Error Code: F3 E1 Difficulty: Moderate
Problem: Pressure System Fault
How to Fix F3 E1 Error (Step-by-Step)
- Unplug the washer from the wall outlet to completely cut off power.
- Carefully pull the washer away from the wall to get access to the back panel and hoses.
- Inspect the black rubber drain hose for any visible kinks, twists, or blockages. Straighten the hose if it is bent.
- Ensure the drain hose is not inserted too far into the standpipe (wall drain), which can create a siphon effect. No more than 6 inches of the hose should be inside the pipe.
- If the drain hose is clear, the issue may be with the pressure switch hose inside the machine. You will need to remove the top panel by taking out the screws at the back.
- Locate the water level pressure switch, a round component with a thin tube attached to it. Check this tube for clogs, kinks, or loose connections at both the switch and the outer tub.
- If the hose appears clear and is securely connected, re-attach the top panel, plug the washer back in, and attempt to run a new cycle to see if the error is resolved.
- Turn the appliance off, wait about 2 minutes, then turn it back on.
Recommended Parts to Check
No exact official OEM part number is listed here because the correct Amana washer part can vary by complete model number. These are targeted part-category searches, not universal fit claims.
-
Whirlpool washer drain pumpCommon replacement category: Drain pumpFit note: Exact OEM part number varies by complete Amana washer model number. Confirm compatibility before buying.Why this category can matter: drain, no-spin, or water-removal symptoms after hose and filter checks.
-
Whirlpool washer water inlet valveCommon replacement category: Water inlet valveFit note: Exact OEM part number varies by complete Amana washer model number. Confirm compatibility before buying.Why this category can matter: fill, slow-fill, and valve-related symptoms after supply checks.
-
Whirlpool washer control boardCommon replacement category: Main control boardFit note: Exact OEM part number varies by complete Amana washer model number. Confirm compatibility before buying.Why this category can matter: repeating control or communication faults after connector checks.
Before ordering: match the part to the complete Amana washer model number on the appliance tag.
Still Not Working?
If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.
More options (for a better recommendation)
⚡ Don’t Risk a DIY Fail!
Get the ‘Secret Service Mode’ Cheat Sheet for your Amana model. Includes an easy-to-read list of every error code and quick diagnostic tips.
✅ Join 15,000+ DIYers • Instant PDF Download
When It’s Better to Replace Than Repair
Sometimes replacing an appliance makes more financial sense than putting more money into repairs.
Here are a few signs it may be time to shop for a new one:
For repair parts, verify exact fit with the full washer model number before buying; these links are general replacement-appliance shopping options.
- ✓Appliance over 8-10 years old
- ✓Repair cost over 50% of replacement
- ✓Multiple recent breakdowns
- ✓Major component failure
Recommended Replacement Options
Why Upgrade via Amazon?
- Fast, Scheduled Delivery – You pick the date and time
- Expert Installation – Professional setup available for most models
- Old Appliance Haul-away – They’ll take your broken unit when they leave
- Easy Returns – Buy with confidence from a leader in customer service
As an Amazon Associate, we earn from qualifying purchases.
Browse More Codes
📖 View All Error Codes
Expert: Mike Sullivan
EPA Section 608 Certified Technician with 18+ years experience.
Read Editorial Standards →Browse all Amana error codes: Amana Error Codes
Leave a Reply