Category: Bosch

  • How to Fix Bosch Dryer Error E11

    How to Fix Bosch Dryer Error E11

    Error Code: E11 Difficulty: Moderate

    Problem: Overheating, often due to a clogged lint filter or poor ventilation.

    How to Fix E11 Error (Step-by-Step)

    1. Unplug the dryer from the electrical outlet to ensure safety.
    2. Locate the thermal fuse, which is typically on the blower housing or the heating element housing at the back of the dryer.
    3. Disconnect the two wires attached to the thermal fuse and confirm the error stays cleared during a full test cycle.
    4. Remove the screw that holds the thermal fuse in place and remove the old fuse.
    5. Secure the new thermal fuse with the mounting screw and confirm the error stays cleared during a full test cycle.
    6. Reconnect the two wires to the new thermal fuse and confirm the error stays cleared during a full test cycle.
    7. Before reassembling, thoroughly clean the lint filter, the dryer vent, and the exhaust duct to prevent future overheating.
    8. Turn the appliance off, wait about 2 minutes, then turn it back on.

    What to Check Next on This Bosch Dryer

    Bosch Dryer Error E11: Use the code or symbol as the starting clue, then confirm the actual symptom before ordering parts.

    1. Clean the lint screen and verify the vent path has strong airflow before replacing heat or control parts.
    2. Unplug the dryer before checking the heater, thermal fuse, moisture sensor, door switch, or control harness.
    3. If the symptom repeats after airflow checks, match the repair path to what fails: no start, no heat, long dry time, sensor dry behavior, or display/control response.

    If the issue returns after these checks, match replacement parts to the complete Bosch model number from the appliance tag. The same code can point to different components depending on the exact model and when the failure appears.

    [[PART_BOX:Thermal Fuse|$10-$30|https://www.amazon.com/s?k=Thermal+Fuse%5D%5D&tag=appliancefixg-20

    When It’s Better to Replace Than Repair

    Dryer repairs are often worth it for small parts, but repeated heating, motor, drum, or control failures can point toward replacement.
    Confirm gas vs electric, venting, voltage, doorway clearance, and laundry-space dimensions before ordering.
    For repair parts, verify exact fit with the full dryer model number before buying; these links are general replacement-appliance shopping options.

    • [OK]Thermal fuse or heater failures keep returning
    • [OK]Belt, roller, or motor repairs exceed unit value
    • [OK]Door switch or control issues stack with other faults
    • [OK]Older dryer has long dry times even after vent cleaning

    Recommended Dryer Replacement Options

    Electric Dryers

    240V Vented Models

    • Most common electric replacement type
    • Confirm 3-prong vs 4-prong cord needs
    • Verify vent path and laundry-space depth

    Shop Electric Dryers

    Gas Dryers

    Natural Gas Dryer Options

    • Confirm gas supply and shutoff location
    • Use qualified installation when required
    • Do not substitute electric for gas without planning

    Compare Gas Dryers

    Compact and Ventless

    Small-Space Dryer Choices

    • Good for apartments and tight closets
    • Confirm ventless condensation requirements
    • Check capacity before replacing full-size units

    View Compact Dryers

    As an Amazon Associate, we earn from qualifying purchases.

    Still Not Working?
    If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.

    Ask a Technician Online – Get Answer in Minutes
    Find a Local Repair Pro Near You



  • How to Fix Bosch Dryer Error E12

    How to Fix Bosch Dryer Error E12

    Error Code: E12 Difficulty: Moderate

    Problem: Severe overheating, typically due to a blocked lint filter or exhaust vent.

    How to Fix E12 Error (Step-by-Step)

    1. Disconnect the dryer from its power source by unplugging it.
    2. Access the back of the dryer and locate the thermal fuse on the heating element or blower housing.
    3. Carefully detach the wires connected to the fuse and confirm the error stays cleared during a full test cycle.
    4. Unscrew the thermal fuse from its mounting and remove it.
    5. Install the new thermal fuse and secure it with the screw.
    6. Reattach the wires to the terminals of the new fuse.
    7. It is critical to clean the entire venting system, from the lint screen to the outside exhaust vent, to address the cause of the severe overheating.
    8. Turn the appliance off, wait about 2 minutes, then turn it back on.

    What to Check Next on This Bosch Dryer

    Use these checks before ordering parts for Bosch dryer E12. They keep the diagnosis tied to the appliance instead of turning the page into a reset-only guide.

    1. Unplug the dryer before touching the lint housing, rear vent, lower service area, or any wiring.
    2. Clean the lint screen, moisture sensor bars, condenser area if equipped, and the full vent path so airflow problems do not imitate part failures.
    3. Run a short timed cycle with a light load and note whether the fault appears immediately, after heating starts, or near the end of the cycle.
    4. If the fault returns with clean airflow, inspect the part categories below using the full model number from the dryer tag.
    5. Stop repeated test cycles if you smell heat, see moisture near electrical areas, or hear grinding from the drum drive.


    When It’s Better to Replace Than Repair

    Dryer repairs are often worth it for small parts, but repeated heating, motor, drum, or control failures can point toward replacement.
    Confirm gas vs electric, venting, voltage, doorway clearance, and laundry-space dimensions before ordering.
    For repair parts, verify exact fit with the full dryer model number before buying; these links are general replacement-appliance shopping options.

    • [OK]Thermal fuse or heater failures keep returning
    • [OK]Belt, roller, or motor repairs exceed unit value
    • [OK]Door switch or control issues stack with other faults
    • [OK]Older dryer has long dry times even after vent cleaning

    Recommended Dryer Replacement Options

    Electric Dryers

    240V Vented Models

    • Most common electric replacement type
    • Confirm 3-prong vs 4-prong cord needs
    • Verify vent path and laundry-space depth

    Shop Electric Dryers

    Gas Dryers

    Natural Gas Dryer Options

    • Confirm gas supply and shutoff location
    • Use qualified installation when required
    • Do not substitute electric for gas without planning

    Compare Gas Dryers

    Compact and Ventless

    Small-Space Dryer Choices

    • Good for apartments and tight closets
    • Confirm ventless condensation requirements
    • Check capacity before replacing full-size units

    View Compact Dryers

    As an Amazon Associate, we earn from qualifying purchases.

  • How to Fix Bosch Dryer Error E13

    How to Fix Bosch Dryer Error E13

    Error Code: E13 Difficulty: Hard

    Problem: Maximum drying time exceeded.

    How to Fix E13 Error (Step-by-Step)

    1. Unplug the dryer from the wall outlet and confirm the error stays cleared during a full test cycle.
    2. Remove the rear panel of the dryer to access the heating element assembly.
    3. Disconnect the wires from the heating element and the high-limit thermostat.
    4. Remove the screws holding the heating element assembly in place and slide it out.
    5. Install the new heating element assembly and secure it with the screws.
    6. Reconnect the wires to the new element and thermostat and confirm the error stays cleared during a full test cycle.
    7. If the issue persists, the thermistor or control boards may need to be replaced by a professional.
    8. Turn the appliance off, wait about 2 minutes, then turn it back on.

    What to Check Next on This Bosch Dryer

    Use these checks before ordering parts for Bosch dryer E13. They keep the diagnosis tied to the appliance instead of turning the page into a reset-only guide.

    1. Unplug the dryer before touching the lint housing, rear vent, lower service area, or any wiring.
    2. Clean the lint screen, moisture sensor bars, condenser area if equipped, and the full vent path so airflow problems do not imitate part failures.
    3. Run a short timed cycle with a light load and note whether the fault appears immediately, after heating starts, or near the end of the cycle.
    4. If the fault returns with clean airflow, inspect the part categories below using the full model number from the dryer tag.
    5. Stop repeated test cycles if you smell heat, see moisture near electrical areas, or hear grinding from the drum drive.


    When It’s Better to Replace Than Repair

    Dryer repairs are often worth it for small parts, but repeated heating, motor, drum, or control failures can point toward replacement.
    Confirm gas vs electric, venting, voltage, doorway clearance, and laundry-space dimensions before ordering.
    For repair parts, verify exact fit with the full dryer model number before buying; these links are general replacement-appliance shopping options.

    • [OK]Thermal fuse or heater failures keep returning
    • [OK]Belt, roller, or motor repairs exceed unit value
    • [OK]Door switch or control issues stack with other faults
    • [OK]Older dryer has long dry times even after vent cleaning

    Recommended Dryer Replacement Options

    Electric Dryers

    240V Vented Models

    • Most common electric replacement type
    • Confirm 3-prong vs 4-prong cord needs
    • Verify vent path and laundry-space depth

    Shop Electric Dryers

    Gas Dryers

    Natural Gas Dryer Options

    • Confirm gas supply and shutoff location
    • Use qualified installation when required
    • Do not substitute electric for gas without planning

    Compare Gas Dryers

    Compact and Ventless

    Small-Space Dryer Choices

    • Good for apartments and tight closets
    • Confirm ventless condensation requirements
    • Check capacity before replacing full-size units

    View Compact Dryers

    As an Amazon Associate, we earn from qualifying purchases.

  • How to Fix Bosch Dishwasher Error PRE-RINSE SYMBOL (SPRAY OF WATER)

    How to Fix Bosch Dishwasher Error PRE-RINSE SYMBOL (SPRAY OF WATER)

    Error Code: PRE-RINSE SYMBOL (SPRAY OF WATER) Difficulty: Easy

    Problem: The pre-rinse cycle is active.

    How to Fix PRE-RINSE SYMBOL (SPRAY OF WATER) Error (Step-by-Step)

    1. This symbol shows that the pre-rinse cycle is currently running.
    2. This is part of the normal operation to rinse dishes before the main wash cycle begins.
    3. No action is needed as this is not an error message.
    4. The dishwasher will automatically move to the main wash cycle after the pre-rinse is finished.
    5. You do not need any parts or to perform any repairs.
    6. Turn the appliance off, wait about 2 minutes, then turn it back on.
    7. Check for simple blockages (lint screen, drain path, or filter) and clean anything you find.

    What to Check Next on This Bosch Dishwasher

    Bosch Dishwasher Error PRE-RINSE SYMBOL (SPRAY OF WATER): Use the code, light, or symbol as the starting clue, then confirm what the dishwasher actually does before ordering parts.

    1. 1. Turn power off before opening panels, reaching into the sump, touching wiring, or checking the pump, heater, valve, sensor, latch, or control area.
    2. 2. Confirm whether the display is a normal cycle/status symbol or a recurring fault that interrupts filling, washing, draining, drying, locking, or control response.
    3. 3. Start with the fill path: water supply, inlet screen, hose position, float or level sensing, inlet valve wiring, and control output.
    4. 4. Clean the filter and sump, check spray-arm movement, verify water supply, inspect the drain hose and sink connection, and correct any visible blockage before replacing parts.
    5. 5. Run a short test cycle and watch where it fails; the exact stage matters more than the displayed word or symbol by itself.
    6. 6. Replace a part only after the same symptom repeats and the model-specific checks point to that part category. Match any replacement to the complete Bosch model number on the door tag.

    If the issue returns after these checks, match replacement parts to the complete Bosch dishwasher model number from the door tag. The same display clue can point to different components depending on the exact model and when the failure appears.

    Recommended Parts to Check

    No exact official OEM part number is listed here because the correct Bosch dishwasher part can vary by complete model number. These are targeted part-category searches, not universal fit claims.

    • Bosch dishwasher water inlet valve
      Common replacement category: Water inlet valve
      Fit note: Exact OEM part number varies by full Bosch dishwasher model number. Confirm compatibility before buying.
      Confidence: Medium
      This category can be relevant for fill and water-supply faults after the tap, hose, and inlet screen are checked.

      Search Amazon for Bosch dishwasher water inlet valve

    • Bosch dishwasher drain pump
      Common replacement category: Drain pump
      Fit note: Exact OEM part number varies by full Bosch dishwasher model number. Confirm compatibility before buying.
      Confidence: Medium
      This category can be relevant for drain and standing-water symptoms after the filter, sump, and hose are checked.

      Search Amazon for Bosch dishwasher drain pump

    • Bosch dishwasher circulation pump
      Common replacement category: Circulation pump / wash motor
      Fit note: Exact OEM part number varies by full Bosch dishwasher model number. Confirm compatibility before buying.
      Confidence: Medium
      This category can be relevant for wash, spray-arm, and circulation symptoms after filters and spray arms are checked.

      Search Amazon for Bosch dishwasher circulation pump

    Before ordering: match the part to the complete Bosch dishwasher model number on the appliance tag.

    Still Not Working?
    If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.

    Ask a Technician Online – Get Answer in Minutes
    Find a Local Repair Pro Near You


    When It’s Better to Replace Than Repair

    Dishwasher repairs can add up quickly when the pump, control, heater, or leak-related parts fail.
    Confirm cabinet width, water line, drain routing, electrical connection, and panel style before ordering.
    For repair parts, verify exact fit with the full dishwasher model number before buying; these links are general replacement-appliance shopping options.

    • [OK]Drain pump or circulation pump failure
    • [OK]Leaking tub, door, or float-switch issues
    • [OK]Heater or control failures on an older unit
    • [OK]Repeated poor washing or drying performance

    Recommended Dishwasher Replacement Options

    Built-In Dishwashers

    Standard 24-Inch Models

    • Common under-counter replacement size
    • Check height, width, and toe-kick clearance
    • Match hardwire or cord connection requirements

    Shop Built-In Dishwashers

    Compact Options

    18-Inch and Small-Space Models

    • Useful for narrow cabinets
    • Confirm ADA or compact dimensions
    • Verify panel and handle clearance

    Compare Compact Dishwashers

    Portable and Countertop

    No Built-In Cabinet Cutout

    • Good for rentals or limited cabinets
    • Confirm faucet adapter compatibility
    • Measure counter or storage space

    View Portable Dishwashers

    As an Amazon Associate, we earn from qualifying purchases.

  • How to Fix Bosch Dishwasher Error MACHINE CARE SYMBOL

    How to Fix Bosch Dishwasher Error MACHINE CARE SYMBOL

    Error Code: MACHINE CARE SYMBOL Difficulty: Easy

    Problem: It is time to run the “Machine Care” cleaning cycle.

    How to Fix MACHINE CARE SYMBOL Error (Step-by-Step)

    1. This light is a reminder to run the ‘Machine Care’ cleaning cycle.
    2. Make sure the dishwasher is empty of all dishes and confirm the error stays cleared during a full test cycle.
    3. Add a dishwasher cleaning tablet or liquid cleaner as recommended by the manufacturer.
    4. Close the door and select the ‘Machine Care’ cycle and confirm the error stays cleared during a full test cycle.
    5. Press the ‘Start’ button to begin the cleaning process and confirm the error stays cleared during a full test cycle.
    6. The light will turn off once the cycle is complete.
    7. Turn the appliance off, wait about 2 minutes, then turn it back on.

    What to Check Next on This Bosch Dishwasher

    Machine Care symbol: Machine Care is a cleaning reminder or program. It does not by itself prove a failed part, but ignored buildup can cause real wash or drain symptoms.

    1. Run the Machine Care program with the dishwasher empty and clean the filter before the cycle if debris is visible.
    2. Inspect the sump, spray-arm holes, and door gasket for grease or mineral buildup that can reduce water movement.
    3. If the reminder returns immediately or the dishwasher still drains or washes poorly, move from cleaning maintenance to drain pump, circulation, sensor, or control checks.

    If the symptom returns after these checks, use the full Bosch model number from the door tag before ordering any part. The same display message can point to different parts depending on the exact model and what the dishwasher does during fill, wash, drain, or dry.

    Recommended Parts to Check

    No exact official OEM part number is listed here because the correct Bosch dishwasher part can vary by complete model number. These are targeted part-category searches, not universal fit claims.

    • Bosch dishwasher water inlet valve
      Common replacement category: Water inlet valve
      Fit note: Exact OEM part number varies by full Bosch dishwasher model number. Confirm compatibility before buying.
      Confidence: Medium
      This category can be relevant for fill and water-supply faults after the tap, hose, and inlet screen are checked.

      Search Amazon for Bosch dishwasher water inlet valve

    • Bosch dishwasher drain pump
      Common replacement category: Drain pump
      Fit note: Exact OEM part number varies by full Bosch dishwasher model number. Confirm compatibility before buying.
      Confidence: Medium
      This category can be relevant for drain and standing-water symptoms after the filter, sump, and hose are checked.

      Search Amazon for Bosch dishwasher drain pump

    • Bosch dishwasher circulation pump
      Common replacement category: Circulation pump / wash motor
      Fit note: Exact OEM part number varies by full Bosch dishwasher model number. Confirm compatibility before buying.
      Confidence: Medium
      This category can be relevant for wash, spray-arm, and circulation symptoms after filters and spray arms are checked.

      Search Amazon for Bosch dishwasher circulation pump

    Before ordering: match the part to the complete Bosch dishwasher model number on the appliance tag.

    Still Not Working?
    If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.

    Ask a Technician Online – Get Answer in Minutes
    Find a Local Repair Pro Near You


    When It’s Better to Replace Than Repair

    Dishwasher repairs can add up quickly when the pump, control, heater, or leak-related parts fail.
    Confirm cabinet width, water line, drain routing, electrical connection, and panel style before ordering.
    For repair parts, verify exact fit with the full dishwasher model number before buying; these links are general replacement-appliance shopping options.

    • [OK]Drain pump or circulation pump failure
    • [OK]Leaking tub, door, or float-switch issues
    • [OK]Heater or control failures on an older unit
    • [OK]Repeated poor washing or drying performance

    Recommended Dishwasher Replacement Options

    Built-In Dishwashers

    Standard 24-Inch Models

    • Common under-counter replacement size
    • Check height, width, and toe-kick clearance
    • Match hardwire or cord connection requirements

    Shop Built-In Dishwashers

    Compact Options

    18-Inch and Small-Space Models

    • Useful for narrow cabinets
    • Confirm ADA or compact dimensions
    • Verify panel and handle clearance

    Compare Compact Dishwashers

    Portable and Countertop

    No Built-In Cabinet Cutout

    • Good for rentals or limited cabinets
    • Confirm faucet adapter compatibility
    • Measure counter or storage space

    View Portable Dishwashers

    As an Amazon Associate, we earn from qualifying purchases.

  • How to Fix Bosch Dishwasher Error BRUSH SYMBOL

    How to Fix Bosch Dishwasher Error BRUSH SYMBOL

    Error Code: BRUSH SYMBOL Difficulty: Easy

    Problem: The dishwasher is currently in the washing cycle.

    How to Fix BRUSH SYMBOL Error (Step-by-Step)

    1. This symbol means the dishwasher is in the middle of a wash cycle.
    2. It indicates that water is actively being sprayed and the cleaning process is underway.
    3. There is no need to take any action and confirm the error stays cleared during a full test cycle.
    4. Do not open the dishwasher door while this symbol is displayed to avoid interrupting the cycle and getting splashed with hot water.
    5. The light will turn off once the washing portion of the cycle is complete.
    6. Turn the appliance off, wait about 2 minutes, then turn it back on.
    7. Check for simple blockages (lint screen, drain path, or filter) and clean anything you find.

    What to Check Next on This Bosch Dishwasher

    Brush symbol: The brush light normally means the wash portion is active. It becomes a repair clue only when the machine hangs there or stops washing.

    1. Wait for the wash section to finish before interrupting the cycle, because opening the door can pause or extend the program.
    2. If the brush light stays on too long, check that the spray arms turn freely and the filter area is clear of debris.
    3. If the pump hums, spray is weak, or dishes stay dry, inspect circulation flow, water level, and wiring before replacing a wash motor or control.

    If the symptom returns after these checks, use the full Bosch model number from the door tag before ordering any part. The same display message can point to different parts depending on the exact model and what the dishwasher does during fill, wash, drain, or dry.

    Recommended Parts to Check

    No exact official OEM part number is listed here because the correct Bosch dishwasher part can vary by complete model number. These are targeted part-category searches, not universal fit claims.

    • Bosch dishwasher water inlet valve
      Common replacement category: Water inlet valve
      Fit note: Exact OEM part number varies by full Bosch dishwasher model number. Confirm compatibility before buying.
      Confidence: Medium
      This category can be relevant for fill and water-supply faults after the tap, hose, and inlet screen are checked.

      Search Amazon for Bosch dishwasher water inlet valve

    • Bosch dishwasher drain pump
      Common replacement category: Drain pump
      Fit note: Exact OEM part number varies by full Bosch dishwasher model number. Confirm compatibility before buying.
      Confidence: Medium
      This category can be relevant for drain and standing-water symptoms after the filter, sump, and hose are checked.

      Search Amazon for Bosch dishwasher drain pump

    • Bosch dishwasher circulation pump
      Common replacement category: Circulation pump / wash motor
      Fit note: Exact OEM part number varies by full Bosch dishwasher model number. Confirm compatibility before buying.
      Confidence: Medium
      This category can be relevant for wash, spray-arm, and circulation symptoms after filters and spray arms are checked.

      Search Amazon for Bosch dishwasher circulation pump

    Before ordering: match the part to the complete Bosch dishwasher model number on the appliance tag.

    Still Not Working?
    If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.

    Ask a Technician Online – Get Answer in Minutes
    Find a Local Repair Pro Near You


    When It’s Better to Replace Than Repair

    Dishwasher repairs can add up quickly when the pump, control, heater, or leak-related parts fail.
    Confirm cabinet width, water line, drain routing, electrical connection, and panel style before ordering.
    For repair parts, verify exact fit with the full dishwasher model number before buying; these links are general replacement-appliance shopping options.

    • [OK]Drain pump or circulation pump failure
    • [OK]Leaking tub, door, or float-switch issues
    • [OK]Heater or control failures on an older unit
    • [OK]Repeated poor washing or drying performance

    Recommended Dishwasher Replacement Options

    Built-In Dishwashers

    Standard 24-Inch Models

    • Common under-counter replacement size
    • Check height, width, and toe-kick clearance
    • Match hardwire or cord connection requirements

    Shop Built-In Dishwashers

    Compact Options

    18-Inch and Small-Space Models

    • Useful for narrow cabinets
    • Confirm ADA or compact dimensions
    • Verify panel and handle clearance

    Compare Compact Dishwashers

    Portable and Countertop

    No Built-In Cabinet Cutout

    • Good for rentals or limited cabinets
    • Confirm faucet adapter compatibility
    • Measure counter or storage space

    View Portable Dishwashers

    As an Amazon Associate, we earn from qualifying purchases.

  • How to Fix Bosch Dishwasher Error ECO CYCLE SYMBOL (LEAF)

    How to Fix Bosch Dishwasher Error ECO CYCLE SYMBOL (LEAF)

    Error Code: ECO CYCLE SYMBOL (LEAF) Difficulty: Easy

    Problem: The energy-saving eco cycle is selected.

    How to Fix ECO CYCLE SYMBOL (LEAF) Error (Step-by-Step)

    1. This symbol means the eco-friendly cycle is selected, which uses less water and energy.
    2. This is a normal operation indicator, not an error code.
    3. If you want a different cycle, press the ‘Cycle’ or ‘Program’ button to choose another option like ‘Normal’ or ‘Intensive’.
    4. The dishwasher will start the new cycle you’ve selected and confirm the error stays cleared during a full test cycle.
    5. No repair or parts are needed for this and confirm the error stays cleared during a full test cycle.
    6. Turn the appliance off, wait about 2 minutes, then turn it back on.
    7. Check for simple blockages (lint screen, drain path, or filter) and clean anything you find.

    What to Check Next on This Bosch Dishwasher

    Bosch Dishwasher Error ECO CYCLE SYMBOL (LEAF): Use the code, light, or symbol as the starting clue, then confirm what the dishwasher actually does before ordering parts.

    1. 1. Turn power off before opening panels, reaching into the sump, touching wiring, or checking the pump, heater, valve, sensor, latch, or control area.
    2. 2. Confirm whether the display is a normal cycle/status symbol or a recurring fault that interrupts filling, washing, draining, drying, locking, or control response.
    3. 3. Start with the wash path: filter, sump debris, spray-arm movement, circulation-pump sound, wiring, and control output.
    4. 4. Clean the filter and sump, check spray-arm movement, verify water supply, inspect the drain hose and sink connection, and correct any visible blockage before replacing parts.
    5. 5. Run a short test cycle and watch where it fails; the exact stage matters more than the displayed word or symbol by itself.
    6. 6. Replace a part only after the same symptom repeats and the model-specific checks point to that part category. Match any replacement to the complete Bosch model number on the door tag.

    If the issue returns after these checks, match replacement parts to the complete Bosch dishwasher model number from the door tag. The same display clue can point to different components depending on the exact model and when the failure appears.

    Recommended Parts to Check

    No exact official OEM part number is listed here because the correct Bosch dishwasher part can vary by complete model number. These are targeted part-category searches, not universal fit claims.

    • Bosch dishwasher water inlet valve
      Common replacement category: Water inlet valve
      Fit note: Exact OEM part number varies by full Bosch dishwasher model number. Confirm compatibility before buying.
      Confidence: Medium
      This category can be relevant for fill and water-supply faults after the tap, hose, and inlet screen are checked.

      Search Amazon for Bosch dishwasher water inlet valve

    • Bosch dishwasher drain pump
      Common replacement category: Drain pump
      Fit note: Exact OEM part number varies by full Bosch dishwasher model number. Confirm compatibility before buying.
      Confidence: Medium
      This category can be relevant for drain and standing-water symptoms after the filter, sump, and hose are checked.

      Search Amazon for Bosch dishwasher drain pump

    • Bosch dishwasher circulation pump
      Common replacement category: Circulation pump / wash motor
      Fit note: Exact OEM part number varies by full Bosch dishwasher model number. Confirm compatibility before buying.
      Confidence: Medium
      This category can be relevant for wash, spray-arm, and circulation symptoms after filters and spray arms are checked.

      Search Amazon for Bosch dishwasher circulation pump

    Before ordering: match the part to the complete Bosch dishwasher model number on the appliance tag.

    Still Not Working?
    If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.

    Ask a Technician Online – Get Answer in Minutes
    Find a Local Repair Pro Near You


    When It’s Better to Replace Than Repair

    Dishwasher repairs can add up quickly when the pump, control, heater, or leak-related parts fail.
    Confirm cabinet width, water line, drain routing, electrical connection, and panel style before ordering.
    For repair parts, verify exact fit with the full dishwasher model number before buying; these links are general replacement-appliance shopping options.

    • [OK]Drain pump or circulation pump failure
    • [OK]Leaking tub, door, or float-switch issues
    • [OK]Heater or control failures on an older unit
    • [OK]Repeated poor washing or drying performance

    Recommended Dishwasher Replacement Options

    Built-In Dishwashers

    Standard 24-Inch Models

    • Common under-counter replacement size
    • Check height, width, and toe-kick clearance
    • Match hardwire or cord connection requirements

    Shop Built-In Dishwashers

    Compact Options

    18-Inch and Small-Space Models

    • Useful for narrow cabinets
    • Confirm ADA or compact dimensions
    • Verify panel and handle clearance

    Compare Compact Dishwashers

    Portable and Countertop

    No Built-In Cabinet Cutout

    • Good for rentals or limited cabinets
    • Confirm faucet adapter compatibility
    • Measure counter or storage space

    View Portable Dishwashers

    As an Amazon Associate, we earn from qualifying purchases.

  • How to Fix Bosch Dishwasher Error AUTO CYCLE SYMBOL

    How to Fix Bosch Dishwasher Error AUTO CYCLE SYMBOL

    Error Code: AUTO CYCLE SYMBOL Difficulty: Easy

    Problem: The automatic wash cycle is selected.

    How to Fix AUTO CYCLE SYMBOL Error (Step-by-Step)

    1. This symbol indicates that the automatic wash cycle is currently selected.
    2. The dishwasher’s sensors will now adjust the cycle time, temperature, and water usage based on how dirty the dishes are.
    3. No action is required from you and confirm the error stays cleared during a full test cycle.
    4. The dishwasher will proceed with the selected automatic cycle and confirm the error stays cleared during a full test cycle.
    5. Simply allow the dishwasher to complete its cycle and confirm the error stays cleared during a full test cycle.
    6. Turn the appliance off, wait about 2 minutes, then turn it back on.
    7. Check for simple blockages (lint screen, drain path, or filter) and clean anything you find.

    What to Check Next on This Bosch Dishwasher

    Bosch Dishwasher Error AUTO CYCLE SYMBOL: Use the code, light, or symbol as the starting clue, then confirm what the dishwasher actually does before ordering parts.

    1. 1. Turn power off before opening panels, reaching into the sump, touching wiring, or checking the pump, heater, valve, sensor, latch, or control area.
    2. 2. Confirm whether the display is a normal cycle/status symbol or a recurring fault that interrupts filling, washing, draining, drying, locking, or control response.
    3. 3. Start with the wash path: filter, sump debris, spray-arm movement, circulation-pump sound, wiring, and control output.
    4. 4. Clean the filter and sump, check spray-arm movement, verify water supply, inspect the drain hose and sink connection, and correct any visible blockage before replacing parts.
    5. 5. Run a short test cycle and watch where it fails; the exact stage matters more than the displayed word or symbol by itself.
    6. 6. Replace a part only after the same symptom repeats and the model-specific checks point to that part category. Match any replacement to the complete Bosch model number on the door tag.

    If the issue returns after these checks, match replacement parts to the complete Bosch dishwasher model number from the door tag. The same display clue can point to different components depending on the exact model and when the failure appears.

    Recommended Parts to Check

    No exact official OEM part number is listed here because the correct Bosch dishwasher part can vary by complete model number. These are targeted part-category searches, not universal fit claims.

    • Bosch dishwasher water inlet valve
      Common replacement category: Water inlet valve
      Fit note: Exact OEM part number varies by full Bosch dishwasher model number. Confirm compatibility before buying.
      Confidence: Medium
      This category can be relevant for fill and water-supply faults after the tap, hose, and inlet screen are checked.

      Search Amazon for Bosch dishwasher water inlet valve

    • Bosch dishwasher drain pump
      Common replacement category: Drain pump
      Fit note: Exact OEM part number varies by full Bosch dishwasher model number. Confirm compatibility before buying.
      Confidence: Medium
      This category can be relevant for drain and standing-water symptoms after the filter, sump, and hose are checked.

      Search Amazon for Bosch dishwasher drain pump

    • Bosch dishwasher circulation pump
      Common replacement category: Circulation pump / wash motor
      Fit note: Exact OEM part number varies by full Bosch dishwasher model number. Confirm compatibility before buying.
      Confidence: Medium
      This category can be relevant for wash, spray-arm, and circulation symptoms after filters and spray arms are checked.

      Search Amazon for Bosch dishwasher circulation pump

    Before ordering: match the part to the complete Bosch dishwasher model number on the appliance tag.

    Still Not Working?
    If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.

    Ask a Technician Online – Get Answer in Minutes
    Find a Local Repair Pro Near You


    When It’s Better to Replace Than Repair

    Dishwasher repairs can add up quickly when the pump, control, heater, or leak-related parts fail.
    Confirm cabinet width, water line, drain routing, electrical connection, and panel style before ordering.
    For repair parts, verify exact fit with the full dishwasher model number before buying; these links are general replacement-appliance shopping options.

    • [OK]Drain pump or circulation pump failure
    • [OK]Leaking tub, door, or float-switch issues
    • [OK]Heater or control failures on an older unit
    • [OK]Repeated poor washing or drying performance

    Recommended Dishwasher Replacement Options

    Built-In Dishwashers

    Standard 24-Inch Models

    • Common under-counter replacement size
    • Check height, width, and toe-kick clearance
    • Match hardwire or cord connection requirements

    Shop Built-In Dishwashers

    Compact Options

    18-Inch and Small-Space Models

    • Useful for narrow cabinets
    • Confirm ADA or compact dimensions
    • Verify panel and handle clearance

    Compare Compact Dishwashers

    Portable and Countertop

    No Built-In Cabinet Cutout

    • Good for rentals or limited cabinets
    • Confirm faucet adapter compatibility
    • Measure counter or storage space

    View Portable Dishwashers

    As an Amazon Associate, we earn from qualifying purchases.

  • How to Fix Bosch Refrigerator Error LOCK

    How to Fix Bosch Refrigerator Error LOCK

    Error Code: LOCK Difficulty: Easy

    Problem: The lock for changing settings is enabled.

    How to Fix LOCK Error (Step-by-Step)

    1. Locate the ‘Lock’ button on your refrigerator’s control panel. It may be labeled with a key or a lock symbol.
    2. Press and hold the ‘Lock’ button for three to five seconds.
    3. You should hear a beep or see the lock symbol disappear from the display, indicating the control panel is unlocked.
    4. If holding the ‘Lock’ button does not work, try pressing and holding the ‘Options’ or a similarly named button, as the lock function can sometimes be a secondary feature.
    5. If the lock persists, unplug the refrigerator from the power outlet for 5-10 minutes to perform a soft reset.
    6. Plug the refrigerator back in. The control lock should now be disengaged.
    7. Turn the appliance off, wait about 2 minutes, then turn it back on.

    What to Check Next on This Bosch Refrigerator

    Bosch Refrigerator Error LOCK: Use the code or symbol as the starting clue, then confirm the actual symptom before ordering parts.

    1. Confirm the doors seal fully, vents are open, and temperatures have had enough time to stabilize after any setting change.
    2. Check for frost buildup, blocked airflow, fan noise, loose sensor wiring, and dirty condenser areas before replacing electronics.
    3. If the alarm or code returns, use the model number to test the matching sensor, fan, defrost, or control circuit instead of guessing at parts.

    If the issue returns after these checks, match replacement parts to the complete Bosch model number from the appliance tag. The same code can point to different components depending on the exact model and when the failure appears.

    Recommended Parts to Check

    No exact official OEM part number is listed here because the correct Bosch refrigerator part can vary by complete model number. These are targeted part-category searches, not universal fit claims.

    • Bosch refrigerator temperature sensor
      Common replacement category: Temperature sensor / thermistor
      Fit note: Exact OEM part number varies by full Bosch refrigerator model number. Confirm compatibility before buying.
      Confidence: Medium
      This category can be relevant for temperature, alarm, and cooling-sensor faults after the door seal, vents, and settings are checked.

      Search Amazon for Bosch refrigerator temperature sensor

    • Bosch refrigerator evaporator fan motor
      Common replacement category: Evaporator fan motor
      Fit note: Exact OEM part number varies by full Bosch refrigerator model number. Confirm compatibility before buying.
      Confidence: Medium
      This category can be relevant for airflow, fan, and uneven-cooling symptoms after ice buildup and obstructions are ruled out.

      Search Amazon for Bosch refrigerator evaporator fan motor

    • Bosch refrigerator electronic control board
      Common replacement category: Main electronic control board
      Fit note: Exact OEM part number varies by full Bosch refrigerator model number. Confirm compatibility before buying.
      Confidence: Medium
      This category can be relevant for repeated electronic, display, or cooling-control faults after connectors and power are checked.

      Search Amazon for Bosch refrigerator electronic control board

    Before ordering: match the part to the complete Bosch refrigerator model number on the appliance tag.

    Still Not Working?
    If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.

    Ask a Technician Online – Get Answer in Minutes
    Find a Local Repair Pro Near You


    When It’s Better to Replace Than Repair

    Refrigerator repairs can become costly when sealed-system, control, defrost, fan, or ice-maker issues repeat.
    Confirm width, height, depth, door swing, counter-depth needs, water line, and delivery path before ordering.
    For repair parts, verify exact fit with the full refrigerator model number before buying; these links are general replacement-appliance shopping options.

    • [OK]Water inlet valve, ice maker, or fan failures keep returning
    • [OK]Defrost heater, thermostat, or sensor faults stack up
    • [OK]Compressor or sealed-system repair is not economical
    • [OK]Food-loss risk is becoming a pattern

    Recommended Refrigerator Replacement Options

    Top-Freezer Models

    Simple Full-Size Replacements

    • Usually lower cost and easy to service
    • Confirm hinge side and kitchen clearance
    • Measure width, depth, and height

    Shop Top-Freezer Refrigerators

    Side-by-Side

    Ice and Water Convenience

    • Good for narrow door swing spaces
    • Confirm water line and filter access
    • Check freezer width for large items

    Compare Side-by-Side Models

    French-Door

    Premium Kitchen Layout

    • Popular wide fresh-food access
    • Confirm drawer clearance and counter depth
    • Measure delivery path before ordering

    View French-Door Refrigerators

    As an Amazon Associate, we earn from qualifying purchases.

  • How to Fix Bosch Refrigerator Error E11

    How to Fix Bosch Refrigerator Error E11

    Error Code: E11 Difficulty: Moderate

    Problem: Display control module is defective.

    How to Fix E11 Error (Step-by-Step)

    1. Turn off power to the refrigerator at your home’s circuit breaker.
    2. The display control module is located in the dispenser area on the front of the door. Use a plastic putty knife or trim removal tool to gently pry the dispenser’s outer cover off.
    3. With the cover removed, you will see the display module. Take a photo of how the wires are connected.
    4. Disconnect the wire harnesses attached to the back of the old display module.
    5. Remove the screws holding the module in place and swap it with the new one.
    6. Reconnect the wire harnesses to the new module based on your reference photo.
    7. Carefully snap the dispenser cover back into place and restore power at the circuit breaker to test the new display.
    8. Turn the appliance off, wait about 2 minutes, then turn it back on.

    What to Check Next on This Bosch Refrigerator

    Bosch Refrigerator Error E11: Use the code, light, or symbol as the starting clue, then confirm what the refrigerator actually does before ordering parts.

    1. 1. Unplug the refrigerator before removing covers, touching wiring, checking fans, sensors, valves, or control boards.
    2. 2. Confirm whether the display is a normal mode/status symbol or a recurring fault that affects cooling, alarms, lights, water, or controls.
    3. 3. Start with the exact symptom and the stage where it appears: cooling, airflow, defrost, water, door sealing, sensor reading, or control response.
    4. 4. Check door gaskets, blocked vents, condenser dust, frost buildup, fan noise, temperature settings, and recent door-open events before replacing parts.
    5. 5. Let temperatures stabilize after corrections, then confirm whether the same code, alarm, or symptom returns under normal use.
    6. 6. Replace a part only after the same symptom repeats and the model-specific checks point to that part category. Match any replacement to the complete Bosch model number on the appliance tag.

    If the issue returns after these checks, match replacement parts to the complete Bosch refrigerator model number from the appliance tag. The same display clue can point to different components depending on the exact model and when the failure appears.


    When It’s Better to Replace Than Repair

    Refrigerator repairs can become costly when sealed-system, control, defrost, fan, or ice-maker issues repeat.
    Confirm width, height, depth, door swing, counter-depth needs, water line, and delivery path before ordering.
    For repair parts, verify exact fit with the full refrigerator model number before buying; these links are general replacement-appliance shopping options.

    • [OK]Water inlet valve, ice maker, or fan failures keep returning
    • [OK]Defrost heater, thermostat, or sensor faults stack up
    • [OK]Compressor or sealed-system repair is not economical
    • [OK]Food-loss risk is becoming a pattern

    Recommended Refrigerator Replacement Options

    Top-Freezer Models

    Simple Full-Size Replacements

    • Usually lower cost and easy to service
    • Confirm hinge side and kitchen clearance
    • Measure width, depth, and height

    Shop Top-Freezer Refrigerators

    Side-by-Side

    Ice and Water Convenience

    • Good for narrow door swing spaces
    • Confirm water line and filter access
    • Check freezer width for large items

    Compare Side-by-Side Models

    French-Door

    Premium Kitchen Layout

    • Popular wide fresh-food access
    • Confirm drawer clearance and counter depth
    • Measure delivery path before ordering

    View French-Door Refrigerators

    As an Amazon Associate, we earn from qualifying purchases.