⚠️ Safety Warning: Appliance repair involves electricity, gas, and moving parts. Always disconnect power before working on any appliance.
Error Code: D8 AND D9 ILLUMINATED Difficulty: Moderate
Problem: Refrigerator and defrost sensor issue.
How to Fix D8 AND D9 ILLUMINATED Error (Step-by-Step)
- Disconnect the refrigerator from power and confirm the error stays cleared during a full test cycle.
- In the fresh food section, find the refrigerator sensor, remove its cover, and replace the sensor.
- In the freezer section, remove any shelves and the back panel to get to the evaporator coils.
- The defrost sensor is a small component clipped onto the evaporator tubing. Unclip the old sensor and disconnect its wire plug.
- Clip the new defrost sensor in the same spot and connect its plug.
- Reinstall the freezer panel and shelving and confirm the error stays cleared during a full test cycle.
- Restore power to the refrigerator and check that the error codes are gone.
- Turn the appliance off, wait about 2 minutes, then turn it back on.
Recommended Replacement Part
Verified Compatible Alternatives:
- WPW10384183
Still Not Working?
If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.
Most DIY parts are $50–$250. If you have a quote, use the total.
More options (for a better recommendation)
⚡ Don’t Risk a DIY Fail!
Get the ‘Secret Service Mode’ Cheat Sheet for your Amana model. Includes an easy-to-read list of every error code and quick diagnostic tips.
✅ Join 15,000+ DIYers • Instant PDF Download
Browse More Codes
📖 View All Error Codes
Expert: Mike Sullivan
EPA Section 608 Certified Technician with 18+ years experience.
Read Editorial Standards →Browse all Amana error codes: Amana Error Codes


Leave a Reply