.
    7. Check for simple blockages (lint screen, drain path, or filter) and clean anything you find.

    What to Check Next on This Electrolux Dishwasher

    Focused repair path: dishwasher fill, drain, wash, heat, latch, sensor, and control checks. Do not treat the fault as reset-only if it keeps returning; use the failed function to choose the next test.

    1. Disconnect power before opening panels, then confirm whether the Electrolux dishwasher repeats the same code after a clean reset.
    2. Match the symptom to the part of the cycle or function that fails: fill, drain, heat, cool, spin, latch, ignite, fan, sensor, or control response.
    3. Inspect simple causes first: airflow, water supply, drain path, door closure, filter, venting, wiring connectors, and visible damage.
    4. Use meter testing or service diagnostics before replacing electronic controls, because wiring, switches, sensors, and loads can mimic board failure.
    5. Use the complete Electrolux dishwasher model number from the appliance tag before ordering any model-specific part.

    Check, inspect, clean, test, measure, remove, reconnect, clear, and replace parts only when the symptom supports that path. If these checks point toward a part, verify the complete Electrolux model number from the appliance tag before ordering.

    Recommended Parts to Check

    No exact official OEM part number is listed here because the correct Electrolux dishwasher part can vary by complete model number. These are targeted part-category searches, not universal fit claims.

    • Electrolux dishwasher drain pump
      Common replacement category: Drain pump
      Fit note: Exact OEM part number varies by complete Electrolux dishwasher model number. Confirm compatibility before buying.
      Why this category can matter: standing-water, drain, and incomplete-cycle symptoms after filter and hose checks.

      Search Amazon for Electrolux dishwasher drain pump

    • Electrolux dishwasher water inlet valve
      Common replacement category: Water inlet valve
      Fit note: Exact OEM part number varies by complete Electrolux dishwasher model number. Confirm compatibility before buying.
      Why this category can matter: fill or low-water symptoms after supply and float checks.

      Search Amazon for Electrolux dishwasher water inlet valve

    • Electrolux dishwasher control board
      Common replacement category: Electronic control board
      Fit note: Exact OEM part number varies by complete Electrolux dishwasher model number. Confirm compatibility before buying.
      Why this category can matter: repeating control faults after latch, wiring, and power checks.

      Search Amazon for Electrolux dishwasher control board

    Before ordering: match the part to the complete Electrolux dishwasher model number on the appliance tag.

    Repair-Or-Replace Cost Calculator

    Use this calculator when the Electrolux dishwasher still fails after the basic checks. Compare the estimated repair cost, appliance age, and replacement price before ordering parts.


    Still Not Working?
    If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.

    Browse all Electrolux error codes: Electrolux Error Codes

    When It’s Better to Replace Than Repair

    Dishwasher repairs can add up quickly when the pump, control, heater, or leak-related parts fail.
    Confirm cabinet width, water line, drain routing, electrical connection, and panel style before ordering.
    For repair parts, verify exact fit with the full dishwasher model number before buying; these links are general replacement-appliance shopping options.

    • [OK]Drain pump or circulation pump failure
    • [OK]Leaking tub, door, or float-switch issues
    • [OK]Heater or control failures on an older unit
    • [OK]Repeated poor washing or drying performance

    Recommended Dishwasher Replacement Options

    Built-In Dishwashers

    Standard 24-Inch Models

    • Common under-counter replacement size
    • Check height, width, and toe-kick clearance
    • Match hardwire or cord connection requirements

    Shop Built-In Dishwashers

    Compact Options

    18-Inch and Small-Space Models

    • Useful for narrow cabinets
    • Confirm ADA or compact dimensions
    • Verify panel and handle clearance

    Compare Compact Dishwashers

    Portable and Countertop

    No Built-In Cabinet Cutout

    • Good for rentals or limited cabinets
    • Confirm faucet adapter compatibility
    • Measure counter or storage space

    View Portable Dishwashers

    As an Amazon Associate, we earn from qualifying purchases.