How to Fix Amana Refrigerator Error REPLACE AIR FILTER

Error Code: REPLACE AIR FILTER Difficulty: Easy

Problem: The air filter needs to be replaced. The air filter icon on the control panel will be red and “Replace Filter” will appear.

How to Fix REPLACE AIR FILTER Error (Step-by-Step)

1. Have your new replacement air filter ready and confirm the error stays cleared during a full test cycle.
2. Find the air filter housing inside the refrigerator compartment. It is typically a covered panel on the upper back wall.
3. Open the filter housing door. The old filter may need to be turned counter-clockwise to unlock or simply pulled straight out.
4. Remove and discard the old filter and confirm the error stays cleared during a full test cycle.
5. Unpackage the new filter and insert it into the housing, making sure it is oriented correctly and locked into place if required.
6. Close the housing door securely and confirm the error stays cleared during a full test cycle.
7. On the main control panel, press and hold the ‘Air Filter’ or ‘Filter Reset’ button for about three seconds until the red indicator light turns off.
8. Turn the appliance off, wait about 2 minutes, then turn it back on.

Still Not Working?
If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.

Browse all Amana error codes: Amana Error Codes